Notifier CPU-N16LD — INSPIRE Series N16x fire alarm control panel CPU chassis with the 10 in. colour touchscreen display.
This is the panel itself in chassis form, not an add-on annunciator. Notifier lists it under Main System Components as an intelligent fire alarm with one SLC loop, four NACs and a power supply, for a CAB-5 cabinet.
- One Signaling Line Circuit, expanding over the CLP bus to ten SLM-318 modules and 3,180 addressable devices
- PMB power supply gives 3 A standby and 8.5 A alarm, four power-limited NACs at 1.5 A each selectable Class A or B, and two 24 VDC aux outputs
- Mains 120 VAC at 2.5 A or 240 VAC at 1.25 A; charger 7 to 100 AH
- Core board carries the AIO bus, a NUP port, USB for VeriFire Tools and the OCuLink display link
- Requires a DP-T2A dress panel to mount the display; the CAB-5 backbox and door sell separately from each other, and batteries separately
Order the right member: CPU-N16LND is the same assembly without a display, for a network node, and CPU-16-RTO is the CAB-4 retrofit needing DP-T2A-CB4. N16E and N16E-R are pre-built enclosed panels, not a chassis.
Documents
FAQ
What is the CPU-N16LD?
It is the N16x with display: an intelligent fire alarm with one SLC loop, 10 in. touchscreen display, four NACs and power supply, chassis mounted for a CAB-5 Series cabinet.
How far can the N16x expand?
The N16x supports up to 10 SLM-318 modules for up to 3,180 intelligent addressable devices, and power can be expanded from one to three PMB-AUX power supplies.
Is there a version without a display?
Yes. The CPU-N16LND is the N16x without display, for use as a network node.
Does it support wireless devices?
Yes, INSPIRE panels support SWIFT Smart Wireless Integrated Fire Technology.
