Napco SLE-MAX2-CFB — StarLink Fire MAX 2 commercial fire alarm communicator in a red metal enclosure, dual SIM across Verizon and AT&T, powered from the fire alarm panel.
It captures the report from any 12 V or 24 V fire alarm control unit and sends it to the central station over cellular, over IP, or over two supervised cellular carriers at once, meeting a dual path requirement without involving the building network.
- Dual SIM, dual path: sole path cell, cell and IP, or Super Dual supervised dual cell
- Locks to the stronger carrier at power-up, then rechecks it
- 5G LTE-M cellular, described elsewhere by Napco as CAT-M1
- Panel powered: 85 mA standby and 325 mA peak transmission
- Four supervised programmable zone inputs on 10 K resistors, two Form C relay outputs, two telco jacks
- Reports Contact ID, SIA or 4/2; supervisory check-in at 5 minutes, 1, 6 or 24 hours by plan
- UL 864 10th Edition, UL 985, UL 1023 and UL 2610; NFPA 72 2010 through 2022
No Power Supply names the sibling, not a missing part: two antennas are supplied and the unit runs on panel power by design. The SLE-MAX2-CFBPS adds an SLE-ULPS-R supply and transformer inside the same housing; the SLE-MAX2-FIRE is the plastic version.
