Eaton Wheelock ELSTR — a 24 V Wheelock Eluxa LED strobe for indoor wall mounting, red housing, clear lens, marked FIRE.
This is the strobe-only member of the Eluxa family: the same single-gang enclosure and hinged mounting plate as the ELHS horn strobe and ELHN horn, with no audible section. Candela is set on a tamper-resistant slide switch, and the 20 ms flash meets NFPA 72 2016, so Eluxa may share a field of view with xenon appliances.
- Six wall candela settings: 15, 30, 75, 110, 135 and 185 cd
- Regulated 16 to 33 VDC or VFWR; 0.017 A at 15 cd to 0.161 A at 185 cd
- 4.79 × 2.76 × 1.18 in., 0.35 lb; plate included
- Strobe output rated to UL 1971, UL 1638 and ULC-S526
- 32 to 122 °F indoor; terminals for #12 through #18 AWG
- Synchronizes on the Wheelock patented protocol with DSM modules or PS supplies
Lettering and color are fixed by the catalog number. ELSTW is white; ELSTR-A, ELSTR-AL and ELSTR-N are the same red wall strobe marked AGENT, ALERT or blank. ELSTRC is the ceiling model, topping out at 150 and 177 cd. ELHSR adds a horn and draws more at every setting.
FAQ
Can the ELSTR share a field of view with xenon strobes?
Yes. Eluxa strobes meet the 20 ms flash duration requirement of NFPA 72 2016, and Eaton states they can be installed in the same zone and field of view as Wheelock RSS and Exceder LED3 strobes.
How do I synchronize the ELSTR?
Use Wheelock DSM sync modules, PS power supplies or SAFEPATH products, or a panel with the built-in Wheelock patented sync protocol.
What backbox does it mount to?
The ELSTR is for indoor wall mounting only. It mounts to a single-gang backbox, an ELSBB backbox, or a 4 in. square box with the adapter kit; a mounting plate is included.
How much current does it draw?
UL maximum current at 16 to 33 VDC is 0.017 A at 15 cd and 0.161 A at 185 cd.