SDi M8 Smoke Centurion — aerosol smoke for the functional testing of smoke detectors, sold in cases of 12 cans.
Functional testing proves that a detector responds to smoke and signals the panel, which a magnet or a self test button cannot do. It is applied by hand or through a Solo dispenser on an access pole, so ceiling detectors are reached from floor level. It is silicone free, because silicone residue builds up in a sensing chamber and degrades it.
- UL Certified as Fire Alarm Equipment, category 77TL, Aerosol Smoke Detector Tester
- ULC Certified as Automatic Fire Detector Accessory, category 77TL
- Silicone free; no CFCs and a low GWP propellant
- By hand, or with the Solo 330 dispenser for detectors to 4 in. across and the Solo 332 to 7 in.
- Extremely flammable aerosol; GHS signal word Danger, hazard statement H222
- Made by Detectortesters, No Climb Products Ltd; supplied by SDi LLC
Do not confuse it with Solo A10 (SOLOA10) and Solo C6 (SOLOC6): both are non flammable where this one is not, and the C6 tests carbon monoxide rather than smoke.
