{"title":"Testers","description":"\u003cp\u003eTest equipment for commissioning and for the periodic inspection that codes require. This covers functional testers for smoke, heat and CO detectors, test gas and aerosol, telescopic access poles, sensitivity readers and calibration gas.\u003c\/p\u003e \u003cp\u003eThe distinction that matters: a \u003cstrong\u003efunctional test\u003c\/strong\u003e confirms the detector responds and the panel receives the signal, while a \u003cstrong\u003esensitivity test\u003c\/strong\u003e measures whether the detector is still within its listed range. Codes generally require both, on different schedules.\u003c\/p\u003e \u003cp\u003eMatch the test method to the detector: aerosol for photoelectric, heat for thermal, the correct gas for the specific gas sensor. Using the wrong stimulus either fails to trigger the device or contaminates it.\u003c\/p\u003e","products":[{"product_id":"system-sensor-m02-04-00-replacement-test-magnet","title":"System Sensor M02-04-00 Replacement Test Magnet","description":"\u003cp\u003e\u003cstrong\u003eSystem Sensor M02-04-00\u003c\/strong\u003e — hand-held detector test magnet.\u003c\/p\u003e\u003cp\u003eMost System Sensor and Honeywell-family smoke detectors carry a built-in functional test switch operated by an external magnet: hold the magnet to the marked spot on the cover and the internal reed switch trips the head, proving the device and its report to the panel without canned smoke or heat.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNamed as the test magnet accessory in System Sensor literature for the Select Series B300 and B200S mounting bases\u003c\/li\u003e\n\u003cli\u003eAlso listed for SD365 and SD365CO addressable photoelectric detectors\u003c\/li\u003e\n\u003cli\u003eAlso listed for InnovairFlex duct smoke detectors D4120, D4120W and DNR\u003c\/li\u003e\n\u003cli\u003eAlso listed for Honeywell FSP-951, FST-951, FST-851, FPC-951, NP-200 and Silent Knight SK-PHOTO and SK-FIRE-CO detectors\u003c\/li\u003e\n\u003cli\u003eTelescoping-handle version for high ceilings: M02-09-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck the installation sheet for your own detector before ordering: not every System Sensor head calls out this magnet part number.\u003c\/p\u003e","brand":"System Sensor","offers":[{"title":"Default Title","offer_id":43132857712864,"sku":"M02-04-00","price":9.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/system-sensor-fire-alarms-default-title-system-sensor-m02-04-00-replacement-test-magnet-34518678536416.jpg?v=1793439432"},{"product_id":"system-sensor-m02-09-00-test-magnet","title":"System Sensor M02-09-00 Detector Test Magnet with 32 in Telescoping Handle","description":"\u003cp\u003e\u003cstrong\u003eSystem Sensor M02-09-00\u003c\/strong\u003e — detector test magnet on a 32\" telescoping handle.\u003c\/p\u003e\u003cp\u003eMany System Sensor and Honeywell-brand detectors carry a built-in functional test switch that closes when a magnet is held to the marked spot on the housing. The detector then stimulates its own electronics and reports an alarm, exercising the head, its base connections and the signalling path in one action. The handle is what separates this number from the bare magnet.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eListed as an accessory for the System Sensor 100 Series detectors, 2151 and 2151T\u003c\/li\u003e\n\u003cli\u003eListed for the 200 Series bases: B501, B210LP, B224RB relay, B224BI isolator, B200S and B200SR sounders\u003c\/li\u003e\n\u003cli\u003eListed for the Fire-Lite SD365 Series and the Notifier Self-Test Series\u003c\/li\u003e\n\u003cli\u003eListed for the Gamewell-FCI Velociti Series 3 thermal detectors\u003c\/li\u003e\n\u003cli\u003eThe magnetic test is a functional test of the detector and its reporting path, not a sensitivity check\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe part to compare it with is the plain magnet without a handle, and there are two numbers for it: \u003cstrong\u003eM02-04-00\u003c\/strong\u003e in the 200 Series base sheet and the Fire-Lite and Notifier lines, and \u003cstrong\u003eM02-04-01\u003c\/strong\u003e in the 100 Series sheet and the Gamewell-FCI thermals. For lifting a head out of its base, the tools are the XR-2B head and XP-4 pole.\u003c\/p\u003e","brand":"System Sensor","offers":[{"title":"Default Title","offer_id":43132858007776,"sku":"M02-09-00","price":35.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/system-sensor-fire-alarms-default-title-system-sensor-m02-09-00-test-magnet-31897178702048.jpg?v=1793439440"},{"product_id":"solo-423-heat-detector-tester","title":"Solo 423 Mains Powered Heat Detector Tester, 110-120V, 16 ft Cable","description":"\u003cp\u003e\u003cstrong\u003eSolo 423\u003c\/strong\u003e — mains-powered heat detector test head from the Detectortesters Solo range, for 110\/120 V supplies, order code SOLO423-001.\u003c\/p\u003e\u003cp\u003eHeat detectors must be tested where they sit. The 423 delivers controlled heat into a cup held over the detector until it responds, and the head fits a Solo telescopic access pole so ceiling devices are reached from the floor.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuits fixed temperature, rate-of-rise and combination heat detectors up to 194°F \/ 90°C\u003c\/li\u003e\n\u003cli\u003e110\/120 V member of the range; the 220\/240 V version is the Solo 424\u003c\/li\u003e\n\u003cli\u003eSupplied with a 5 m \/ 16 ft cable and mains connection; a second cable is available\u003c\/li\u003e\n\u003cli\u003eFitted with a thermal cut-out protection system; no user-serviceable parts inside\u003c\/li\u003e\n\u003cli\u003eUsed at height, at angles and at low level once fitted to a Solo access pole\u003c\/li\u003e\n\u003cli\u003eA detector not activating within one minute may be faulty, per Detectortesters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe Solo 424 is the same head for 220\/240 V; the Solo 461 is cordless, running from a Solo 760 Battery Baton. The A3 and C3 aerosols test smoke and carbon monoxide detectors, not heat. Poles such as the Solo 100, 101 and 108 are separate components.\u003c\/p\u003e","brand":"Solo","offers":[{"title":"Default Title","offer_id":43133110223072,"sku":"SOLO423-024","price":1223.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/solo-testers-default-title-solo-423-heat-detector-tester-38080602734816.jpg?v=1793783091"},{"product_id":"testifire-ts3-ts3-3pack-024-3-x-smoke-capsules","title":"Testifire TS3 (TS3-3PACK-024) 3 x Smoke Capsules","description":"\u003cp\u003e\u003cstrong\u003eTestifire TS3\u003c\/strong\u003e (TS3-3PACK) — replacement smoke capsules for Testifire detector testers, pack of 3.\u003c\/p\u003e\u003cp\u003eThe TS3 capsule is the smoke consumable for the Testifire multi-purpose detector test range. It generates smoke on demand at the detector head, so a technician can functionally test a smoke detector in place from the floor, without aerosol cans and without the residue that canned smoke leaves inside the sensing chamber.\u003c\/p\u003e\u003cp\u003eThe capsules are detector-manufacturer approved and are non-flammable, non-pressurised and non-hazardous, which matters for how they are shipped, stored and carried on a service vehicle.\u003c\/p\u003e\u003cp\u003eYield varies with the response time of the detectors under test, typically in the range of 500 to 1,000 tests per capsule — a full inspection cycle for most sites.\u003c\/p\u003e\u003cp\u003eFor use with the Testifire 1000-001 smoke\/heat head unit and the 2000-001 smoke\/heat\/CO head unit. Supplied as a pack of 3.\u003c\/p\u003e","brand":"Detector Testers","offers":[{"title":"Default Title","offer_id":43133111632096,"sku":"TS3","price":261.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/detectortesters-fire-alarms-default-title-testifire-ts3-ts3-3pack-024-3-x-smoke-capsules-34190524055776.jpg?v=1763279956"},{"product_id":"solo-c6-co-test-aerosol-hand-held-use","title":"Solo SOLOC6-024 Solo C6 Carbon Monoxide Detector Test Aerosol, Non-Flammable CO Test Gas","description":"\u003ch2\u003eSOLOC6 Solo C6 Gas Detector Tester\u003c\/h2\u003e\n\u003cp\u003eProduct Code: SOLOC6-001\u003c\/p\u003e\n\u003cp\u003eThe need to test carbon monoxide life safety alarms has increased in recent years with the introduction of new regulations and greater awareness around the risks of CO.\u003c\/p\u003e\n\u003cp\u003eThe Solo C6 aerosol has been developed for testing these devices - designed for hand-held use, the aerosol comes with a straw that allows for functional testing to take place.\u003c\/p\u003e\n\u003cp\u003eCO Test Aerosol (Non-Flammable) - For use with straw (provided) to directly test CO alarms.\u003c\/p\u003e\n\u003cp\u003eSupplied in boxes of 12\u003c\/p\u003e\n\u003cp\u003eApproved worldwide, our Solo aerosols deliver particles to the detector under test replicating conditions of a fire.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDetector manufacturer approved\u003c\/li\u003e\n\u003cli\u003eDesigned for use by hand\u003c\/li\u003e\n\u003cli\u003eGenuine, non-flammable CO gas\u003c\/li\u003e\n\u003cli\u003eFast test and reset times\u003c\/li\u003e\n\u003cli\u003eUL Certified\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Solo","offers":[{"title":"Default Title","offer_id":43133112320224,"sku":"SOLOC6-024","price":321.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/solo-testers-default-title-solo-c6-co-test-aerosol-hand-held-use-38106025689312.jpg?v=1793786886"},{"product_id":"sdi-blowout-handheld-duster-single-can","title":"SDi BLOWOUT 10 oz. Detector Duster, Single Can","description":"\u003cp\u003e\u003cstrong\u003eSDi BLOWOUT\u003c\/strong\u003e — 10 oz. hand-held air duster, single can, catalogued by SDi as a detector duster.\u003c\/p\u003e\u003cp\u003eSDi lists BLOWOUT in its own product guide under Detector Duster: a large 10 oz can, described as perfect for use with fire alarm test equipment, with no CFCs and a silicone-free formulation, so nothing is left on a smoke chamber or a board. It is worth being plain about the contents. The safety data sheet for Blow Out Duster 152A 10 oz gives them as 100% 1,1-difluoroethane, HFC-152a, CAS 75-37-6, the same propellant as office canned air, and classifies it as an extremely flammable aerosol (H222) holding gas under pressure (H280).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSDi product number 152-BLOWOUT-024; SDi, LLC, Neptune, NJ\u003c\/li\u003e\n\u003cli\u003eComposition: 1,1-difluoroethane, 100%\u003c\/li\u003e\n\u003cli\u003eDo not expose to temperatures above 120 °F (49 °C); keep away from heat, sparks and open flame\u003c\/li\u003e\n\u003cli\u003eLabelled as a consumer product under US CPSC rules\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIf site rules bar flammable aerosols, SDi catalogues SOLOA7 on the same page as a non-flammable detector duster. Treat this as a cleaning consumable rather than certified fire equipment: SDi publishes no pressure or blast duration figures for it, so none are quoted here.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is BlowOut used for?\u003c\/strong\u003e\u003cbr\u003eSDi describes BlowOut as a hand-held air duster that is perfect for use with fire alarm equipment, for detector removal and cleaning work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it reach tight spots?\u003c\/strong\u003e\u003cbr\u003eYes. BlowOut comes with a directional straw for access to hard to reach areas.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it packed?\u003c\/strong\u003e\u003cbr\u003eThis product is a single 10 oz can; SDi also sells BlowOut 10 oz cans in cases of 12.\u003c\/p\u003e","brand":"SDI","offers":[{"title":"Default Title","offer_id":43133112746208,"sku":"BLOWOUT","price":18.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/sdi-fire-alarms-default-title-sdi-blowout-handheld-duster-single-can-34133540896992.jpg?v=1793783191"},{"product_id":"edwards-siga-hdt-handheld-diagnostic-tool","title":"Edwards SIGA-HDT Handheld Diagnostic Tool","description":"\u003cp\u003e\u003cstrong\u003eEdwards SIGA-HDT\u003c\/strong\u003e — the Signature Series handheld diagnostic tool: a compact touch-screen unit that manipulates, tests and monitors an Edwards Signature signalling line circuit and its connected devices using live data in the field.\u003c\/p\u003e\n\u003cp\u003eThe SIGA-HDT can initialize a Signature loop before it is ever connected to a control panel, or diagnose and troubleshoot after the loop is landed on the controller — which makes it as useful for verifying a new project as for chasing a fault in an existing one. Terminal blocks on top of the unit take field wiring directly, and USB 2.0 and Micro-B ports handle data exchange and power. Collected data downloads to a laptop or desktop over USB cable, or can be written to a USB flash drive for use off-site, and the included PC software turns it into detailed reports for archiving or further analysis.\u003c\/p\u003e\n\u003cp\u003ePowered by a rechargeable lithium-ion battery.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHand-held unit with bright touch-screen graphical user interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower source\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRechargeable lithium-ion battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eField wiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10-position and 4-position terminal blocks (4-position required for Class A only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eData interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 and Micro-B ports for data exchange and power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoop functions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInitialize loop, restore loop, map analysis (map consistency and contact analysis), dirty level analysis, loop history\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDevice functions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eProgram new device address, program maintenance date, normalize photo (clean air count), read EEPROM, photo A\/D value, trouble codes, reinitialize all loop addresses to zero, single device history\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStatus readout\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSettings screen shows date and time, interface and GUI board versions, battery status, loop output voltage and current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSoftware v1.8 additions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSelectable LED inhibit for Signature Optica detectors; increased diagnostics for locating wiring and mapping faults on SLC loops\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrdering\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSIGA-HDT (tool); HDT-BATT (replacement battery)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eNote: the Edwards data sheet for this tool does not include a numeric specification table (no voltage, current, temperature or dimensional ratings are published on it), so none are stated here.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe LED inhibit feature has a firmware prerequisite:\u003c\/strong\u003e using v1.8 software to turn off the normal green polling LED on Signature Optica detectors requires detectors with firmware 1.0.16 or later. Older detectors on the same loop will not take the setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirty level analysis overwrites, it does not append:\u003c\/strong\u003e on successful execution the SIGA-HDT erases the old database of dirty levels and replaces it with new data. Export or record a previous run before starting a new one if you need the history.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo different map tests, two different purposes:\u003c\/strong\u003e map consistency maps each device three times and compares all three responses, flagging any device that does not answer consistently. Contact analysis measures what listening devices hear when an annunciating device is activated, an indirect measure of contact resistance that surfaces devices likely to cause a future map fault. Run both when chasing an intermittent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormalize after cleaning, not before:\u003c\/strong\u003e the normalize photo function writes a new clean air count into detector memory, so it must be run after the detector has been cleaned with the approved tools or method and reconnected to the loop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirty level applies to optical detectors only.\u003c\/strong\u003e The function is not associated with other device types.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime sync requires the PC:\u003c\/strong\u003e the SIGA-HDT must be connected to the computer software to sync its date and time. Reports carry those timestamps, so sync before a verification run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop history starts empty:\u003c\/strong\u003e the stored database screen displays nothing until an initialize or map analysis has actually been performed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReference documents:\u003c\/strong\u003e SIGA-HDT Operations user guide P\/N 3102424-EN, Installation sheet P\/N 3102422-EN, Diagnostics application guide P\/N 3102692-EN, and technical note FN00022 on inhibiting the green LED on Optica detectors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUSB flash drive containing the PC software and user guide\u003c\/li\u003e\n\u003cli\u003eUSB charging cable (USB 2.0 A-male to Micro-B) and AC USB charging adapter\u003c\/li\u003e\n\u003cli\u003e10-position and 4-position terminal connector blocks\u003c\/li\u003e\n\u003cli\u003eLithium-ion battery\u003c\/li\u003e\n\u003cli\u003eSIGA-HDT installation sheet (P\/N 3102422-EN) and operations user guide (P\/N 3102424-EN)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDT-BATT\u003c\/strong\u003e — replacement lithium-ion battery for the SIGA-HDT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSIGA-PRO\u003c\/strong\u003e — the Signature Program\/Service Tool referenced across the Signature module data sheets as an alternative means of addressing devices.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from the Edwards data sheet “Signature Series Diagnostic Tool — SIGA-HDT,” document E85001-0655, Issue 1.2. Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan the SIGA-HDT be used before the loop is connected to a panel?\u003c\/strong\u003e\u003cbr\u003eYes. It can initialize a Signature loop before it is connected to a control panel, or diagnose and troubleshoot after the loop is connected to the controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included with the tool?\u003c\/strong\u003e\u003cbr\u003eIt comes with a USB flash drive with the PC software and user guide, a USB 2.0 A to Micro-B charging cable, an AC USB charging adapter, 10-position and 4-position terminal blocks, the installation sheet, the operations user guide and a lithium-ion battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it turn off the green polling LED on Optica detectors?\u003c\/strong\u003e\u003cbr\u003eYes, version 1.8 software adds a selectable LED inhibit for Signature Optica detectors. It requires detectors with firmware 1.0.16 or later.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a replacement battery available?\u003c\/strong\u003e\u003cbr\u003eYes, the HDT-BATT is the replacement battery for the SIGA-HDT.\u003c\/p\u003e","brand":"Edwards","offers":[{"title":"Default Title","offer_id":43766699458784,"sku":"SIGA-HDT","price":939.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/siga-hdt-1-w.jpg?v=1794784886"},{"product_id":"sdi-m8-smoke-centurion-aerosol-smoke-detector-tester-2-6oz-case-of-12-cans","title":"SDI M8 Smoke Centurion Aerosol Smoke Detector Tester, Silicone Free, UL Certified, Case of 12 Cans","description":"\u003cp\u003e\u003cstrong\u003eSDi M8 Smoke Centurion\u003c\/strong\u003e — aerosol smoke for the functional testing of smoke detectors, sold in cases of 12 cans.\u003c\/p\u003e\u003cp\u003eFunctional testing proves that a detector responds to smoke and signals the panel, which a magnet or a self test button cannot do. It is applied by hand or through a Solo dispenser on an access pole, so ceiling detectors are reached from floor level. It is silicone free, because silicone residue builds up in a sensing chamber and degrades it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUL Certified as Fire Alarm Equipment, category 77TL, Aerosol Smoke Detector Tester\u003c\/li\u003e\n\u003cli\u003eULC Certified as Automatic Fire Detector Accessory, category 77TL\u003c\/li\u003e\n\u003cli\u003eSilicone free; no CFCs and a low GWP propellant\u003c\/li\u003e\n\u003cli\u003eBy hand, or with the Solo 330 dispenser for detectors to 4 in. across and the Solo 332 to 7 in.\u003c\/li\u003e\n\u003cli\u003eExtremely flammable aerosol; GHS signal word Danger, hazard statement H222\u003c\/li\u003e\n\u003cli\u003eMade by Detectortesters, No Climb Products Ltd; supplied by SDi LLC\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDo not confuse it with Solo A10 (SOLOA10) and Solo C6 (SOLOC6): both are non flammable where this one is not, and the C6 tests carbon monoxide rather than smoke.\u003c\/p\u003e","brand":"Smoke Centurion","offers":[{"title":"Default Title","offer_id":45960762622176,"sku":"M8","price":138.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/smoke-centurion-testers-default-title-sdi-m8-smoke-centurion-aerosol-smoke-detector-tester-2-6oz-case-of-12-cans-38190360133856.webp?v=1793777729"},{"product_id":"macurco-cal-kit-co-no2-h2s-calibration-kit-gas-is-sold-separately","title":"Macurco Cal-Kit CO, NO2, H2S Calibration Kit (Gas is Sold Separately)","description":"\u003ch2\u003eMacurco Cal-Kit CO, NO2, H2S Calibration Kit\u003c\/h2\u003e\n\u003cp\u003eReplacing CX-FCK, ND1-FCK, ND-FCK, and HS-FCK.\u003c\/p\u003e\n\u003cp\u003eUsed with CX-6, CX-12, CM-6, CM-12, TX-ND-6, TX-ND-12, TX-6-HS, and TX-12-HS.\u003c\/p\u003e\n\u003cp\u003eMust order gas separately: Cal-Kit 2 comes with a calibration case, Tygon Tubing (2’), Cal Hood Pack, and a 0.2LPM Regulator (M).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGases Are Sold Separately: CO-200PPM-AL, NO2-5PPM-AL or H2S Gas 25PPM\u003c\/strong\u003e\u003c\/p\u003e","brand":"Macurco","offers":[{"title":"Default Title","offer_id":46325008662752,"sku":"CAL-KIT 2","price":422.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/3038254.png?v=1793785229"},{"product_id":"simplex-553-810","title":"Simplex 553-810 Magnet Tester","description":"\u003cp\u003e\u003cstrong\u003eSimplex 553-810\u003c\/strong\u003e is the magnet tester that Simplex names in its 4098 Detectors, Sensors and Bases Application Manual for magnet testing of 4098 sensor bases and photoelectric detectors. It attaches to a Mr. Longarm pole, 4 ft (item 7508) or 6 ft (item 7512). Simplex treats the magnet test as a functional check during installation; smoke testing is still needed to meet NFPA requirements.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e553-810\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMagnet tester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePole attachment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMr. Longarm 4 ft (item 7508) or 6 ft (item 7512)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor bases named\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4098-9775, 4098-9776, 4098-9777, 4098-9780, 4098-9789, 4098-9791, 4098-9792, 4098-9793\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhotoelectric detectors named\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4098-9601, 4098-9602, 4098-9605\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eCompatibility and installation notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSensor bases: hold the tester 1\/2 to 3\/4 in. (12 to 20 mm) counterclockwise from the visible LED on the base. On MAPNET II devices a magnet test reports 255 for the current\/peak value; clear peak values after testing.\u003c\/li\u003e\n\u003cli\u003ePhotoelectric detectors: hold it over the \"|\" mark on the cover for 4 seconds. A detector within calibration latches into alarm with the LED on; more sensitive gives six rapid flashes then latches; less sensitive gives four slow flashes then latches; a non-functional detector gives four slow flashes and does not latch.\u003c\/li\u003e\n\u003cli\u003eClean a detector that tests out of range, and replace it if it still reads abnormal after cleaning.\u003c\/li\u003e\n\u003cli\u003eReset the fire alarm panel after testing to restore normal status.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/docs.johnsoncontrols.com\/simplex\/api\/khub\/documents\/oNF7qNoqFqr50SxkmjuO~A\/content\"\u003eSimplex 4098 Detectors, Sensors and Bases Application Manual 574-709 (Portuguese edition, PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eSpecifications from Simplex 4098 Detectors, Sensors and Bases Application Manual 574-709 Rev. AP (Portuguese edition), sections 6.3.4 to 6.3.6. Manufacturer specifications are subject to change.\u003c\/em\u003e\u003c\/p\u003e","brand":"Simplex","offers":[{"title":"Default Title","offer_id":46427384447200,"sku":"553-810","price":274.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/TheFireAlarmSupplier_3929b5b0-3a3c-4783-ac95-935d617410cc.webp?v=1793785088"},{"product_id":"det-tronics-102740-002-calibration-magnet","title":"Det-Tronics 102740-002 Calibration Magnet","description":"\u003cp\u003e\u003cstrong\u003eDet-Tronics 102740-002\u003c\/strong\u003e — calibration magnet, the handheld tool that actuates the internal reed switch on Det-Tronics flame and gas detectors.\u003c\/p\u003e\u003cp\u003eThe reed switch lets calibration, alarm reset and optical integrity testing be done without opening the housing. On the PointWatch Eclipse CO\u003csub\u003e2\u003c\/sub\u003e detector a momentary touch resets latched alarms and holding the magnet two seconds or more starts calibration; on the X3301 flame detector it is held at the point marked MAG oi for six seconds, firing the calibrated IR emitters.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNamed Calibration Magnet in the spare parts blocks of 95-8676 and 95-8556 (OPECL)\u003c\/li\u003e\n\u003cli\u003eListed as accessory Magnet for the X3301 flame detector in 95-8704\u003c\/li\u003e\n\u003cli\u003eFM, CSA, EN 54-10 and offshore approved as an X3301 accessory\u003c\/li\u003e\n\u003cli\u003eNon-intrusive one-person calibration: no tools, no cover removal\u003c\/li\u003e\n\u003cli\u003eExtinguishing devices must be disabled first, because a successful oi test actuates the alarm output\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis number is the bare magnet: 007739-001 is the magnet with an extension pole and 008082-001 the magnet with a pole adapter. It is a test tool and not calibration gas, which carries its own numbers.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":46826329276640,"sku":"102740-002","price":116.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-102740-002-calibration-magnet-36618139959520.jpg?v=1793777747"},{"product_id":"macurco-cm-e1-ftg-carbon-monoxide-co-aerosol-field-test-gas","title":"Macurco CM-E1-FTG Carbon Monoxide CO Aerosol Field Test Gas","description":"\u003ch2\u003eMacurco CM-E1-FTG Carbon Monoxide CO Aerosol Field Test Gas, 11L 500 PPM, Bump Test CM-E1, CM-6 and CM-12 Gas Detectors\u003c\/h2\u003e\u003cdiv class=\"ths-mfr-data\"\u003e\n\u003cp\u003eThe CM-E1-FTG is an 11-liter aerosol can of 500 ppm carbon monoxide in air, used to bump test Macurco CO detectors: the CM-E1, CM-6\/CM-12 and the CO sensor of the CX-6\/CX-12. It lets an installer do a quick functional check of the CO sensor; it is not a calibration gas. At a flow of 10 L\/min one can gives about a minute of gas, enough to test roughly 20 to 30 sensors.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e11 L aerosol, 500 ppm CO in air\u003c\/li\u003e\n\u003cli\u003eFor bump (functional) testing only\u003c\/li\u003e\n\u003cli\u003eFlow rate 10 L\/min - about 20-30 sensor tests per can\u003c\/li\u003e\n\u003cli\u003eUsed with Macurco CM-E1, CM-6\/12 and CX-6\/12 (CO only)\u003c\/li\u003e\n\u003cli\u003eAlso sold as a 12-pack (CM-E1-FTG\/12)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"ths-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGas\u003c\/th\u003e\n\u003ctd\u003e500 ppm carbon monoxide in air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVolume\u003c\/th\u003e\n\u003ctd\u003e11 L aerosol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFlow rate\u003c\/th\u003e\n\u003ctd\u003e10 L\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSize\u003c\/th\u003e\n\u003ctd\u003e12 x 3 x 3 in. (30.5 x 7.6 x 7.6 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1 lb (0.45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMacurco CM-E1\u003c\/li\u003e\n\u003cli\u003eMacurco CM-6 \/ CM-12\u003c\/li\u003e\n\u003cli\u003eMacurco CX-6 \/ CX-12 (CO sensor)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003e\n\u003ca href=\"https:\/\/macurco.com\/wp-content\/uploads\/2018\/05\/macurco_cme1-ftg_manual_5-07-2014.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCME1-FTG Aerosol CO Field Test Gas User Instructions\u003c\/a\u003e (User Manual)\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Macurco","offers":[{"title":"Default Title","offer_id":46826364862688,"sku":"CM-E1-FTG","price":85.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/macurco-fire-alarms-default-title-macurco-cm-e1-ftg-carbon-monoxide-co-aerosol-field-test-gas-36282385760480.jpg?v=1793778039"},{"product_id":"smoke-sabre-sabre","title":"Detector Testers SABRE SMOKESABRE - Smoke Detector Tester Aerosol 2.6oz (12 Pack)","description":"\u003cp\u003e2.6oz Handheld Aerosol Smoke Detector Tester (12 Pack)\u003c\/p\u003e\u003cdiv class=\"ths-mfr-data\"\u003e\n\u003cp\u003eSmokeSabre is a hand-held aerosol smoke detector tester for functional testing of smoke detectors. Its built-in 'Sabre' keeps the can a set distance from the detector, and smoke is only released when the Sabre is fully extended, which prevents spraying too close and leaving residue that could damage the detector or cause nuisance alarms. The formulation is silicone-free, and the manufacturer positions it as a backup to a full test kit or as a solution for small jobs and infrequent testing.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHand-held aerosol smoke for functional testing of smoke detectors\u003c\/li\u003e\n\u003cli\u003eBuilt-in 'Sabre' prevents use too close to the detector; smoke cannot be dispensed with the Sabre closed\u003c\/li\u003e\n\u003cli\u003eSilicone-free; leaves no harmful residue\u003c\/li\u003e\n\u003cli\u003e100% biodegradable, ozone-friendly, no CFCs and low GWP (per SDi)\u003c\/li\u003e\n\u003cli\u003eEndorsed \/ approved by detector manufacturers\u003c\/li\u003e\n\u003cli\u003eSold in cases of 12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"ths-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCan size\u003c\/th\u003e\n\u003ctd\u003e2.6 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCase quantity\u003c\/th\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSDi part number\u003c\/th\u003e\n\u003ctd\u003eSABRE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eHand-held (not for dispenser use)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eSmoke detectors (manufacturer states compatibility with the widest range of smoke detectors)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/sdifire.com\/wp-content\/uploads\/2026\/05\/2024-SDi-Product-Guide-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSDi Product Guide 2024\u003c\/a\u003e (Catalog)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/detectortesters.com\/amfile\/file\/download\/file\/22\/product\/7\/\" target=\"_blank\" rel=\"noopener\"\u003eSmokeSabre Flyer (LIT1193)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the \"Sabre\" do?\u003c\/strong\u003e\u003cbr\u003eThe built-in Sabre prevents the can from being used too close to the detector, which SDi says could lead to damage and nuisance alarms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is SmokeSabre sold?\u003c\/strong\u003e\u003cbr\u003eSDi sells SmokeSabre in cases of 12, which is this pack.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhen is SmokeSabre the right choice?\u003c\/strong\u003e\u003cbr\u003eSDi positions it as a backup for a complete test and maintenance kit, or as a test solution for small jobs or infrequent testing.\u003c\/p\u003e","brand":"Detector Testers","offers":[{"title":"Default Title","offer_id":46826505961696,"sku":"SABRE","price":200.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/2S-SABRE_alt1.jpg?v=1793783192"},{"product_id":"det-tronics-226166-001-replacement-gas-cylinder","title":"Det-Tronics 226166-001 Replacement Gas Cylinder","description":"\u003cp\u003e\u003cstrong\u003eDet-Tronics 226166-001\u003c\/strong\u003e is a spare 103 liter calibration gas cylinder containing 50% LFL methane (2.5% by volume, NFPA LFL basis) in air. It is the replacement cylinder for the Det-Tronics combustible gas certified calibration kits used with CGS catalytic combustible gas sensors, and is listed as the spare cylinder for the 225130-001 methane calibration kit.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e226166-001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGas\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConcentration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50% LFL (2.5% by volume)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLFL standard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNFPA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBalance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCylinder volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e103 L (3.6 cu ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShip weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 lb (0.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility and installation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement cylinder for the Det-Tronics combustible gas certified calibration kits for CGS catalytic sensors (spec sheet 90-1059).\u003c\/li\u003e\n\u003cli\u003eListed as the spare cylinder in the 225130-001 methane gas calibration kit, 50% LFL methane.\u003c\/li\u003e\n\u003cli\u003eThe kits deliver gas through a regulator with a fixed flow of 1 liter per minute (162552-001), 3 ft tubing and a stainless steel CGS calibration cup (004976-001).\u003c\/li\u003e\n\u003cli\u003eMake sure the LFL basis matches your system: 226166-014 is the IEC methane cylinder at 2.2% by volume.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/det-tronics-226166-014\"\u003e226166-014\u003c\/a\u003e methane, 50% LFL, 2.2% vol, IEC\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/det-tronics-226166-901-gas-cylinder-for-combustible\"\u003e226166-901\u003c\/a\u003e methane, 50% LFL, 2.5% vol, NFPA (version certified for Russian projects)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/det-tronics-226166-004\"\u003e226166-004\u003c\/a\u003e propane, 50% LFL, 1.1% vol, NFPA\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/det-tronics-226166-005\"\u003e226166-005\u003c\/a\u003e hydrogen, 50% LFL, 2.0% vol, NFPA\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/det-tronics-226166-006-replacement-gas-cylinder\"\u003e226166-006\u003c\/a\u003e zero air, nitrogen balance\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/det-tronics-004976-001\"\u003e004976-001\u003c\/a\u003e standard calibration cup, stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.det-tronics.com\/wp-content\/uploads\/sites\/8\/2026\/03\/52-1002-26.0-2026-Product-Catalog.pdf\"\u003e2026 Det-Tronics Product Catalog\u003c\/a\u003e (Catalytic section, calibration kits)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications from the 2026 Det-Tronics Product Catalog 52-1002-26.0. Manufacturer specifications are subject to change.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat gas is in the 226166-001 cylinder?\u003c\/strong\u003e\u003cbr\u003eMethane at 50% LFL, 2.5% by volume on the NFPA LFL basis, balance air, in a 103 liter cylinder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich calibration kit does it refill?\u003c\/strong\u003e\u003cbr\u003eIt is the spare cylinder for the 225130-001 methane gas calibration kit (50% LFL methane) used with Det-Tronics CGS catalytic combustible gas sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there an IEC version?\u003c\/strong\u003e\u003cbr\u003eYes. The 226166-014 is methane at 50% LFL on the IEC basis, 2.2% by volume. Match the LFL basis to your system.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":46826617798880,"sku":"226166-001","price":731.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-226166-001-replacement-gas-cylinder-37776511500512.jpg?v=1763285822"},{"product_id":"det-tronics-226166-901-gas-cylinder-for-combustible","title":"Det-Tronics 226166-901 Gas Cylinder For Combustible","description":"\u003ch2\u003eGas Cylinder For Combustible\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 226166-901 (Gas Cylinder for Combustible) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a calibration gas or calibration accessory. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":46826617831648,"sku":"226166-901","price":490.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/226166-901_1.jpg?v=1793736040"},{"product_id":"det-tronics-225130-005-calibration-kit-for-cgs-catalytic-sensor","title":"Det-Tronics 225130-005 Calibration Kit For CGS Catalytic Sensor","description":"\u003cp\u003e\u003cstrong\u003eDet-Tronics 225130-005\u003c\/strong\u003e is a certified calibration kit with hydrogen calibration gas for Det-Tronics CGS catalytic combustible gas sensors. The gas is 50% LFL hydrogen (2.0% by volume, NFPA basis) in an air balance.\u003c\/p\u003e\u003cp\u003eThe kit comes in a sturdy plastic carrying case with two 103 liter (3.6 cu ft) cylinders of Class 2.2 non-flammable, non-toxic compressed gas, a regulator and shutoff valve with gauge, 3 ft of tubing and a stainless steel CGS calibration cup. The regulator gives a fixed flow of 1 liter per minute, set for CGS sensors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGas\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHydrogen, 50% LFL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConcentration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.0% by volume (NFPA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBalance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCylinders\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo, 103 L (3.6 cu ft) each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlow rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 L\/min fixed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShip weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.5 lb (5.23 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRegulator and shutoff valve with gauge\u003c\/li\u003e\n\u003cli\u003e3 ft tube and stainless steel CGS calibration cup\u003c\/li\u003e\n\u003cli\u003ePlastic carrying case\u003c\/li\u003e\n\u003cli\u003eSpare 50% LFL hydrogen cylinder available as 226166-005\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e225130-001: same kit with 50% LFL methane\u003c\/li\u003e\n\u003cli\u003e225130-009: empty kit with no calibration gas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-52-1002-26.0-2026-Product-Catalog.pdf?v=1794292080\" target=\"_blank\" rel=\"noopener\"\u003eDet-Tronics 2026 Product Catalog, CGS Calibration Kits (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-95-8472-4.2-505-CGS.pdf?v=1794321524\" target=\"_blank\" rel=\"noopener\"\u003eModel 505 Transmitter with CGS Sensor Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich sensors is this kit for?\u003c\/strong\u003e\u003cbr\u003eDet-Tronics CGS catalytic combustible gas sensors. The regulator is set to a fixed 1 liter per minute flow designed for CGS sensors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gas is in the kit?\u003c\/strong\u003e\u003cbr\u003eHydrogen at 50% LFL, which Det-Tronics lists as 2.0% by volume on the NFPA basis, balanced in air.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I get more gas?\u003c\/strong\u003e\u003cbr\u003eThe 226166-005 is the spare 50% LFL hydrogen cylinder for this kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a methane version?\u003c\/strong\u003e\u003cbr\u003eYes. The 225130-001 kit uses 50% LFL methane, which Det-Tronics uses for FM and CSA verified calibration of the Model 505 CGS.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":46826746675424,"sku":"225130-005","price":2259.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-225130-005-calibration-kit-for-cgs-catalytic-sensor-36033088192736.webp?v=1793785921"},{"product_id":"det-tronics-006618-001-remote-calibration-cups","title":"Det-Tronics 006618-001 Remote Calibration Cups","description":"\u003cp\u003e\u003cstrong\u003eDet-Tronics 006618-001\u003c\/strong\u003e is the outdoor stainless steel screen remote calibration cup with a barbed fitting for CGS gas sensors. It lets a technician calibrate a CGS sensor from a remote location by running calibration gas through tubing to the cup instead of reaching the sensor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e006618-001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRemote calibration cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVersion\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOutdoor, stainless steel screen, barbed fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDet-Tronics CGS gas sensors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompression-fitting version\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e006618-002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eApplication notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAllows calibration of a CGS sensor from a remote location\u003c\/li\u003e\n\u003cli\u003eSuits sensors mounted where access is hard\u003c\/li\u003e\n\u003cli\u003eBarbed fitting takes push-on tubing\u003c\/li\u003e\n\u003cli\u003eUse the matching compression version (006618-002) if a compression fitting is required\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is one of several CGS sensor accessories that also include rain shields, splash guards, dust covers, sample draw cups and duct mount assemblies.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47486366056672,"sku":"006618-001","price":475.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/006618-001_1.jpg?v=1793785677"},{"product_id":"apc-tg-1000-standard-test-gas","title":"APC TG-1000 Standard Test Gas","description":"\u003ch2\u003eAir Products and Controls TG-1000 Standard Test Gas\u003c\/h2\u003e\n\u003cp\u003eAerosol smoke tester for use with Air Products and Controls and Apollo detectors\u003c\/p\u003e\u003cdiv class=\"ths-mfr-data\"\u003e\n\u003cp\u003eAerosol smoke detector tester for functional testing of Air Products and Controls and Apollo smoke detectors. It is an oil-free, non-flammable formulation in a 4.8 oz can.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOil-free formulation\u003c\/li\u003e\n\u003cli\u003eNo lasting residue\u003c\/li\u003e\n\u003cli\u003eFaster testing and clearing times\u003c\/li\u003e\n\u003cli\u003eNon-flammable\u003c\/li\u003e\n\u003cli\u003eApproved for all Air Products and Controls and Apollo smoke detectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"ths-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCan size\u003c\/th\u003e\n\u003ctd\u003e4.8 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStandard\u003c\/th\u003e\n\u003ctd\u003eUL 268\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCan height\u003c\/th\u003e\n\u003ctd\u003e152.4 mm (6\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCan diameter\u003c\/th\u003e\n\u003ctd\u003e69.85 mm (2.75\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAir Products and Controls smoke detectors\u003c\/li\u003e\n\u003cli\u003eApollo smoke detectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Air Products and Controls","offers":[{"title":"Default Title","offer_id":47635572162784,"sku":"TG-1000","price":81.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/air-products-and-controls-fire-alarms-default-title-apc-tg-1000-standard-test-gas-38253847019744.jpg?v=1793785419"},{"product_id":"apc-tg-701-co-aerosol-test-gas","title":"APC TG-701 CO Aerosol Test Gas","description":"\u003cp\u003e\u003cstrong\u003eAir Products and Controls TG-701\u003c\/strong\u003e is a non-flammable carbon monoxide (CO) aerosol test gas. It puts real CO at the sensing cell of a CO detector, so technicians can confirm that the detector responds during functional testing. It is approved for use with Air Products and Controls and Apollo CO detectors.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGas\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarbon monoxide (CO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAerosol can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL 2075A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCan height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e152.4 mm (6.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCan diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e69.85 mm (2.75 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApproved for\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAir Products and Controls and Apollo CO detectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine, non-flammable CO gas\u003c\/li\u003e\n\u003cli\u003eFast test and reset time\u003c\/li\u003e\n\u003cli\u003eControllable and safe to use\u003c\/li\u003e\n\u003cli\u003eGas is delivered directly to the detector sensing cell\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eService technicians use it for periodic functional tests of CO detectors during commissioning and maintenance.\u003c\/p\u003e","brand":"Air Products and Controls","offers":[{"title":"Default Title","offer_id":47635572293856,"sku":"TG-701","price":80.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/air-products-and-controls-fire-alarms-default-title-apc-tg-701-co-aerosol-test-gas-38253927399648.jpg?v=1793785419"},{"product_id":"apc-tg-1500-centurion-smoke-test-gas-for-sm-hs-series-duct-detectors","title":"APC TG-1500 Centurion Smoke Test Gas for SM \/ HS Series Duct Detectors","description":"\u003ch2\u003eAir Products and Controls TG-1500 Centurion Smoke Test Gas for SM \/ HS Series Duct Detectors (all open area detectors )\u003c\/h2\u003e\u003cdiv class=\"ths-mfr-data\"\u003e\n\u003cp\u003eCenturion aerosol smoke test gas for functional testing of Air Products and Controls SM and HS Series duct detectors and open area smoke detectors. It is a silicone-free formulation in a 2.6 oz can.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSilicone-free, reduces risk of detector contamination\u003c\/li\u003e\n\u003cli\u003eFast detector activation\u003c\/li\u003e\n\u003cli\u003eMore tests per can\u003c\/li\u003e\n\u003cli\u003eOzone friendly (no CFCs), low GWP propellant\u003c\/li\u003e\n\u003cli\u003eApproved to work with Air Products and Controls detectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable class=\"ths-spec-table\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCan size\u003c\/th\u003e\n\u003ctd\u003e2.6 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStandard\u003c\/th\u003e\n\u003ctd\u003eUL 268\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCan height\u003c\/th\u003e\n\u003ctd\u003e133.35 mm (5.25\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCan diameter\u003c\/th\u003e\n\u003ctd\u003e50.8 mm (2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAPC SM Series duct smoke detectors\u003c\/li\u003e\n\u003cli\u003eAPC HS Series duct smoke detectors\u003c\/li\u003e\n\u003cli\u003eOpen area smoke detectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Air Products and Controls","offers":[{"title":"Default Title","offer_id":47635572359392,"sku":"TG-1500","price":30.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/air-products-and-controls-fire-alarms-default-title-apc-tg-1500-centurion-smoke-test-gas-for-sm-hs-series-duct-detectors-38208895975648.jpg?v=1793784816"},{"product_id":"apollo-29600-100","title":"Apollo 29600-100 Solo 330 Aerosol Dispenser","description":"\u003cp\u003eApollo 29600-100 Solo 330 Aerosol Dispenser\u003c\/p\u003e","brand":"Apollo","offers":[{"title":"Default Title","offer_id":47648009224416,"sku":"29600-100","price":699.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/apollo-fire-alarms-default-title-apollo-29600-100-38254377173216.webp?v=1793787523"},{"product_id":"apollo-29600-102","title":"Apollo 29600-102 Solo 200 Detector Removal Tool","description":"\u003cp\u003eApollo 29600-102 Solo 200 Detector Removal Tool\u003c\/p\u003e","brand":"Apollo","offers":[{"title":"Default Title","offer_id":47648009453792,"sku":"29600-102","price":817.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/apollo-fire-alarms-default-title-apollo-29600-102-38254377205984.webp?v=1793787523"},{"product_id":"apollo-29600-103","title":"Apollo 29600-103 Solo 101 Extension Pole 1.13m","description":"\u003cp\u003eApollo 29600-103 Solo 101 Extension Pole 1.13m\u003c\/p\u003e","brand":"Apollo","offers":[{"title":"Default Title","offer_id":47648009486560,"sku":"29600-103","price":263.55,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/apollo-fire-alarms-default-title-apollo-29600-103-38254377238752.webp?v=1793787523"},{"product_id":"apollo-29600-104","title":"Apollo 29600-104 Solo 100 Telescopic Pole 1.26m to 4.50m","description":"\u003cp\u003eApollo 29600-104 Solo 100 Telescopic Pole 1.26m to 4.50m\u003c\/p\u003e","brand":"Apollo","offers":[{"title":"Default Title","offer_id":47648009519328,"sku":"29600-104","price":1291.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/apollo-fire-alarms-default-title-apollo-29600-104-38254377271520.webp?v=1793787523"},{"product_id":"apollo-29600-212","title":"Apollo 29600-212 Solo 461 Cordless Heat Detector Tester","description":"\u003cp\u003eApollo 29600-212 Solo 461  Cordless Heat Detector Tester\u003c\/p\u003e","brand":"Apollo","offers":[{"title":"Default Title","offer_id":47648009650400,"sku":"29600-212","price":2629.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/E0002173_0001.jpg?v=1793787524"},{"product_id":"apollo-29600-365","title":"Apollo 29600-365 Solo 365 Smoke Detector Test Kit incl. adapter","description":"\u003cp\u003eApollo 29600-365 Solo 365  Smoke Detector Test Kit incl. adapter\u003c\/p\u003e","brand":"Apollo","offers":[{"title":"Default Title","offer_id":47648010797280,"sku":"29600-365","price":2835.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/apollo-fire-alarms-default-title-apollo-29600-365-38254383038688.webp?v=1793787536"},{"product_id":"apollo-29600-460","title":"Apollo 29600-460 Testifire 1001 SmokeHeat Test Kit","description":"\u003cp\u003eApollo 29600-460 Testifire 1001 SmokeHeat Test Kit\u003c\/p\u003e","brand":"Apollo","offers":[{"title":"Default Title","offer_id":47648011059424,"sku":"29600-460","price":4245.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/apollo-fire-alarms-default-title-apollo-29600-460-38254383792352.webp?v=1793787536"},{"product_id":"apollo-sa7800-870apo","title":"Apollo SA7800-870APO Intelligent Test Set","description":"\u003ch2\u003eApollo SA7800-870APO Intelligent Test Set\u003c\/h2\u003e","brand":"Apollo","offers":[{"title":"Default Title","offer_id":47648037830880,"sku":"SA7800-870APO","price":1340.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/apollo-default-title-apollo-sa7800-870apo-intelligent-test-set-sa7800-870apo-63951633056117.webp?v=1793787738"},{"product_id":"det-tronics-000515-092","title":"Det-Tronics 000515-092 Telescopic Pole, 1.26 m to 4.5 m","description":"\u003ch2\u003eTELESCOPIC POLE, 1.26M TO 4.5M\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 000515-092 (Telescopic POLE,1.26M TO 4.5M) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648072925408,"sku":"000515-092","price":1605.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-000515-092-38254614544608.webp?v=1793787785"},{"product_id":"det-tronics-000516-018","title":"Det-Tronics 000516-018 Test Gas CYLN., 70% Methane","description":"\u003ch2\u003eTEST GAS CYLN., 70% Methane\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 000516-018 (Test GAS CYLN.,70% Methane) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a calibration gas or calibration accessory. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648074825952,"sku":"000516-018","price":411.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-000516-018-38254644625632.webp?v=1793787809"},{"product_id":"det-tronics-004000-006","title":"Det-Tronics 004000-006 W867C3004 Test Lamp, 120 \/ 220 VAC","description":"\u003cp\u003e\u003cstrong\u003eDet-Tronics 004000-006\u003c\/strong\u003e is the W867C3004 explosion-proof UVIR test lamp, used for on-site testing of UV, single-frequency IR and UVIR flame detectors.\u003c\/p\u003e\u003cp\u003eThe W867 consists of a high-energy broadband lamp powered by rechargeable batteries, housed in an explosion-proof, non-ferrous metallic enclosure. This part number includes the Universal Battery Charger for 110\/220 VAC, so the lamp can be charged on either supply.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eW867C3004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e004000-006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExplosion-proof UVIR test lamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetectors tested\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUV, single-frequency IR and UVIR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLight source\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHigh-energy broadband lamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRechargeable batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eExplosion-proof, non-ferrous metallic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCharger\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal Battery Charger, 110\/220 VAC, included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApproval\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShip weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 lb (6.2 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eRelated models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e009997-002 â€” Universal Battery Charger for W867 and W8067, 110\/220 VAC\u003c\/li\u003e\n\u003cli\u003e004611-002 â€” W867 battery pack kit\u003c\/li\u003e\n\u003cli\u003e010543-001 â€” W867 bulb replacement assembly\u003c\/li\u003e\n\u003cli\u003e004483-002 â€” W8066G1001 UV test lamp, Kr85-free, for UV detectors\u003c\/li\u003e\n\u003cli\u003e006439-004 â€” W8067S1004 test lamp for UVIR and single-frequency IR detectors (not explosion-proof; cannot be used in hazardous locations)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-52-1002-26.0-2026-Product-Catalog.pdf?v=1794292080\" target=\"_blank\" rel=\"noopener\"\u003eDet-Tronics 2026 Product Catalog, W867 Test Lamp (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich flame detectors can the W867 test?\u003c\/strong\u003e\u003cbr\u003eUV, single-frequency IR and UVIR detectors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used in hazardous locations?\u003c\/strong\u003e\u003cbr\u003eYes. The W867 is housed in an explosion-proof, non-ferrous metallic enclosure. The W8067 test lamp is not explosion-proof and cannot be used in hazardous locations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a charger included?\u003c\/strong\u003e\u003cbr\u003eYes. Part number 004000-006 includes the Universal Battery Charger, 110\/220 VAC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spare parts are available?\u003c\/strong\u003e\u003cbr\u003eThe W867 battery pack kit (004611-002) and bulb replacement assembly (010543-001).\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648078266592,"sku":"004000-006","price":20922.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-004000-006-38254652129504.webp?v=1793786212"},{"product_id":"det-tronics-004000-903","title":"Det-Tronics 004000-903 W867C3001-R UV\/IR Flame Detector Test Lamp","description":"\u003cp\u003eThe Det-Tronics 004000-903 (W867C3001-R) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648078332128,"sku":"004000-903","price":13787.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-004000-903-38254652457184.webp?v=1793787820"},{"product_id":"det-tronics-004483-001","title":"Det-Tronics 004483-001 W8066A1001 Ultraviolet Test Lamp","description":"\u003ch2\u003eW8066A1001 Ultraviolet Test Lamp\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 004483-001 (W8066A1001 (004483-001) Ultraviolet Test Lamp) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648078594272,"sku":"004483-001","price":2813.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/W8066.jpg?v=1765965503"},{"product_id":"det-tronics-004483-002","title":"Det-Tronics 004483-002 W8066G1001 UV Test Lamp","description":"\u003ch2\u003eW8066G1001 UV TEST LAMP\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 004483-002 (W8066G1001 UV Test Lamp) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648078725344,"sku":"004483-002","price":4066.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/W8066_666a2436-1293-4e2c-896b-18bdbbf278c4.jpg?v=1765965531"},{"product_id":"det-tronics-004574-001","title":"Det-Tronics 004574-001 Strap, Carrying Test Lamp W867","description":"\u003ch2\u003eSTRAP, CARRYING TEST LAMP W867\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 004574-001 (Strap,carrying Test Lamp W867) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648081477856,"sku":"004574-001","price":202.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-004574-001-38254656028896.webp?v=1793787832"},{"product_id":"det-tronics-004976-001","title":"Det-Tronics 004976-001 CALIBRATION CUP, Stainless Steel, CGS","description":"\u003cp\u003e\u003cstrong\u003eDet-Tronics 004976-001\u003c\/strong\u003e is the standard stainless steel calibration cup for CGS catalytic combustible gas sensors. It is the cup supplied in the Det-Tronics combustible gas certified calibration kits, used together with the kit regulator and 3 ft tubing when calibrating a CGS sensor. Det-Tronics lists it as a replacement part for those kits.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e004976-001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard calibration cup, stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFor sensor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCGS catalytic combustible gas sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShip weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 oz (0.23 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility and installation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement part for the Det-Tronics combustible gas certified calibration kits for CGS sensors (spec sheet 90-1059).\u003c\/li\u003e\n\u003cli\u003eThe kits pair the cup with a regulator that gives a fixed flow of 1 liter per minute (162552-001) and 3 ft tubing (101678-007); tubing is not part of this item.\u003c\/li\u003e\n\u003cli\u003eFor calibration from a remote location, Det-Tronics offers separate CGS remote calibration cups with barbed or compression fittings.\u003c\/li\u003e\n\u003cli\u003eThis cup is listed for CGS sensors; the GT3000 toxic gas detector uses a different calibration cup (009737-001).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/det-tronics-226166-001-replacement-gas-cylinder\"\u003e226166-001\u003c\/a\u003e replacement cylinder, methane 50% LFL (2.5% vol)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/det-tronics-226166-014\"\u003e226166-014\u003c\/a\u003e replacement cylinder, methane 50% LFL (2.2% vol, IEC)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/det-tronics-226166-004\"\u003e226166-004\u003c\/a\u003e replacement cylinder, propane 50% LFL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.det-tronics.com\/wp-content\/uploads\/sites\/8\/2026\/03\/52-1002-26.0-2026-Product-Catalog.pdf\"\u003e2026 Det-Tronics Product Catalog\u003c\/a\u003e (Catalytic section, calibration kit replacement parts)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications from the 2026 Det-Tronics Product Catalog 52-1002-26.0. Manufacturer specifications are subject to change.\u003c\/em\u003e\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648081740000,"sku":"004976-001","price":284.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-004976-001-38254662254816.webp?v=1793785693"},{"product_id":"det-tronics-004996-001","title":"Det-Tronics 004996-001 Calibration CUP-REMOTE, Porex FLTR","description":"\u003ch2\u003eCalibration CUP-REMOTE, Porex FLTR\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 004996-001 (CAL Cup-remote, Porex Fltr) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a calibration gas or calibration accessory. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648081772768,"sku":"004996-001","price":425.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-004996-001-38254662484192.webp?v=1793787832"},{"product_id":"det-tronics-006439-004","title":"Det-Tronics 006439-004 W8067S1004 Test Lamp IR\/UVIR","description":"\u003ch2\u003eW8067S1004 TEST LAMP IR\/UVIR\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 006439-004 (W8067S1004 Test Lamp Ir\/uvir) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648088195296,"sku":"006439-004","price":2608.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-006439-004-38254689452256.webp?v=1793787857"},{"product_id":"det-tronics-006468-016","title":"Det-Tronics 006468-016 Kit, INFRARED Calibration, W\/O BOTTLE","description":"\u003ch2\u003eKit, INFRARED Calibration, W\/O BOTTLE\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 006468-016 (Kit,infrared Cal,with O Bottle) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a calibration gas or calibration accessory. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648090554592,"sku":"006468-016","price":993.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-006468-016-38254698070240.webp?v=1793787857"},{"product_id":"det-tronics-006618-002","title":"Det-Tronics 006618-002 Calibration CUP-REMOTE, SSTL SCREENS","description":"\u003ch2\u003eCalibration CUP-REMOTE, SSTL SCREENS\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 006618-002 (CAL Cup-remote, Sstl Screens) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a calibration gas or calibration accessory. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648091439328,"sku":"006618-002","price":644.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-006618-002-38254716944608.webp?v=1793787869"},{"product_id":"det-tronics-006682-001","title":"Det-Tronics PIR9400 (006682-001) Windshield, Calibration, PIR9400","description":"\u003ch2\u003eWINDSHIELD, CALIBRATION, PIR9400\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 006682-001 (WINDSHIELD,CALIBRATION,PIR9400) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a calibration gas or calibration accessory. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648093339872,"sku":"006682-001","price":155.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-006682-001-38254720680160.webp?v=1793787869"},{"product_id":"det-tronics-007351-001","title":"Det-Tronics 007351-001 PSS-ML DEC Test Lamp","description":"\u003ch2\u003ePSS-ML DEC TEST LAMP\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 007351-001 (Pss-ml DEC Test Lamp) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648104906976,"sku":"007351-001","price":415.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-007351-001-38254793457888.webp?v=1793787942"},{"product_id":"det-tronics-007739-001","title":"Det-Tronics 007739-001 Extension Pole, Magnet, 12 ft","description":"\u003cp\u003e\u003cstrong\u003eDet-Tronics 007739-001\u003c\/strong\u003e is a 12 ft magnet extension pole supplied as a Det-Tronics accessory for fire and gas detection equipment.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e12 ft extension pole\u003c\/li\u003e\n\u003cli\u003eMagnet fitted\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648110837984,"sku":"007739-001","price":770.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-007739-001-38254805778656.webp?v=1793787965"},{"product_id":"det-tronics-007739-002","title":"Det-Tronics 007739-002 Extension Pole, Magnet, 20 ft","description":"\u003ch2\u003ePOLE, EXTENSION, MAGNET, 20FT\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 007739-002 (POLE,EXTENSION,MAGNET,20FT) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648110870752,"sku":"007739-002","price":554.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-007739-002-38254806270176.webp?v=1793787965"},{"product_id":"det-tronics-009246-001","title":"Det-Tronics 009246-001 Low Range Gas Test Cell, OPECL","description":"\u003ch2\u003eLOW RANGE GAS TEST CELL, OPECL\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 009246-001 (LOW Range GAS Test Cell, Opecl) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a gas-sensing element \/ sensor component. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648155173088,"sku":"009246-001","price":1940.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-009246-001-38254951596256.webp?v=1793788038"},{"product_id":"det-tronics-010274-002","title":"Det-Tronics GT3000 (010274-002) Calibration Kit, H2S 25PPM","description":"\u003ch2\u003eCalibration Kit, H2S 25PPM\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 010274-002 (GT3000 CAL KIT,H2S 25PPM) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a calibration gas or calibration accessory. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648194756832,"sku":"010274-002","price":1594.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-010274-002-38255007629536.webp?v=1793788110"},{"product_id":"det-tronics-010274-003","title":"Det-Tronics GT3000 (010274-003) Calibration Kit, H2S 50PPM","description":"\u003ch2\u003eCalibration Kit, H2S 50PPM\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 010274-003 (GT3000 CAL KIT,H2S 50PPM) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a calibration gas or calibration accessory. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648194789600,"sku":"010274-003","price":1594.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-010274-003-38255007662304.webp?v=1793788110"},{"product_id":"det-tronics-010274-004","title":"Det-Tronics GT3000 (010274-004) Calibration Kit, CL2 5 Ppm","description":"\u003ch2\u003eCalibration Kit, CL2 5 Ppm\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 010274-004 (GT3000 CAL Kit, CL2 5 PPM) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a calibration gas or calibration accessory. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648194822368,"sku":"010274-004","price":4284.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-010274-004-38255008022752.webp?v=1793788110"},{"product_id":"det-tronics-010274-005","title":"Det-Tronics GT3000 (010274-005) Calibration Kit, NH3 50PPM","description":"\u003ch2\u003eCalibration Kit, NH3 50PPM\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 010274-005 (GT3000 CAL KIT,NH3 50PPM) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a calibration gas or calibration accessory. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648194855136,"sku":"010274-005","price":4713.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-010274-005-38255008055520.webp?v=1793788110"},{"product_id":"det-tronics-010274-008","title":"Det-Tronics GT3000 (010274-008) Calibration Kit, H2 500 Ppm","description":"\u003ch2\u003eCalibration Kit, H2 500 Ppm\u003c\/h2\u003e\u003cp\u003eThe Det-Tronics 010274-008 (GT3000 CAL KIT,H2 500 PPM) is a genuine Det-Tronics component for fire \u0026amp; gas detection and safety systems. This is a calibration gas or calibration accessory. Supplied by The Fire Alarm Supplier.\u003c\/p\u003e","brand":"Det-Tronics","offers":[{"title":"Default Title","offer_id":47648194920672,"sku":"010274-008","price":1594.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/det-tronics-fire-alarms-default-title-det-tronics-010274-008-38255008121056.webp?v=1793788110"}],"url":"https:\/\/thefirealarmsupplier.com\/collections\/testers.oembed?page=6","provider":"The Fire Alarm Supplier","version":"1.0","type":"link"}