Altronix AL400ULM — M Series access control power supply and charger with a five-output distribution module.
The unit converts 115 VAC into five individually protected, power-limited Class 2 outputs feeding mag locks, electric strikes and door holders in fail-safe or fail-secure mode. A supervised normally open or closed trigger, or polarity reversal from a fire alarm panel, releases the fail-safe outputs.
- 4 A at 12 VDC or 3 A at 24 VDC, selectable; five auto-resettable PTC outputs
- 115 VAC 60 Hz input, 3.5 A draw; 5 A input and 15 A battery fuses
- Takes two 12 VDC 7 Ah batteries, sold separately; charger 0.7 A maximum
- AC fail, low battery and battery presence supervision; form C relay 1 A at 28 VDC
- UL 294, cUL CSA C22.2 No. 205, UL 1481, UL 603, UL 1069; CSFM 7315-1335:0100
- BC300 enclosure 13.5 × 13 × 3.25 in., 7.6 lb; 32 °F to 120 °F
AL400ULMX is the same electronics in the larger cabinet taking two 12 Ah batteries, and an R suffix gives a red enclosure. AL300ULM and AL600ULM are the 2.5 A and 6 A members; AL400ULX is the single-output supply without the MOM5 board.
Documents
FAQ
How is the AL400ULM tied to the fire alarm?
The outputs are triggered by a supervised normally open or normally closed input, or by polarity reversal from a fire alarm control panel. A form C dry relay output can be used for HVAC shutdown, elevator recall or auxiliary devices.
Can it run at 24 VDC?
Yes. Output is switch selectable: 4 A at 12 VDC or 3 A at 24 VDC.
Is a larger enclosure available?
Yes. Add an X suffix (AL400ULMX) for the larger enclosure, or an R suffix for a red enclosure.
What other M Series sizes exist?
The AL300ULM provides 2.5 A and the AL600ULM provides 6 A at 12 or 24 VDC.