Notifier FST-951H-IV is an intelligent addressable plug-in heat detector from the Notifier FST-951 Series, in ivory. It has a fixed high-temperature setpoint of 190°F (88°C) and connects to the two-wire SLC loop of Notifier intelligent panels using FlashScan or CLIP protocol.
The detector's address is set with rotary decimal switches, and it plugs into a separate base. It replaces the FST-851H.
Features
- Fixed high-temperature setpoint of 190°F (88°C)
- Low-profile design in ivory
- Rotary decimal address switches
- LEDs blink when polled and latch on in alarm
- Plugs into B300-6 or B501 series bases
- Remote LED output for the RA100Z annunciator
Specifications
| Setpoint |
190°F (88°C) |
| Operating temperature |
-4 to 150°F (-20 to 66°C) |
| Height |
2.0 in. (5.3 cm); the base sets the diameter |
| Spacing |
UL 50 ft center-to-center; FM 25 x 25 ft |
| Humidity |
10 to 93% non-condensing |
| Color |
Ivory |
| Approvals |
UL/ULC S747, FM approved, CSFM 7270-0028:0502 |
Specifications taken from the manufacturer data sheet DN-60975.