The Mircom UDACT-300A lets a Mircom panel report to a central station over two telephone lines. This digital alarm communicator transmitter/dialer module allows FA-1000 Series, FX-2000 and FleX-Net Series fire alarm control panels to transmit alarm, supervisory and trouble information to a monitoring facility. It mounts in a dedicated location in the panel's main chassis and takes its power from the host panel.
Key Features
- Dual telephone line operation with line supervision at roughly one-minute intervals
- Reports in Ademco Contact ID and SIA-DCS formats
- DACT mode sends common events; UDACT mode sends point-specific alarm, supervisory, waterflow and trouble data
- ZDACT feature groups FX-2000/FleX-Net input circuits into software zones for reporting
- Programmed on site with the CFG-300 tool or UIMA, or remotely by modem (passcode protected)
- 500-entry event logs, reviewable locally or remotely
Specifications
-
Manufacturer: Mircom
-
Part Number: UDACT-300A
-
Panel Interface: RS-485 data link
-
Telephone Lines: 2
-
Reporting Formats: Ademco Contact ID, SIA-DCS
-
Current Consumption: Standby 40 mA; Alarm 60 mA
-
Power: Supplied by host fire alarm control panel
Compatibility
For Mircom FA-1000 Series, FX-2000 and FleX-Net Series fire alarm control panels. The CFG-300 Configuration Tool is needed for on-site programming.
