G4SVWA is the Edwards Genesis LED G4 Series mass notification wall speaker-strobe with ALERT marking. Edwards orders it by lens color: G4SVWA-A (amber), G4SVWA-R (red), G4SVWA-B (blue) or G4SVWA-G (green); the part number listed here does not state the lens, so confirm the color before ordering. The speaker is field-selectable for 25 V or 70 V and for 1/4, 1/2, 1 or 2 W, and Edwards states it is approved for sleeping areas as part of an end-to-end audio system with approved audio hardware and a factory-supplied 520 Hz tone.
Specifications
| Strobe operating voltage |
16 to 33 VDC, 16 to 33 VFWR |
| Operating current rating |
28 mA at 16-33 VDC; 36 mA at 16-33 VFWR |
| Light output by lens |
Amber 75 cd; green 65 cd; blue 30 cd; red 15 cd |
| Strobe flash rate |
Approx. 1 flash per second |
| Speaker voltage |
25 VRMS or 70 VRMS, switch selectable |
| Speaker taps |
1/4, 1/2, 1 and 2 W |
| Speaker frequency response |
400 Hz to 4,000 Hz (UL rated); 100 Hz to 11,000 Hz (nominal) |
| Speech Transmission Index |
0.81 |
| Wire size |
12 to 18 AWG (0.75 to 2.50 mm²) |
| Dimensions (W x H x D) |
4.95 x 5.78 x 1.62 in (12.57 x 14.68 x 4.11 cm) |
| Compatible boxes |
2-gang and 4-inch square, at least 1-1/2 in. deep |
| Operating environment |
32 to 122 °F (0 to 50 °C), 0 to 93% RH noncondensing |
| Storage temperature |
-40 to 158 °F (-40 to 70 °C) |
Compatibility and installation notes
- Mounts on the GRSW room side wiring plate, which is required and ordered separately in packs of 10 (GRSW-10).
- Optional trim plates G4TR (red) and G4TW (white); optional G4RSB and G4WSB 4-inch surface boxes.
- Synchronization within UL requirements when used with a sync source: Edwards CC Series signal modules, booster and auxiliary power supplies, and intelligent and conventional control panels. Max. 20 ohms between any two devices.
- LED strobes can be mixed with legacy xenon strobes on the same circuit and in the same field of view.
- Covers are replaceable to change between ALERT and no marking.
Related models
- G4SVWN-A, -R, -B, -G: same speaker-strobe with no marking.
- G4SVRA-A: speaker-strobe, amber lens, ALERT marking (R version).
- G4VWA series: strobe only, ALERT marking.
Documents
Specifications from Edwards data sheet E85001-1027, Genesis LED Mass Notification Wall Mount Strobes and Speaker-Strobes, Issue 1. Manufacturer specifications are subject to change.
