Altronix AL842ULADA is a voltage-regulated remote NAC power extender with an 8 A, 24 VDC output. It connects to any 24 volt fire alarm control panel and is used to expand notification appliance circuits (supports ADA requirements) and to provide auxiliary power to system accessories. It is supplied in a red enclosure that holds two 12 VDC/18 Ah batteries.
Specifications
| Input |
120 VAC, 60 Hz, 5 A |
| Output |
24 VDC, 8 A total alarm current, 2.5 A max per output |
| NAC outputs |
Four Class B or four Class A (or two plus two Class B), programmable, supervised |
| Auxiliary outputs |
Two at 1 A each |
| Trigger inputs |
Two Class A or Class B inputs, 8-30 VDC, 6.5 mA from the panel; two NC dry contact inputs |
| Trouble outputs |
Form C AC fail and battery contacts |
| Battery |
Sealed lead acid or gel; batteries sold separately |
| Enclosure |
18 x 14.5 x 4.5 in (457 x 368 x 114 mm) |
| Operating temperature |
0 to 49 °C (32 to 120 °F) |
| Agency approvals |
UL 864, NYC MEA, FM, CSFM |
Features
- Sync mode for 2-wire horn/strobes with Potter/Amseco, Gentex, System Sensor and Cooper Wheelock protocols
- Temporal Code 3, steady and input-to-output follower modes
- Output supervision steered to input 1 or input 2
- Signal circuit trouble memory and ground fault detection
- Thermal and short circuit protection with auto reset
- Lifetime warranty