System Sensor 5623 — dual-circuit mechanical heat detector, fixed temperature, rated 135 °F.
A fusible alloy holds a spring contact against the chamber; at the rating it melts, the contact closes the circuit, and the external heat collector drops off to mark the unit in alarm. Dual circuit means two independent normally open contact sets on the one thermal element, so the detector can sit on a panel initiating circuit and switch an auxiliary device at the same time.
- Fixed temperature only, alarm at 135 °F (57 °C); no rate-of-rise element
- UL protected spacing 25 ft × 25 ft on a 10 ft ceiling
- Maximum installation temperature 100 °F (38 °C)
- Contacts 6–125 VAC at 3 A, 6–28 VDC at 1 A, 250 VDC at 0.1 A
- Terminals take 14–22 AWG; reversible bracket, flush or surface
- Marked FX on the housing; non-resettable and not field testable
The 5624 is the same detector rated 194 °F. The 5621 and 5622 swap the fixed element for a restorable fixed plus rate-of-rise combination, marked FX/ROR and rated 50 ft × 50 ft. The 5603 is the single-circuit 5623.