Simplex 4100-6308 is the ES Net NIC dual-channel single-mode fiber media card for Simplex 4100ES fire alarm control units. It mounts on an ES Net network interface card (NIC) and gives that node two fiber ports for the ES Network.
ES Net is a 100 Mbps IP-based fire alarm network that supports up to 99 nodes. Fiber links give better noise immunity and longer runs than Ethernet or DSL, and single-mode fiber gives the longest distance of the three media options.
Specifications
| Media |
Dual-channel single-mode fiber, 9/125 µm |
| Port type |
100BASE-BX bidirectional fiber optic port |
| Connector |
SC-UPC |
| Wavelengths |
Port A: transmit 1310 nm, receive 1550 nm; Port B: transmit 1550 nm, receive 1310 nm |
| Maximum distance |
82,000 ft (25 km), 22 dB maximum total attenuation |
| Optical launch power |
-9 dBm minimum, -3 dBm maximum |
| Current |
135 mA at 24 VDC (alarm/supervisory) |
| Mounting |
On a 4100ES ES Net NIC, up to two media cards for each NIC |
Installation notes
- Select a media card for each network connection; single-mode, multi-mode, Ethernet and DSL cards can be chosen per link.
- Field connections require correct port pairing. Refer to the ES Net dual-channel fiber, Ethernet and DSL media card installation instructions (579-1258).
- For retrofit jobs where ST connectors are already installed, Simplex offers fiber media service kits.
Related models
-
4100-6309 — ES Net NIC dual-channel multi-mode fiber media card.
-
4007-6308 — the single-mode fiber media card for the 4007ES.
-
4100-6310 — flat ES Net NIC for the 4100ES that carries the media cards.
Documents
FAQ
What panel does the 4100-6308 fit?
It is the ES Net media card for the 4100ES and mounts on an ES Net NIC, up to two media cards for each NIC. The 4007ES uses the 4007-6308.
How far can a single-mode link run?
Up to 82,000 ft (25 km) on 9/125 µm single-mode fiber, with a maximum total attenuation of 22 dB.
What connector does it use?
SC-UPC connectors on a 100BASE-BX bidirectional fiber port. Simplex offers fiber media service kits for retrofit jobs where ST connectors are already installed.
How much current does it draw?
135 mA at 24 VDC.