Fire-Lite ZNAC-PS — optional Class A output converter module for the FL-PS and HPF-PS Series remote power supplies.
PS Series supplies ship wired for Class B notification appliance circuits. The ZNAC-PS plugs onto connector J8 on the power supply board and converts the outputs to Class A without sacrificing a circuit, so a 6 amp supply keeps all five and a 10 amp supply keeps all seven.
- Mounts on connector J8 of the PS Series main board
- Converts all five outputs (FL-PS6, HPF-PS6) or all seven (FL-PS10, HPF-PS10) to Class A
- Class A power supervision on outputs 1 and 2 when set for resettable or non-resettable auxiliary power
- Two slide switches select NAC1 or AUX1 and NAC2 or AUX2, and must match the supply settings
- The remaining outputs have no slide switch and no Class A power supervision
- Not intended for Class D door holder operation
Not the ZNAC-92, which serves the MS-9200UDLS panel and converts four Class B circuits to four Class A. PS-MOUNT is the kit for fitting this card beside an addressable module; EOLR-1 is an end-of-line relay for four-wire detector power.
Documents
FAQ
Which power supplies accept the ZNAC-PS?
The FL-PS and HPF-PS Series remote power supplies, such as the FL-PS6, HPF-PS6, FL-PS10 and HPF-PS10.
Does it reduce the number of outputs?
No. It converts all five outputs on a 6 A supply or all seven on a 10 A supply to Class A.
Where does it mount?
On connector J8 of the PS Series main board.
Can it be used for door holder circuits?
No. It is not intended for Class D door holder operation.