Gamewell-FCI MMI-10F Multi-Mod-10 Input Module
The multi-mod ten input monitor module that provides ten (10) Style B (Class B) or five (5) Style D (Class A) supervised initiating device circuits (IDC)
The Gamewell-FCI Velocity® Series, multi-mod ten input monitor module (MMI-10F) provides ten Style B (Class B) or five Style D (Class A) supervised initiating device circuits (IDCs) that are suitable for a wide range of monitoring applications.
The Velocity Series use a communication protocol that substantially increases the speed of communication between the sensors and certain Gamewell-FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel’s microprocessor stops the group poll and concentrates on the single device. The net effect is response speed up to five times greater than earlier designs.
Features & Benefits:
- Each MMI-10F monitor module provides ten (10), Style B (Class B) or five (5), Style D (Class A) individually addressable, individually programmable initiating device circuits.
- Ideal for applications requiring monitoring of normally open contact devices.
- Removable wiring terminal blocks allow ease of installation and servicing.
- Terminal blocks can accommodate 12 to 18 AWG wires.
- Flexible jumper configuration feature allowing one or two monitoring circuit addresses to be disabled.
- Individual LED indicators.*
- Ideal for retrofit applications.
- As many as sixty (60), initiating device circuits in one (1), 12” x 24” x 6.5” cabinet.
- Two (2), mounting cabinets available for two (2), (MBB-2 cabinet) to six (6), (MBB-6 cabinet) MMO-6RS.
- Bicolor LEDs flash green whenever the sensor is addressed, and light steady red on alarm.
- *Note: Only the red LED is operative in panels that do not operate in Velocity® mode.
Certifications:
- UL: S1913
- FM: 3023594
- MEA FDNY: 219-02-E Vol VI
- CSFM: 7300-1703:0124
- ISO 9001 Certification
