VESDA TUBING-250 — black polyethylene capillary sampling tubing, 1/2 in. OD x 3/8 in. ID, FPE rated, on a 250 ft spool, for VESDA aspirating smoke detection systems.
VESDA detectors draw air continuously from the protected area through a sampling network. Capillary tube sampling is used where sampling points must be concealed, above ceilings or inside cabinets: small tubes run from the main 3/4 in. sampling pipe to miniature sampling points at the ceiling or in the equipment being protected.
Specifications
| Part number |
TUBING-250 |
| Material |
Polyethylene, black |
| Outside diameter |
1/2 in. |
| Inside diameter |
3/8 in. |
| Rating |
FPE rated |
| Length |
250 ft |
Installation notes
- Used for capillary tube sampling (concealed, above ceiling or within cabinets)
- The VSP-878 push-in connect adaptor kit is specified by Xtralis for 1/2 in. capillary tubing
- Miniature sampling points (E700-SP) and sampling point labels are ordered separately
- Pipe network design can be verified with Xtralis ASPIRE pipe modeling software
Related products
- E700-TUBE: capillary tube, 3/8 in. internal diameter
- VP-TEE-FPT: 3/4 x 3/4 x 1/2 in. FPT tee for capillary connections
Documents
FAQ
What size is the TUBING-250?
It is black polyethylene tubing, 1/2 in. outside diameter by 3/8 in. inside diameter, FPE rated, supplied in a 250 ft length.
Where is capillary tubing used in a VESDA system?
For capillary tube sampling, where sampling points need to be concealed, above a ceiling or inside cabinets.
Which adaptor connects it to the pipe network?
Xtralis lists the VSP-878 push-in connect adaptor kit for 1/2 in. capillary tubing.