Gamewell-FCI GWPID-95P — the PID-95P addressable point identification device, mounted on a 4.688 in. plastic plate.
The PID-95P interfaces a non-powered, normally-open dry contact, such as a waterflow switch or a manual station, to the analog SLC of a Gamewell-FCI 600 Series or ILI95-E3 Series panel. When the contact closes it reports its address, and the panel activates the outputs programmed for that point. Gamewell-FCI documents list it as PID-95P.
- Monitors one normally-open dry contact on a single Style B circuit; two-wire SLC connection
- Address and priority interrupt (DIP switch 8) set on one onboard DIP switch
- LED for alarm annunciation
- Surface or flush mounting on a 4 × 4.688 in. double-gang backbox; 70839 trim ring for flush mounting
- Alarm current 0.0015 A; 32 to 120 °F, 93% RH non-condensing
- UL 864 9th Edition; UL certified S521, FM and FDNY approved, CSFM 7300-1703:0135
The GWPID-95 (PID-95) is the version without the plate, for a 4 in. square backbox with a blank cover plate. CS-2044 names only the 600 Series and ILI95-E3 Series panels for both.