SDi BLOWOUT — 10 oz. hand-held air duster, single can, catalogued by SDi as a detector duster.
SDi lists BLOWOUT in its own product guide under Detector Duster: a large 10 oz can, described as perfect for use with fire alarm test equipment, with no CFCs and a silicone-free formulation, so nothing is left on a smoke chamber or a board. It is worth being plain about the contents. The safety data sheet for Blow Out Duster 152A 10 oz gives them as 100% 1,1-difluoroethane, HFC-152a, CAS 75-37-6, the same propellant as office canned air, and classifies it as an extremely flammable aerosol (H222) holding gas under pressure (H280).
- SDi product number 152-BLOWOUT-024; SDi, LLC, Neptune, NJ
- Composition: 1,1-difluoroethane, 100%
- Do not expose to temperatures above 120 °F (49 °C); keep away from heat, sparks and open flame
- Labelled as a consumer product under US CPSC rules
If site rules bar flammable aerosols, SDi catalogues SOLOA7 on the same page as a non-flammable detector duster. Treat this as a cleaning consumable rather than certified fire equipment: SDi publishes no pressure or blast duration figures for it, so none are quoted here.
FAQ
What is BlowOut used for?
SDi describes BlowOut as a hand-held air duster that is perfect for use with fire alarm equipment, for detector removal and cleaning work.
Does it reach tight spots?
Yes. BlowOut comes with a directional straw for access to hard to reach areas.
How is it packed?
This product is a single 10 oz can; SDi also sells BlowOut 10 oz cans in cases of 12.
