Dual input monitor module in white supports NO devices only, requires two consecutive addresses. Mounts in a 4 square electrical backbox n
The MRI-M500DMAP is an Advanced Protocol dual monitor module for intelligent two-wire (SLC) systems. It provides two independent two-wire initiating device circuits at two consecutive addresses for monitoring normally open contact devices, and mounts in a 4 in. square electrical box.
Key Features
- Two independent 2-wire initiating device circuits (IDC) at two consecutive addresses
- Monitors normally open contact fire alarm and supervisory devices
- Rotary switches for address entry: 01-159 in AP mode, 01-99 in CLIP mode
- Panel-controlled status LED
- SEMS screws for wiring
- Mounts in a 4 in. square junction box
Specifications
| Normal operating voltage |
15 to 32 VDC |
| Maximum current draw |
6.4 mA (LED on) |
| Average operating current |
750 uA (LED flashing) |
| EOL resistance |
47K ohms |
| Maximum IDC wiring resistance |
1,500 ohms |
| Maximum IDC voltage |
11 V |
| Maximum IDC current |
240 uA |
| Temperature range |
32 F to 120 F (0 C to 49 C) |
| Humidity |
10% to 93% non-condensing |
| Dimensions |
4.5 in. H x 4.275 in. W x 1.4 in. D |
| Mounting |
4 in. square by 2.125 in. deep box |
| Color |
White |
Compatible With
- Secutron / Mircom intelligent panels with AP or CLIP SLC loops
- SMB500 electrical box
Documents & Downloads
