Lenel LNL-AL600ULX-4CB6 — UL 294 listed 6 A power supply and battery charger, assembled in a locking LNL-CTX-6 enclosure with a four-output distribution module.
It converts a 115 VAC 60 Hz feed into 12 or 24 VDC for access control hardware, in a cabinet sized to host the controllers it powers. Note what the datasheet says: the supply board output is non-power-limited, and the power-limited outputs come from the included PD4-CB module.
- Switch-selectable 12 VDC or 24 VDC, 6 A continuous at either voltage, 100 mV peak ripple
- Four individual circuit breaker outputs through the PD4-CB power-limited distribution module
- Charger for sealed lead acid or gel batteries, 0.7 A maximum charge current
- Form C contacts for AC fail and for low battery and battery presence
- LNL-CTX-6 gray enclosure 24" H × 18" W × 4.5" D, tamper switch, lock and two keys, up to six Lenel modules
The smaller sibling on the same datasheet is LNL-AL400ULX: 4 A at 12 VDC or 3 A at 24 VDC, a single Class 2 output, in the 12" × 16" × 4.5" LNL-CTX enclosure for two modules. ABT-12 is the battery option.
