Altronix AL1024ULX — 24VDC single-output power supply/charger in a BC400 enclosure, certified for both fire protective signaling and access control.
Installers add this supply when a notification circuit or a bank of door hardware has outgrown what the panel itself can deliver. It carries UL 1481 for fire protective signaling and UL 294 for access control system units, so one model covers both roles. Transfer to standby batteries on AC loss is instantaneous.
- 24VDC at 8A continuous, 10A in alarm; 10A continuous with no batteries connected. Single fused, non power-limited
- Input 115VAC 60Hz, 4.2A max, 5A/250V fuse
- Charges sealed lead acid or gel batteries, 3.6A max; two 12AH batteries fit inside
- Form "C" AC fail and battery contacts, 1A at 28VDC
- Enclosure 15.5" × 12.23" × 4.5", indoor use only; UL 294, UL 1481, CSFM, MEA, FM
In fire alarm service the outputs are Special Application only, so confirm your appliances appear on the Altronix compatible device list. Batteries are not included.
Documents
FAQ
Which standards does the AL1024ULX meet?
UL 294 for access control system units and UL 1481 for power supplies for fire protective signaling systems, plus cUL; the AL1024ULX is also CSFM, MEA (NYC) and FM approved.
What batteries can it charge?
Sealed lead acid or gel batteries: two 12 AH, 12 VDC batteries fit in the enclosure, and 40 AH or 65 AH sets need a separate enclosure. Batteries are sold separately.
What supervision outputs does it have?
Form C contacts for AC failure and for battery fail and battery presence.
What input power does it need?
115 VAC, 60 Hz, 4.2 A maximum, with a 5 A/250 V input fuse.