System Sensor PC2WL — L-Series indoor ceiling horn strobe, two-wire, white with FIRE lettering.
The L-Series succeeded SpectrAlert Advance with lower current draw and a slimmer profile, while staying electrically compatible with legacy SpectrAlert devices. It plugs into a universal ceiling mounting plate that carries the circuit wiring, and an onboard shorting spring proves continuity before the head goes on.
- Field-selectable ceiling candela settings of 15, 30, 75, 95, 115, 150 and 177
- Horn rated 88+ dBA at 16 volts; rotary switch gives temporal or continuous tone, standard or 3.1 kHz, at high or low volume
- Automatic 12 or 24 volt selection at 15 and 30 cd; range 8 to 17.5 V or 16 to 33 V
- Certified to UL 1971 and UL 464; xenon flash tube at 1 flash per second; 32°F to 120°F
- 6.8" diameter × 2.5" high; certified for ceiling mounting only
- Works with the MDL3 synchronization module
PC2RL is the same unit in red and PC4WL the four-wire white version; SCWL is strobe-only. System Sensor bulletin M23.2SS names PC2WLED, the LED model, as the direct replacement for PC2WL.
Documents
FAQ
What replaces the PC2WL?
The PC2WL is discontinued. The direct replacement is the PC2WLED, the L-Series with LED version of the same white ceiling horn strobe.
Which candela settings are available?
Field-selectable ceiling settings of 15, 30, 75, 95, 115, 150 and 177 cd.
Does it work with older SpectrAlert devices?
Yes. The L-Series stays electrically compatible with legacy SpectrAlert devices, and synchronizes with the MDL3 module.
Can it be wall mounted?
No. The PC2WL is for ceiling mounting only; use a wall model for wall applications.