DITEK DTK-TSS4D — series-connected 120 Vac surge protective device in a NEMA 4X enclosure, with Form C dry contacts for remote reporting of protection status.
Part of the DITEK Total Surge Solution range, it wires in series between the branch circuit and the load, so the whole supply passes through its multi-stage hybrid circuit rather than shunting to ground beside it. UL 1283 filtering attenuates EMI and RFI on the way through.
- 120 Vac single phase; MCOV 150 V; maximum continuous current 20 amps
- Surge current rating 50,000 A; nominal discharge current 10 kA; SCCR 10,000 A
- Voltage protection rating 600 V line-ground and line-neutral, 1000 V neutral-ground
- EMI and RFI attenuation up to -35 dB from 100 kHz to 100 MHz
- UL 1449 4th Edition Type 2 SPD, UL 1283, CSA C22.2 No. 269.2-17
- NEMA 4X polycarbonate, 9.38" × 6.25" × 3.6", 2.2 lb; 32°F to 104°F
Order by the full part number. DITEK publishes separate sheets for DTK-TSS1, DTK-TSS2, DTK-TSS3, DTK-TSS5 and DTK-TSS6 in the same range, and the Form C dry-contact circuit is what this data sheet adds.
Documents
FAQ
What is the DTK-TSS4D used for?
It provides surge protection for dedicated 120 Vac circuits that feed fire alarm control panels, industrial control panels and other critical equipment.
Can the surge protection status be monitored remotely?
Yes. It has Form C dry contacts for remote monitoring, plus a diagnostic LED that shows system power and SPD function.
Can it be installed outdoors?
Yes. The NEMA 4X polycarbonate enclosure is intended for outdoor installations. It is rated for 32°F to 104°F and up to 95% humidity, non-condensing.
What current and surge ratings does it have?
Maximum continuous current is 20 A at 120 Vac single phase. Surge current rating is 50,000 A, with a 10 kA nominal discharge current.