System Sensor WAV-RL — red wall-mount SWIFT wireless base that turns a wired L-Series appliance into an addressable wireless one.
The base carries the radio and the batteries, and the L-Series horn, chime, strobe or combination appliance mounts onto it, so colour and signal output are chosen independently of the wireless hardware. Two sets of four batteries are used, one for the mesh radio and one for the appliance output, and the base boosts its voltage so 24 VDC options still work.
- 6 in. high by 5.1 in. wide by 1.6 in. deep; 17.6 oz with batteries
- AV output 24 VDC nominal; AV standby 6.5 mA max, AV alarm 550 mA max
- Standby 210 µA at 3.3 VDC with LED blink on; 902 to 928 MHz, 17 dBm transmit
- Eight CR123A or DL123A cells; radio batteries UL listed for at least two years
- Listed to UL 464, UL 1638 and UL 1971; 32 to 120°F, 10 to 93 percent RH
WAV-WL is the same wall base in white. WAV-CRL and WAV-CWL are the 7.4 in. ceiling bases and accept every ceiling-mount L-Series device, while this base and WAV-WL fit only wall-mount L-Series devices made after 26 April 2019, date code 9045 and later.
