Vesda VP-P-420 — 420 ft kit of 3/4 in. CPVC air sampling pipe for VESDA aspirating smoke detection networks.
An aspirating detector draws air continuously through its pipework, so the pipe is part of the detection system, not a conduit around it. Xtralis specifies the VESDA range in 3/4 in. iron pipe size dimensions to ASTM F442, and the pipe is pre-labeled to NFPA 72 requirements.
- Nominal 3/4 in. (20 mm); average outside diameter 1.050 in., average inside diameter 0.874 in.
- 0.168 pounds per foot; CPVC to ASTM D1784 cell classification 23477
- UL 1887 certified for plenum rated areas; flame travel 4, optical density 0.19 peak
- UL 94 V-0, limiting oxygen index 60 per ASTM D2863, ULC flame spread 0
- Operating temperature 0°F to 200°F, electrically non-conductive
- Tensile strength 8,400 psi and compressive strength 9,600 psi
The same pipe is catalogued in shorter kits as VP-P-105, VP-P-200 and VP-P-210, so check the length against the pipe schedule. A run also takes VP-COUP couplings, VP-ELB-45 and VP-ELB-90 elbows and VP-EC end caps, and Xtralis calls for a VP-CLIP-US clamp every 5 feet.
Documents
FAQ
What pipe size is the VP-P-420?
Nominal 3/4 in. (20 mm) CPVC, with an average outside diameter of 1.050 in. and inside diameter of 0.874 in.
Can it be used in plenum spaces?
Yes. It is certified to UL 1887 for plenum rated areas.
How often must the pipe be clamped?
Xtralis calls for a VP-CLIP-US clamp every 5 feet.
What fittings are used with it?
VP-COUP couplings, VP-ELB-45 and VP-ELB-90 elbows and VP-EC end caps.