The Edwards BPS10A/230 is the 220 V version of the 10 amp Remote Booster Power Supply. It supplies filtered, regulated and supervised 24 VDC to extra notification appliance circuits or auxiliary loads wherever the main fire alarm system needs more power. It is used with Edwards life safety systems for NAC expansion, mass notification and related applications.
Key Features
- 10 A total output across four Class B NACs, convertible to two Class A, at 3 A max. per circuit
- Dual input circuits can activate outputs in one or two groups
- Synchronizes Genesis and Enhanced Integrity notification appliances
- NACs selectable for continuous, 3-3-3 temporal, or following the host panel's coded NAC
- Seven onboard diagnostic LEDs, self-restoring overcurrent protection and ground fault detection
- Lockable steel cabinet with room for two 10 Ah batteries and up to three Signature modules
Specifications
-
Manufacturer: Edwards
-
Part Number: BPS10A/230
-
Type: 10 A remote booster power supply, 220 V
-
AC Input: 220–240 VAC, 50/60 Hz, 580 W
-
Output: 24 VDC filtered/regulated; 3.0 A max. per circuit, 10 A total
-
Activation Input: 6–45 VDC filtered/regulated or 11–33 VDC full-wave rectified
-
Auxiliary Output: Dedicated 200 mA, 24 VDC
-
Trouble Relay: 2 A @ 30 VDC
-
Batteries: Up to 10 Ah in cabinet; up to 24 Ah in an external cabinet for fire applications
-
Operating Temperature: 32°F to 120°F (0°C to 49°C)
-
Wire Size: 18–12 AWG
-
Certifications: UL 864 9th edition; UL, ULC, CSFM
Compatibility
Can be activated from a main system NAC and/or Edwards Signature Series control modules. Provides Genesis and Enhanced Integrity strobe synchronization.
Documents
FAQ
How is the BPS10A/230 activated?
From a main system NAC and/or Edwards Signature Series control modules. The dual input circuits accept 6 to 45 VDC filtered-regulated or 11 to 33 VDC full-wave rectified.
Can the NACs be wired Class A?
Yes. The four Class B NACs can be converted to two Class A NACs, each rated 3 A, with total current limited to 10 A.
Which batteries fit?
The cabinet holds two 10 Ah batteries; Edwards lists the 12V10A battery, two required, and BC-1 or BC-2 battery cabinets for larger batteries.
What is the difference from the BPS10A?
The BPS10A/230 is the 220 V model of the 10 A booster power supply; the BPS10AC is the ULC model.