Det-Tronics UD10A5N28W2 (010765-006) is a FlexVu UD10 DCU Emulator explosion-proof universal display unit. Its LON interface board digitizes the 4-20 mA signal from the attached gas detector and sends the value over the LON to an Eagle Quantum Premier (EQP) controller, while the backlit LCD shows gas level, gas type and units locally. It serves a single detector, mounted directly on the unit or remotely through a sensor termination box.
Specifications
| Operating voltage |
24 Vdc nominal (18 to 30 Vdc) |
| Power |
1.3 W nominal, backlight off, heater off; 2 W with backlight on; heater adds 4 W |
| Communication |
LON, transformer isolated, 78.5 kbps; HART slave interface |
| Operating temperature |
-40 to +75 °C (-40 to +167 °F) |
| Humidity |
5 to 95% RH |
| Housing |
Epoxy-coated aluminum or 316 stainless steel; NEMA/Type 4X, IP66 |
| Wiring |
14 to 18 AWG; 3/4 in. NPT or M25 conduit entries |
| Hazardous location |
FM approved Class I, Div. 1, Groups B, C, D (T5) |
| Warranty |
36 months |
Features
- Four internal magnetic switches for non-intrusive menu access and calibration
- Event, fault and alarm logs on board
- Works with Det-Tronics GT3000, PIR9400, PIRECL, PIRDUCT, LS2000 and CGS detectors, or generic linear 4-20 mA sensors
- Backlit, heated display for cold-weather readability
