Honeywell Power HPFF8CM — 8.0 A notification appliance circuit expander and battery charger, supplied as a bare chassis for a separately ordered cabinet.
Two optically isolated inputs are triggered by the reverse polarity of a 12 or 24 VDC panel NAC, and the FireForce 8 then drives four filtered 24 VDC outputs with selectable strobe synchronisation, extending notification power past what the panel alone can carry. Honeywell states the CM ships with mounting hardware, battery cable and instructions, and no enclosure.
- Four NAC outputs, 3.0 A maximum each, 8.0 A maximum total continuous
- Four Class B, two Class A, or two Class B plus one Class A; four Class A with the HPP31076 adapter
- Auxiliary 24 VDC at 2.0 A, continuous even in alarm, from that 8.0 A
- Primary power 120 VAC, 60 Hz, 3.6 A; standby from batteries 75 mA
- Charger for 7.0 to 26.0 AH lead-acid batteries, 0.75 A maximum
- Chassis takes two 12.0 AH batteries; UL 864 9th Edition
HPFF8 is the same supply already built into a wall cabinet, taking two 18 AH batteries; HPFF8E and HPFF8CME are the 240 VAC versions. Cabinets order separately and set how many fit: CAB-A4 to CAB-D4 or EQBB-A4 to EQBB-D4, one to four units.
Documents
FAQ
Does the HPFF8CM include a cabinet?
No. The CM suffix is the chassis-mount version; up to four HPFF8CM units can be installed in a single multi-pack enclosure.
What batteries does it take?
The chassis-mount unit accommodates two 12 AH batteries, and the charger supports batteries up to 26 AH.
How can the four NACs be configured?
As four Class B, two Class A, or two Class B and one Class A; four Class A requires the optional HPP31076 adapter.
Does it work with a 12 V panel?
Yes. The HPFF8 connects to any 12 or 24 V fire alarm control panel, or runs stand-alone.
