Potter CR-200MP THERMOFLEX MP Series Dual Action Heat Detector

Potter CR-200MP THERMOFLEX MP Series Dual Action Heat Detector, 200°F

The MP Series is a standard THERMOFLEX® single circuit, Normally Open contacts detectors, in which the connectivity is modified with pigtail leads that extend through a seal plate.

This provides for enhanced protection against corrosive or moisture-laden environments. This detector is suitable for use in areas where condensation or corrosion can harm circuit wiring connected to standard terminals. Its seal plate (with extended pigtail leads) will mount onto a typical cast exterior back box.

The detector is an initiating device connected to a fire alarm system's input circuit.

The internal contacts are normally open and will close when the detector operates either on a rate of temperature increase or if the releasing temperature is reached. It is often installed with an addressing module if it is to be annunciated as a specific room or space, e.g. electrical room, garbage compactor, etc.

With its non-metallic diaphragm, the detector can operate normally at low temperatures, making it suitable for non-heated or chilled environments including garages and carports.