LNL-1200 is the Lenel (LenelS2) Output Control Module (OCM) for OnGuard access control systems. It provides 16 programmable Form-C relay outputs that can be configured fail-safe or fail-secure, and each relay responds to the On, Off and Pulse OnGuard commands. The OCM talks directly to the Intelligent System Controller (ISC) over 2-wire or 4-wire RS-485 and counts as one device on the ISC. Lenel publishes it in Series 2 and Series 3 versions; the figures below are from the LNL-1200 Series 2 data sheet, so check the series printed on your board.
Specifications
| Outputs |
16 Form-C relays, 5 A at 30 VDC, resistive |
| Inputs |
2 unsupervised, dedicated to cabinet tamper and UPS fault monitoring |
| Primary power |
12 to 24 VDC ±10%, 1,100 mA maximum; 12 VDC at 850 mA nominal; 24 VDC at 450 mA nominal |
| Communication |
RS-485, multidropped, 2-wire or 4-wire |
| OCMs per ISC |
Up to 16 |
| Elevator control |
Up to 128 floors |
| Board size |
6 in. (152 mm) W x 8 in. (203 mm) L x 1 in. (25.4 mm) H |
| Weight |
14 oz (400 g) nominal |
| Operating temperature |
32 to 158 °F (0 to 70 °C) |
| Storage temperature |
-67 to 185 °F (-55 to 85 °C) |
| Humidity |
0 to 95% RH noncondensing |
| Compliance |
FCC Part 15, CE, RoHS, UL 294, UL 1076, ULC CSA-C22.2, CAN/ULC-S319-05, cUL/ORD-C1076 |
Compatibility and installation notes
- On-board termination jumpers and DIP switch addressing; status LEDs for host communication, heartbeat and relay status.
- Lenel lists the LNL-AL400ULX and LNL-AL600ULX-4CB6 power supplies with enclosures for this board.
- LenelS2 states that the LNL-1200-S3 (Series 3) is suitable as a replacement for Series 1 and Series 2 boards; Series 3 adds AES 128-bit or 256-bit encryption depending on ISC and OnGuard version.
Related models
- LNL-1200-S3: Series 3 Output Control Module.
Specifications from LenelS2 data sheet "LNL-1200 Series 2" and LenelS2 product leaflet LNL-1200-S3 (updated 29 March 2024). Manufacturer specifications are subject to change.