VESDA VEU-A10-UL is the VESDA-E VEU aspirating smoke detector with a 3.5-inch display and an aluminum enclosure, in the version evaluated to UL 268 7th Edition. VEU is the premium detector of the VESDA-E range. Its Flair detection chamber images the sampled particles directly with a CMOS imager combined with multiple photodiodes, giving very early warning with fewer nuisance alarms. The aspirator supports up to 2,001 ft (610 m) of total pipe with branches, and AutoConfig with AutoLearn Smoke and Flow allows out-of-box commissioning from the detector itself.
Specifications
| Display |
3.5-inch LCD |
| Enclosure |
Aluminum, IP40 |
| Supply voltage |
18–30 VDC (24 V nominal) |
| Maximum current |
0.84 A quiescent, 0.88 A in alarm |
| Nominal current at 24 VDC (aspirator 1 / 5 / 10) |
0.32 / 0.41 / 0.64 A quiescent; 0.35 / 0.44 / 0.67 A in alarm |
| Pipe length by number of pipes |
1 pipe 524 ft (160 m); 2 pipes 492 ft (150 m); 3 pipes 426 ft (130 m); 4 pipes 312 ft (95 m) |
| Total pipe length with branches |
2,001 ft (610 m) |
| Maximum number of holes |
96 |
| Maximum area of coverage |
69,965 sq ft (6,500 m²) |
| Minimum airflow per pipe |
20 l/m |
| Pipe |
Inlet and exhaust 1.05 in OD (3/4 in IPS) or 25 mm; exhaust via adaptor |
| Sensitivity range |
0.0003% to 6.575% obs/ft |
| Alarm levels |
Alert, Action, Fire 1, Fire 2 |
| Relays |
7 programmable (latching or non-latching), 2 A @ 30 VDC resistive |
| Cable access / termination |
4 x 1.02 in (26 mm) entries; screw terminals 24–14 AWG |
| Event log |
Up to 20,000 events |
| Operating conditions |
Ambient 32°F to 100°F; sampled air -4°F to 140°F; 5% to 95% RH non-condensing |
| Dimensions (W x H x D) |
13.8 in x 8.9 in x 5.3 in (350 x 225 x 135 mm) |
| Weight |
11.7 lb (5.3 kg) |
| Certifications |
UL 268 7th Edition, ULC, CSFM, FM, FDA, FCC, RCM |
Features
- Flair detection technology for very early warning with minimal nuisance alarms
- Four alarm levels across an ultra-wide sensitivity range
- Flow fault thresholds per port to accommodate varying airflow
- Smart on-board filter that tracks dust count and remaining filter life
- VESDAnet communication with redundant operation during single-point wiring failures
- Ethernet for Xtralis software configuration and secondary monitoring; USB for PC configuration and firmware upgrades
- Two programmable GPIs (one monitored) for remote control
- Same mounting footprint, pipe, conduit and electrical connector positions as the VESDA VLP
- Supported by ASPIRE pipe design and Xtralis VSC software; field-replaceable sub-assemblies
Related models
-
VEU-A00-UL — the same UL VESDA-E VEU detector with LEDs instead of the 3.5-inch display
-
VEP-A10-P-UL — VESDA-E VEP with 3.5-inch display in a plastic enclosure
-
VSP-962 filter, VSP-963 aspirator, VSP-960 mounting bracket and VSP-961 US exhaust adaptor — VESDA-E spare parts
Documents
FAQ
What is the difference between the VEU-A10-UL and the VEU-A00-UL?
Both are UL versions of the VESDA-E VEU in an aluminum enclosure. The VEU-A10-UL has a 3.5-inch display, while the VEU-A00-UL uses LEDs.
Can it replace an existing VESDA VLP?
Yes. Xtralis states VEU uses the same mounting footprint, pipe, conduit and electrical connector positions as the VESDA VLP and is compatible with existing VESDAnet installations.
How much sampling pipe can it support?
Up to 524 ft (160 m) with one pipe, 312 ft (95 m) per pipe with four pipes, and 2,001 ft (610 m) of total pipe with branches.
How does it connect to the fire panel and software?
It has seven programmable relays rated 2 A at 30 VDC, two programmable GPIs, VESDAnet, Ethernet and USB for Xtralis software.