{"title":"Mircom","description":"\u003cp\u003eMircom builds fire alarm and life-safety systems for commercial and multi-residential buildings — addressable and conventional control panels, detection and notification devices, voice evacuation, and the annunciation and networking hardware that ties a campus together.\u003c\/p\u003e \u003cp\u003eMuch of the catalogue is system-specific: modules, cards and displays that belong to a particular panel family. Ordering a replacement means matching the panel series already installed, not just the function you need. Mircom's multi-residential line also covers suite devices and entry systems, which is where it differs from purely commercial manufacturers.\u003c\/p\u003e","products":[{"product_id":"mircom-fs-400-rr-wall-mount-strobe","title":"Mircom FS-400-RR Wall Mount Strobe","description":"\u003cp\u003e\u003cstrong\u003eMircom FS-400-RR\u003c\/strong\u003e — wall mount LED fire alarm strobe, red, with field selectable candela.\u003c\/p\u003e\u003cp\u003eVisible notification exists to reach people who cannot hear a horn, and the output a room needs depends on its size, so a fixed-rating strobe forces an installer to stock several models. The FS-400 offers six settings chosen on a switch on the back of the unit, out of reach once mounted, with the value readable through a front window. Its LED source draws less current than a xenon tube, so more appliances fit per circuit.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eField selectable: 15, 15\/75, 30, 75, 110 and 185 cd\u003c\/li\u003e\n\u003cli\u003eRegulated 24 VDC or 24 V full wave rectified; 16 to 33 V RMS\u003c\/li\u003e\n\u003cli\u003eDraws 25 mA at 15 cd, 179 mA at 185 cd on regulated 24 VDC\u003c\/li\u003e\n\u003cli\u003e1 Hz flash; syncs via a Mircom sync panel or SDM-240 module\u003c\/li\u003e\n\u003cli\u003eOperating temperature 0°C to 50°C (32°F to 122°F), indoor only\u003c\/li\u003e\n\u003cli\u003eTerminals take 12 to 22 AWG; housing 4-27\/32\" (123 mm) square\u003c\/li\u003e\n\u003cli\u003eListed to UL 1971, UL 1638, ULC-S526\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe RR suffix denotes the red model and FS-400-WW the white one. Do not substitute the FHS-400, the horn\/strobe in the same housing, or order the BB-400R expecting an appliance — that is the back box.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133039313120,"sku":"FS-400-RR","price":53.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-strobes-default-title-mircom-fs-400-rr-wall-mount-strobe-31896877793504.jpg?v=1763280427"},{"product_id":"mircom-mix-m500map-monitor-module","title":"Mircom MIX-M500MAP Addressable Monitor Module, Class A or Class B, Advanced Protocol","description":"\u003cp\u003e\u003cstrong\u003eMircom MIX-M500MAP\u003c\/strong\u003e — standard-size addressable monitor module supervising a circuit of dry-contact initiating devices on a Mircom Advanced Protocol loop.\u003c\/p\u003e\u003cp\u003eA monitor module is how a normally open contact — a manual station, a waterflow or tamper switch — reports under its own address instead of disappearing into a shared conventional zone. Address is dialled on rotary decade switches, 01 to 159 in Advanced Protocol mode or 01 to 99 in CLIP mode.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupervises a Style D (Class A) or Style B (Class B) circuit, wired 2-wire or 4-wire fault tolerant\u003c\/li\u003e\n\u003cli\u003ePanel-controlled status LED indicator\u003c\/li\u003e\n\u003cli\u003e15 to 32 V DC; 5.0 mA maximum alarm current with LED on, 400 µA average\u003c\/li\u003e\n\u003cli\u003e47 kΩ end-of-line; IDC limited to 400 µA at 11 V, 40 Ω maximum wiring resistance\u003c\/li\u003e\n\u003cli\u003eMounts to a 4 in. square box of at least 2 1\/8 in. depth; SMB500 surface box available\u003c\/li\u003e\n\u003cli\u003e4.5 × 4 × 1.25 in.; 32 to 120 °F\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe MIX-M501MAP mini module is Class B only, has no panel-controlled LED and fits behind a device; the MIX-M502MAP is the zone interface for two-wire 24 V detectors on a 3.9 kΩ end-of-line; the MIX-M500X is the loop isolator.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133039739104,"sku":"MIX-M500MAP","price":111.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-monitor-modules-default-title-mircom-mix-m500map-monitor-module-31896881397984.jpg?v=1769661334"},{"product_id":"mircom-mix-m501map-monitor-module","title":"Mircom MIX-M501MAP Intelligent Addressable Mini Monitor Module, Class B, Normally Open Contact Devices","description":"\u003cp\u003e\u003cstrong\u003eMircom MIX-M501MAP\u003c\/strong\u003e — intelligent addressable mini monitor module supervising one Class B circuit of normally open dry-contact devices.\u003c\/p\u003e\u003cp\u003eWhere a standard module needs a box of its own, this one is small and light enough to sit inside the device it monitors or the junction box behind it, without rigid mounting. It presents a supervised two-wire initiating circuit to contacts such as waterflow and tamper switches, and reports their state under its own address, so one point identifies which contact operated.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNormally open contacts only, Class B (Style B); 47 kΩ end-of-line supplied\u003c\/li\u003e\n\u003cli\u003e15 to 32 VDC; 400 µA average, one communication every five seconds\u003c\/li\u003e\n\u003cli\u003eMaximum alarm current 600 µA\u003c\/li\u003e\n\u003cli\u003eCircuit limits of 40 Ω, 11 V and 400 µA\u003c\/li\u003e\n\u003cli\u003eRotary decade switches, 01 to 159 in Advanced Protocol, 01 to 99 in CLIP\u003c\/li\u003e\n\u003cli\u003e1.3\" × 2.75\" × 0.65\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMIX-M500MAP is the standard-size monitor module and not a drop-in equivalent: it fits a 4 in square box, supervises Class A or Class B, and carries a panel-controlled status LED this mini omits. MIX-M502MAP is a zone interface for two-wire detectors; MIX-M500X is the loop isolator.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133039771872,"sku":"MIX-M501MAP","price":109.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-monitor-modules-default-title-mircom-mix-m501map-monitor-module-31896882512096.jpg?v=1763279360"},{"product_id":"mircom-ms-710apu-dual-action-pull-station","title":"Mircom MS-710APU Dual-Action Pull Station","description":"\u003ch2\u003eMircom MS-710APU Intelligent Addressable Key Resettable Dual Action Manual\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133039804640,"sku":"MS-710APU","price":169.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-pull-stations-default-title-mircom-ms-710apu-dual-action-pull-station-31896880873696.jpg?v=1763278580"},{"product_id":"mircom-sgm-1004a-indicating-circuit-module","title":"Mircom SGM-1004A Indicating Circuit Module","description":"\u003ch2\u003eMircom SGM-1004A Indicating Circuit Module\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133039837408,"sku":"SGM-1004A","price":191.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-modules-default-title-mircom-sgm-1004a-indicating-circuit-module-31896892670176.jpg?v=1763280430"},{"product_id":"mircom-fr-320-r-dual-releasing-special-hazard-suppression-control-unit","title":"Mircom FR-320-R Dual Releasing Special Hazard Suppression Control Unit","description":"\u003cdiv class=\"elementor-element elementor-element-4dfb473 elementor-widget elementor-widget-woocommerce-product-short-description\" data-id=\"4dfb473\" data-element_type=\"widget\" data-widget_type=\"woocommerce-product-short-description.default\"\u003e\n\u003cdiv class=\"elementor-widget-container\"\u003e\n\u003cdiv class=\"woocommerce-product-details__short-description\"\u003e\n\u003ch2\u003eMircom FR-320-R Field configurable for use on deluge sprinkler systems, pre-action sprinkler systems and agent release systems\u003c\/h2\u003e\n\u003cp\u003eMircom’s FR-320 is a dual releasing special hazard suppression control unit that is field configurable for use on Deluge Sprinkler Systems, Pre-Action Sprinkler Systems and Agent Release Systems.\u003c\/p\u003e\n\u003cp\u003eThe mode of operation is easily configured by selecting one of 14 pre-configured modes of operation. The simple configuration process is done via the front panel and requires no laptop or complicated programming.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133041475808,"sku":"FR-320-R","price":1404.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-control-panels-default-title-mircom-fr-320-r-dual-releasing-special-hazard-suppression-control-unit-38307127656672.jpg?v=1763280456"},{"product_id":"mircom-agd-048-adder-graphic-driver-board","title":"Mircom AGD-048 Adder Graphic Driver Board","description":"\u003ch2\u003eMircom AGD-048 Adder Graphic Driver Board, C\/W 48 Supervised Outputs, Output Connections Via Terminals or Ribbon Cable Mounts in Graphic Wallbox or BB-5008 or BB-5014 Enclosures\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133042786528,"sku":"AGD-048","price":548.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-boards-default-title-mircom-agd-048-adder-graphic-driver-board-31896876089568.jpg?v=1763280435"},{"product_id":"mircom-rax-332-adder-annunciator-module","title":"Mircom RAX-332 Adder Annunciator Module","description":"\u003ch2\u003eMircom RAX-332 Adder Annunciator Module C\/W 32 Bi Colored Alarm\/Supervisory Leds And 32 Zoned Trouble Leds\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133044293856,"sku":"RAX-332","price":374.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-modules-default-title-mircom-rax-332-adder-annunciator-module-31896892276960.jpg?v=1763280446"},{"product_id":"mircom-dox-1024dsr-universal-door-for-ub-1024ds-backbox","title":"Mircom DOX-1024DSR Universal Door for UB-1024DS Backbox","description":"\u003ch2\u003eMircom DOX-1024DSR Universal Door for UB-1024DS Backbox, Red Door\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133044752608,"sku":"DOX-1024DSR","price":281.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-fire-alarms-default-title-mircom-dox-1024dsr-universal-door-for-ub-1024ds-backbox-31896877826272.jpg?v=1763280442"},{"product_id":"mircom-ub-1024ds-universal-backbox-for-compact-main-control-unit","title":"Mircom UB-1024DS Universal Backbox for Compact Main Control Unit","description":"\u003ch2\u003eMircom UB-1024DS Universal Backbox for Compact Main Control Unit\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133045276896,"sku":"UB-1024DS","price":304.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-backboxes-default-title-mircom-ub-1024ds-universal-backbox-for-compact-main-control-unit-31896892702944.jpg?v=1763280460"},{"product_id":"mircom-icac-306-input-class-a-converter-adder-module","title":"Mircom ICAC-306 Input Class A Converter Adder Module","description":"\u003ch2\u003eThe Model ICAC-306 Input Class A Converter Adder Module is used to convert 6 Class B input circuits in the FA300 Fire Alarm Panel to 6 Class A input circuits \u003c\/h2\u003e\n\u003cp\u003eIt mounts under the FA-300 main fire alarm board near the input terminal blocks on the right hand side. \u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133046128864,"sku":"ICAC-306","price":188.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-modules-default-title-mircom-icac-306-input-class-a-converter-adder-module-31896880120032.jpg?v=1763280442"},{"product_id":"mircom-fs-400-ww-wall-mount-strobe","title":"Mircom FS-400-WW Wall Mount Strobe, White","description":"\u003cp\u003e\u003cstrong\u003eMircom FS-400-WW\u003c\/strong\u003e — white wall-mount LED strobe, visible signal only, in the Mircom 400 Series.\u003c\/p\u003e\u003cp\u003eThe FS-400 is the strobe-only member of the family, with no sounder inside. Candela is set on the back of the unit so it cannot be tampered with once mounted, and the setting reads through a front window. The universal mounting plate is installed and wired first, and a shorting clip lets the circuit be tested before the strobe is hung on it and secured with one screw. Synchronization comes from a panel using the Mircom sync protocol or an SDM-240 module.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eField selectable 15, 15\/75, 30, 75, 110 and 185 cd\u003c\/li\u003e\n\u003cli\u003eRegulated 24 VDC RMS current: 25 mA at 15 cd, 39 mA at 30 cd, 102 mA at 75 cd, 105 mA at 110 cd, 179 mA at 185 cd\u003c\/li\u003e\n\u003cli\u003e24 VFWR RMS current: 64 mA at 15 cd through to 241 mA at 185 cd\u003c\/li\u003e\n\u003cli\u003e16 to 33 V RMS operating range, 1 Hz flash rate, 12 to 22 AWG terminals, indoor use only\u003c\/li\u003e\n\u003cli\u003e4-27\/32 in. (123 mm) high and wide; UL 1971, UL 1638, ULC-S526\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFS-400-RR is the red strobe. FHS-400 is the horn-strobe and FH-400 the horn, so do not substitute either here. A BB-400W back box is required only for surface mounting.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133047275744,"sku":"FS-400-WW","price":59.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-strobes-default-title-mircom-fs-400-ww-wall-mount-strobe-31896879562976.jpg?v=1763280460"},{"product_id":"mircom-ocac-304-output-class-a-converter-adder-module","title":"Mircom OCAC-304 Output Class-A Converter Adder Module","description":"\u003ch2\u003eThe Model OCAC-304 Output Class A Converter Adder Module is used to convert 4 Class B output circuits in the FA-300 Fire Alarm Panel to 4 Class A output circuits\u003c\/h2\u003e\n\u003cp\u003eIt mounts under the FA-300 main fire alarm board near the output terminal blocks on the right hand side. \u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133047800032,"sku":"OCAC-304","price":91.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-modules-default-title-mircom-ocac-304-output-class-a-converter-adder-module-31896881823968.jpg?v=1763280452"},{"product_id":"mircom-mhd-65-135-series-65-plug-in-heat-detector","title":"Mircom MHD-65-135 Series 65 Plug In Heat Detector","description":"\u003ch2\u003eMircom MHD-65-135 Series 65 Plug In Heat Detector 135 Degrees Requires MSB-65B Base\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133048029408,"sku":"MHD-65-135","price":27.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-heat-detectors-default-title-mircom-mhd-65-135-series-65-plug-in-heat-detector-31896879923424.jpg?v=1763280470"},{"product_id":"mircom-bb-700wp-weatherproof-surface-mount-backbox-red","title":"Mircom BB-700WP Weatherproof Surface Mount Backbox Red","description":"\u003ch2\u003eMircom BB-700WP Series 700 Weatherproof Surface Mount Backbox Red\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133048127712,"sku":"BB-700WP","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-backboxes-default-title-mircom-bb-700wp-weatherproof-surface-mount-backbox-red-31896878416096.jpg?v=1763280467"},{"product_id":"mircom-ms-710u-dual-action-pull-station","title":"Mircom MS-710U Dual-Action Pull Station","description":"\u003ch2\u003eMircom MS-710U is a high-quality manual fire reporting unit with dual action, SPST contacts, and optional auxiliary contacts\u003c\/h2\u003e\n\u003cp\u003eIts gold-plated contacts prevent corrosion and it is available with a weather-proof backbox for outdoor use. The unit is constructed of diecast metal, finished in red enamel paint for quick identification, and meets ADA requirements. It mounts on standard single gang boxes and is key resettable. Installed as per UL and other applicable codes, the immediate operation of the alarm detection circuit is initiated by pulling the handle.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual Action\u003c\/li\u003e\n\u003cli\u003eKey resettable\u003c\/li\u003e\n\u003cli\u003eTerminal connectors\u003c\/li\u003e\n\u003cli\u003eGold-plated SPST contacts\u003c\/li\u003e\n\u003cli\u003eOptional auxiliary contacts\u003c\/li\u003e\n\u003cli\u003eHigh-gloss red enamel finish\u003c\/li\u003e\n\u003cli\u003ePlastic break rod\u003c\/li\u003e\n\u003cli\u003eMeets ADA 5 lb. maximum manual-force\u003c\/li\u003e\n\u003cli\u003eMounts on standard single gang box, Mircom’s BB-700 surface metal backbox or BB-700WP weatherproof backbox\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed of high-quality diecast metal\u003c\/li\u003e\n\u003cli\u003eFinished in red enamel paint for quick identification\u003c\/li\u003e\n\u003cli\u003ePulling the handle initiates the immediate operation of the alarm detection circuit\u003c\/li\u003e\n\u003cli\u003eRated for 1 amp, 30 VDC\u003c\/li\u003e\n\u003cli\u003eContacts are gold-plated to avoid corrosion\u003c\/li\u003e\n\u003cli\u003eListed for outdoor applications when used with the BB-700WP\u003c\/li\u003e\n\u003cli\u003eOperating instructions in raised English lettering\u003c\/li\u003e\n\u003cli\u003eInstalled as per specific requirements outlined in UL codes, as well as all other applicable national or local codes\u003c\/li\u003e\n\u003cli\u003eFinal acceptance is subject to the local authority having jurisdiction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133048193248,"sku":"MS-710U","price":78.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-pull-stations-default-title-mircom-ms-710u-dual-action-pull-station-37462752985312.png?v=1763280471"},{"product_id":"mircom-msb-65b-4r-series-65-four-wire-base","title":"Mircom MSB-65B-4R Series 65 Four-Wire Base","description":"\u003ch2\u003eMircom MSB-65B-4R Series 65 Four-Wire Base C\/W Auxiliary Form Ft.Cft. Contact\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133048848608,"sku":"MSB-65B-4R","price":21.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-bases-default-title-mircom-msb-65b-4r-series-65-four-wire-base-31896881758432.jpg?v=1763280466"},{"product_id":"mircom-ms-401u-single-stage-pull-station","title":"Mircom MS-401U Single Stage Pull Station","description":"\u003ch2\u003eMircom MS-401U Single Stage Pull Station (N.O.. With Station Closed)\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133048914144,"sku":"MS-401U","price":33.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-pull-stations-default-title-mircom-ms-401u-single-stage-pull-station-31896883364064.jpg?v=1763280476"},{"product_id":"mircom-msb-65b-2-wire-base","title":"Mircom MSB-65B 2-Wire Base","description":"\u003ch2\u003eMircom MSB-65B Series 65 Two-Wire Base\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133048979680,"sku":"MSB-65B","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-bases-default-title-mircom-msb-65b-2-wire-base-31896881266912.jpg?v=1771879902"},{"product_id":"mircom-bb-400r-red-surface-mount-back-box","title":"Mircom BB-400R Red Surface Mount Back Box","description":"\u003cp\u003e\u003cstrong\u003eMircom BB-400R\u003c\/strong\u003e — red plastic surface-mount back box for the Mircom (MGC) 400 Series LED notification appliances.\u003c\/p\u003e\u003cp\u003eOn masonry, block or exposed-conduit work there is no recessed box to land an appliance on. The BB-400R gives the 400 Series a surface box that still takes conduit: the appliance's universal mounting plate screws to the box, the appliance snaps onto the plate, and one #4-40 × 3\/8\" screw plus a snap-on nameplate finish it.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRed finish; BB-400W is the white version\u003c\/li\u003e\n\u003cli\u003e4 27\/32\" × 4 27\/32\" (123 mm × 123 mm), 1 51\/64\" (46 mm) deep\u003c\/li\u003e\n\u003cli\u003eKnockout size 1 1\/16\" (27 mm)\u003c\/li\u003e\n\u003cli\u003eConduit entries on all sides plus a knockout at the back\u003c\/li\u003e\n\u003cli\u003eFits Mircom\/MGC 400 Series LED appliances such as FHS-400-RR\u003c\/li\u003e\n\u003cli\u003eIndoor use only\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBack box only — no horn, strobe or horn\/strobe is included. The 400 Series mounting plate also fits single-gang, double-gang, octagon, 4-inch square and 4-inch junction boxes, so order the BB-400R only when you are surface mounting, and match the box color to the appliance.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133049405664,"sku":"BB-400R","price":22.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-backboxes-default-title-mircom-bb-400r-red-surface-mount-back-box-31896877465824.jpg?v=1763280474"},{"product_id":"mircom-gl-004k-glass-rod-replacement","title":"Mircom GL-004K Glass Rod Replacement","description":"\u003ch2\u003eMircom GL-004K Glass Rod Replacement for Ms-400 Series (Pkg. Of 10)\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133049602272,"sku":"GL-004K","price":13.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-replacement-break-rod-default-title-mircom-gl-004k-glass-rod-replacement-31896878317792.jpg?v=1770202088"},{"product_id":"mircom-mcrpl-lk-306f-fire-alarm-lock-assembly","title":"Mircom MCRPL-LK-306F Fire Alarm Lock Assembly","description":"\u003ch2\u003eMircom MCRPL-LK-306F Fire Alarm Lock Assembly C\/W 2 Keys\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133049635040,"sku":"MCRPL-LK-306F","price":11.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-accessories-default-title-mircom-mcrpl-lk-306f-fire-alarm-lock-assembly-31896879464672.jpg?v=1763280483"},{"product_id":"mircom-mh-25w-mini-piezo-24-vdc-white-flush-mount","title":"Mircom MH-25W Mini-Piezo, 24 VDC, White, Flush Mount","description":"\u003ch2\u003eMircom MH-25W Mini-Piezo, 24 VDC, White, Flush Mount\u003c\/h2\u003e\n\u003cp\u003eFor Surface Mount use BB-300W.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133049700576,"sku":"MH-25W","price":11.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-fire-alarms-default-title-mircom-mh-25w-mini-piezo-24-vdc-white-flush-mount-31896878252256.jpg?v=1763280484"},{"product_id":"mircom-mix-m500rap-relay-control-module","title":"Mircom MIX-M500RAP Relay Control Module","description":"\u003cp\u003e\u003cstrong\u003eMircom MIX-M500RAP\u003c\/strong\u003e — intelligent relay control module for two-wire addressable fire alarm systems.\u003c\/p\u003e\u003cp\u003eThe module gives the panel dry-contact control of auxiliary equipment — fans, dampers, door holders, elevator recall interfaces and similar devices — from a single SLC address.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo isolated Form-C (double-pole, double-throw) contacts\u003c\/li\u003e\n\u003cli\u003eRotary decade address switches: addresses 01–159 in Advanced Protocol (AP) mode, 01–99 in CLIP mode\u003c\/li\u003e\n\u003cli\u003eWorks on Mircom Advanced Protocol and legacy CLIP protocol loops\u003c\/li\u003e\n\u003cli\u003eMounts directly to a 4\" square electrical box with a minimum depth of 2 1\/8\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe MIX-M500RAPA is a related variant — confirm which one the system drawings call for, and set the address before the module goes in the ceiling.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133053436128,"sku":"MIX-M500RAP","price":137.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-modules-default-title-mircom-mix-m500rap-relay-control-module-31896882741472.jpg?v=1763280483"},{"product_id":"mircom-mix-m500sap-supervised-output-module","title":"Mircom MIX-M500SAP Supervised Output Module","description":"\u003ch2\u003eMircom MIX-M500SAP Advanced Protocol Intelligent Supervised Output Module\u003c\/h2\u003e\n\u003cp\u003eMounts In 4In. Square Electrical Backbox By Others\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133091938528,"sku":"MIX-M500SAP","price":105.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-modules-default-title-mircom-mix-m500sap-supervised-output-module-31896883167456.jpg?v=1763280521"},{"product_id":"mircom-inx-10a-intelligent-booster-power-supply","title":"Mircom INX-10A Intelligent Booster Power Supply","description":"\u003ch2\u003eMircom’s INX-10AC is an Intelligent Booster Power Supply that extends the power capabilities of existing notification appliance circuits as well as provides power for other ancillary devices (UL, ULC and FM Approved)\u003c\/h2\u003e\n\u003cp\u003eThe INX-10AC provides 10 amperes of power and mounts inside the BB-5014 enclosure.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133093511392,"sku":"INX-10A","price":719.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-power-supplies-default-title-mircom-inx-10a-intelligent-booster-power-supply-38307086270688.png?v=1763280536"},{"product_id":"mircom-mix-2351ap-intelligent-photoelectric-smoke-detector","title":"Mircom MIX-2351AP Addressable Photoelectric Smoke Sensor","description":"\u003cp\u003e\u003cstrong\u003eMircom MIX-2351AP\u003c\/strong\u003e — a Select Series low-profile intelligent photoelectric smoke detector, addressable by rotary switch and reporting analog smoke density to a compatible Mircom fire alarm control panel.\u003c\/p\u003e\n\u003cp\u003eThe MIX-2351AP is a plug-in detector head with point ID capability: each address is set with on-board rotary address switches, so the panel identifies the exact device location rather than a zone. Its re-designed optical sensing chamber is engineered to sense smoke from a wide range of combustion sources in line with more stringent code standards, and detector sensitivity is continually monitored and reported back to the panel. Sensitivity itself is programmed through the control panel software to suit the environment. Mircom’s Advanced Protocol is a high-speed communication protocol that increases the speed of communication between intelligent devices on the loop. Dual LEDs give 360° visibility. The detector head ships on its own — the mounting base (B300-6, B501-WHITE or a sounder, isolator or relay base) is ordered separately.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection technology\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePhotoelectric (smoke only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eListing version\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL; white. The ULC equivalent is the MIX-2351APA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 to 32 VDC peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating current @ 24 VDC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 µA (one communication every 5 seconds, green LED blink on communication)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 mA @ 24 VDC (one communication every 5 seconds, amber LED solid on)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum alarm current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 mA @ 24 VDC (one communication every 5 seconds, red LED solid on)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.0 in. (51 mm) installed in a B300-6 \/ B300A-6 base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.2 in. (156 mm) in a B300-6 \/ B300A-6 base; 4.1 in. (104 mm) in a B501-WHITE \/ -IV base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 oz (95 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32°F to 122°F (0°C to 50°C); duct applications -4°F to 158°F (-20°C to 70°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating humidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10% to 93%, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUL-listed velocity range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 to 4,000 ft\/min (0 to 1,219 m\/min) — suitable for installation in ducts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAddressing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRotary address switches, point ID\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAnalog, Mircom Advanced Protocol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIndicators\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual LEDs for 360° visibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDesigned to meet UL 268 7th Edition and UL 521 Listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe head is not the detector:\u003c\/strong\u003e the published height and diameter figures only apply once the head is seated in a base, and the two base families give different diameters — 6.2 in. on the 6-inch flanged B300-6, 4.1 in. on the 4-inch flangeless B501. Choose the base before cutting ceiling openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhotoelectric only, no thermal element:\u003c\/strong\u003e the MIX-2351AP senses smoke. The 135°F (57°C) fixed-temperature thermal sensing with dual electronic thermistors belongs to the MIX-2351TAP multi-sensor, not to this model. Do not specify the AP where a sequence needs heat detection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote test is a different part:\u003c\/strong\u003e remote test capability for use with a duct smoke detector is a feature of the MIX-2351RAP, not the MIX-2351AP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity lives in the panel:\u003c\/strong\u003e detector sensitivity is programmed in the control panel software, not set on the head, so a replacement head inherits whatever the panel has stored for that address.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL versus ULC:\u003c\/strong\u003e order the MIX-2351AP for UL jurisdictions and the MIX-2351APA, designed to meet CAN\/ULC S529 Rev. 4 and CAN\/ULC S530, for Canadian ones. Bases are also split into UL (B300-6) and ULC (B300A-6) part numbers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIX-2351APA\u003c\/strong\u003e — same photoelectric detector in the ULC listing for Canada.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIX-2351RAP \/ RAPA\u003c\/strong\u003e — photoelectric detector that is remote test capable, for use with duct smoke detectors (UL \/ ULC).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIX-2351TAP \/ TAPA\u003c\/strong\u003e — multi-sensor adding thermal detection through dual electronic thermistors at 135°F (57°C) fixed temperature, supporting the NFPA 72 2019 21.5 Fire Service Access Elevator temperature display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB300-6 \/ B501-WHITE\u003c\/strong\u003e — 6-inch flanged and 4-inch flangeless mounting bases; B200SR sounder, B224BI isolator and B224RB relay bases are also available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCK300 \/ TR300\u003c\/strong\u003e — colour kits (white, ivory, black) and trim rings; RA100Z remote LED annunciator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from the Mircom data sheet \"Select Series Intelligent Smoke Detector MIX-2351AP(A) \/ RAP(A) \/ TAP(A),\" catalogue number CAT-5898, Rev. 2. Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43133146104032,"sku":"MIX-2351AP","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-smoke-detectors-default-title-mircom-mix-2351ap-advanced-protocol-intelligent-photoelectric-smoke-sensor-38307114156256.png?v=1763280322"},{"product_id":"mircom-mix-5351rap-thermal-sensor-fixed-heat-and-rate-of-rise","title":"Mircom MIX-5351RAP Thermal Sensor Fixed Heat and Rate of Rise","description":"\u003ch2\u003eMircom MIX-5351RAP Intelligent Ul Thermal Sensor Fixed Heat and Rate of Rise White\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43330458452192,"sku":"MIX-5351RAP","price":52.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-heat-detectors-default-title-mircom-mix-5351rap-thermal-sensor-fixed-heat-and-rate-of-rise-31896882708704.jpg?v=1763281152"},{"product_id":"mircom-td-200-fixed-temperature-200-f","title":"Mircom TD-200 Fixed-Temperature 200°F","description":"\u003ch2\u003eMircom TD-200 Fixed-Temperature 200°F Self Restoring Heat Detector\u003cbr\u003e\n\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43601835065568,"sku":"TD-200","price":20.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-heat-detectors-default-title-mircom-td-200-fixed-temperature-200-f-37389621592288.jpg?v=1763281310"},{"product_id":"mircom-ms-703u-blue-single-action-pull-station","title":"Mircom MS-703U Blue Single Action Pull Station","description":"\u003ch2\u003eMircom MS-703U Blue Single Action Emergency Station W\/ 2 Form Ft. Cft. Contacts Key Resettable\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43701212807392,"sku":"MS-703U","price":65.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-pull-stations-default-title-mircom-ms-703u-blue-single-action-pull-station-31896882118880.jpg?v=1763281341"},{"product_id":"mircom-fhs-400c-ww-white-ceiling-mount-horn-strobe","title":"Mircom FHS-400C-WW White Ceiling Mount Horn Strobe","description":"\u003ch2\u003eMircom FHS-400C-WW White Ceiling Mount Horn Strobe\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43702163144928,"sku":"FHS-400C-WW","price":78.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-horn-strobes-default-title-mircom-fhs-400c-ww-white-ceiling-mount-horn-strobe-31896877007072.jpg?v=1763281371"},{"product_id":"mircom-mix-4050-sync-module","title":"Mircom MIX-4050 Sync Module","description":"\u003ch2\u003eThe MIX-4050 Sync Module is designed to synchronize the MGC notification devices\u003c\/h2\u003e\n\u003cp\u003eThe module can be used to synchronize the strobe flashes with the audio signal pattern. The same protocol is used to silence the horn while maintaining the strobe flashes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe MIX-4050 Sync Module is designed to be used with MGC NAC devices\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe module can synchronize one (1) class A or two (2) class B NAC lines without the need for programming.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports two stage alarm function of “Alert” and “Evac”\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis Sync Module is fail-safe and will provide power to the NAC line by default through a relay\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe MIX-4050 has an isolated sync input\/output which allows to link up to 20 modules together\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMounts in a standard 4” square or double gang electrical back box\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemperature range 32ºF to 120ºF  (0ºC to 49ºC)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplies with all agency requirements including the 2016 edition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Sync module uses no power during standby\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not require addressing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA built-in LED indicates activation and master \/ slave status\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe Sync module is compatible with any UL\/ULC listed panels and power supplies capable of providing regulated 24VDC or FWR for NACs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe interconnected MIX-4050 devices synchronize automatically without the need of programming or jumper setting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE DEVICES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMGC FH-400 Series\u003cbr\u003e– Horns\u003cbr\u003e– Strobes\u003cbr\u003eMGC FHS-400 Series Horn Strobes\u003cbr\u003eMGC SPPS Series\u003cbr\u003e– Speakers\u003cbr\u003e– Speaker Strobes\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43702214951136,"sku":"MIX-4050","price":64.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-sync-modules-default-title-mircom-mix-4050-sync-module-38307124838624.png?v=1763281366"},{"product_id":"mircom-bb-2-addressable-multi-module-backbox","title":"Mircom BB-2 Addressable Multi-Module Backbox","description":"\u003ch2\u003eMircom BB-2 Addressable Multi-Module Backbox C\/W Built In Chassis for Two Input or Output Multi-Module Boards\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43793398989024,"sku":"BB-2","price":100.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-backboxes-default-title-mircom-bb-2-addressable-multi-module-backbox-31896879104224.jpg?v=1763283473"},{"product_id":"mircom-mix-5351ap-intelligent-heat-detector","title":"Mircom MIX-5351AP Intelligent Heat Detector","description":"\u003ch2\u003eMircom MIX-5351AP Intelligent Heat Detector offers 135°F (57°C) Fixed Thermal Detection\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43833627082976,"sku":"MIX-5351AP","price":91.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-heat-detectors-default-title-mircom-mix-5351ap-intelligent-heat-detector-31896879857888.jpg?v=1763283591"},{"product_id":"mircom-mix-2351tap-smoke-and-thermal-sensor","title":"Mircom MIX-2351TAP Smoke and Thermal Sensor","description":"\u003ch2\u003eMircom MIX-2351TAP Intelligent Ul Photo Smoke W\/ Thermal Sensor White\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":43836138619104,"sku":"MIX-2351TAP","price":169.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-smoke-detectors-default-title-mircom-mix-2351tap-smoke-and-thermal-sensor-31896879661280.jpg?v=1763283562"},{"product_id":"mircom-mix-2351tirap-multi-criteria-photoelectric","title":"Mircom MIX-2351TIRAP Multi-Criteria Photoelectric","description":"\u003ch2\u003eMircom MIX-2351TIRAP Advanced Protocol Multi-Criteria Photoelectric, Thermal and Infrared Sensor (Base is Sold Separately)\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":44117099249888,"sku":"MIX-2351TIRAP","price":122.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-multi-criteria-detectors-default-title-mircom-mix-2351tirap-multi-criteria-photoelectric-36618326507744.jpg?v=1763283729"},{"product_id":"mircom-mstn-5-0-5-0-ft-sampling-tube","title":"Mircom MSTN-5.0 5.0 ft. Sampling Tube","description":"\u003ch2\u003eMircom MSTN-5.0 5.0 ft. Sampling Tube for MDH-SL2000 and DH3000 Series\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":44117099348192,"sku":"MSTN-5.0","price":67.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-sampling-tubes-default-title-mircom-mstn-5-0-5-0-ft-sampling-tube-31896880972000.jpg?v=1763283713"},{"product_id":"mircom-mix-m500sa-supervised-control-module","title":"Mircom MIX-M500SA Supervised Control Module","description":"\u003ch2\u003eMircom MIX-M500SA Relay Control Module\u003c\/h2\u003e\n\u003cp\u003eM500SA Supervised Control Modules are intended for use in intelligent, twowire systems, where the individual address of each module is selected using the built-in rotary decade switches.\u003c\/p\u003e\n\u003cp\u003eThis module is used to switch an external power supply, which can be a DC power supply or an audio amplifier (up to 80 VRMS), to notification appliances. It also supervises the wiring to the connected loads and reports their status to the panel as NORMAL, OPEN, or SHORT CIRCUIT.\u003c\/p\u003e\n\u003cp\u003eThe M500SA has two pairs of output termination points available for fault-tolerant wiring and a panel-controlled LED indicator. This module can be used to replace an M500CA module that has been configured for supervised wiring operation.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":44264463171808,"sku":"MIX-M500SA","price":21.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-control-modules-default-title-mircom-mix-m500sa-supervised-control-module-36342323380448.webp?v=1763284356"},{"product_id":"mircom-mix-2351rap-smoke-sensor","title":"Mircom MIX-2351RAP Smoke Sensor","description":"\u003ch2\u003eMIX-2351RAP is a plug-in type smoke sensor that combines a photo-electronic sensing chamber with addressable-analog communications\u003c\/h2\u003e\n\u003cp\u003eWhen used in duct applications with a DNR(W), testing can be done remotely using approved System Sensor test accessories, eliminating the need for a test coil. The sensors transmit an analog representation of smoke density over a communication line to a control panel. Rotary dial switches are provided for setting the sensor’s address.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":44511150276832,"sku":"MIX-2351RAP","price":151.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/mircom-smoke-detectors-default-title-mircom-mix-2351rap-smoke-sensor-32148564082912.jpg?v=1763284651"},{"product_id":"mircom-fh-400-rr-red-wall-ceiling-mount-horn","title":"Mircom FH-400-RR Wall\/Ceiling Mount Horn, Red","description":"\u003cp\u003e\u003cstrong\u003eMircom FH-400-RR\u003c\/strong\u003e — red wall or ceiling mount fire alarm horn, audible only.\u003c\/p\u003e\u003cp\u003eThe FH-400 is the horn-only member of the Mircom 400 series, and it is listed for wall and ceiling mounting alike — which is where it parts company with the FHS-400 horn\/strobe range. Four tones (temporal, continuous, march time and 20 BPM) and two volume levels are set on DIP switches on the back of the unit, and a universal mounting plate lets the installer pre-wire and test the circuit before the horn is fitted.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNominal 24 VDC regulated or 24 VFWR; operating range 16 to 33 V RMS\u003c\/li\u003e\n\u003cli\u003eRMS current at regulated 24 VDC: 37 mA high volume, 22 mA low; at 24 VFWR 31 mA high, 25 mA low\u003c\/li\u003e\n\u003cli\u003eReverberant dBA at 10 ft per UL 464, regulated 24 VDC: continuous 89.2 high \/ 84.0 low, temporal 84.9 \/ 80.5\u003c\/li\u003e\n\u003cli\u003eMounts to single gang, double gang, octagon or 4-inch boxes; 12 to 22 AWG terminals\u003c\/li\u003e\n\u003cli\u003e4-27\/32\" (123 mm) high and wide; 0° to 50°C, indoor use only; UL 464 and ULC-S525\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe BB-400R back box is needed only for surface mounting. Do not substitute the FHS-400-RR, a wall-mount horn\/strobe with its own candela and current tables, or the white FH-400-WW.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":46325009219808,"sku":"FH-400-RR","price":47.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-horns-default-title-mircom-fh-400-rr-red-wall-ceiling-mount-horn-34869726052576.jpg?v=1763285332"},{"product_id":"mircom-cr-6-six-addressable-relay-control-module","title":"Mircom CR-6 Six Relay Control Module, 6 Form-C Relays","description":"\u003cp\u003e\u003cstrong\u003eMircom CR-6\u003c\/strong\u003e — Mircom 500 Series addressable control module carrying six Form-C relays on one card.\u003c\/p\u003e\u003cp\u003eWhere a sequence needs several dry-contact outputs in one place — elevator recall, door holders, damper and fan shutdown — six single modules mean six boxes and six sets of terminations. The first address is set from 01 to 94 on rotary switches and the module claims the next five automatically, with up to three unused addresses disable-able. Each address drives one isolated set of dry contacts, wired normally open or normally closed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating voltage 15–32 VDC; maximum SLC wiring resistance 40 Ω\u003c\/li\u003e\n\u003cli\u003eStandby 1.45 mA max; alarm 32 mA max with all six relays switched and all LEDs on\u003c\/li\u003e\n\u003cli\u003eRelay contact rating 30 VDC; 70.7 VAC\u003c\/li\u003e\n\u003cli\u003eRemovable plug-in terminal blocks, 12–18 AWG\u003c\/li\u003e\n\u003cli\u003eMounts two per BB-2 enclosure, or six per BB-6 with the CH-6 chassis\u003c\/li\u003e\n\u003cli\u003eMircom lists it as a UL-listed loop module for the FX-2000 and FleX-Net series\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTwo easy mistakes: the Canadian version carries an A suffix (CR-6A, the ULC-listed part), and the SC-6 is the six-circuit module that supervises its output wiring. The CR-6 does not supervise the controlled circuit.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":46325009776864,"sku":"CR-6","price":802.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-modules-default-title-mircom-cr-6-six-addressable-relay-control-module-34869621391584.jpg?v=1763285301"},{"product_id":"mircom-fx-3318-fire-alarm-control-panel","title":"Mircom FX-3318 Fire Alarm Control Panel","description":"\u003ch2\u003eMircom\"™s FX-3318 Addressable Fire Alarm Control Panel\u003c\/h2\u003e\n\u003cp\u003eThe \u003cb\u003eMircom FX-3318\u003c\/b\u003e is a comprehensive, genuine OEM enclosure assembly engineered for commercial fire alarm and life safety installations. Featuring a durable black backbox paired with a high-visibility red door, this all-in-one unit comes fully equipped with the main control board, built-in power supply, transformer, and an intuitive 4x20 LCD display. Designed for seamless compatibility with Mircom FX-2000, FleX-Net, and TX3 Series systems, it provides a reliable, factory-standard solution for new deployments and critical system retrofits. Ships brand new in original packaging; please allow up to 10 business days for dispatch as this is a long-lead item.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":46816375144672,"sku":"FX-3318","price":2420.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-control-panels-default-title-mircom-fx-3318-fire-alarm-control-panel-36024210915552.jpg?v=1763285673"},{"product_id":"mircom-fs-400c-ww-ceiling-mount-strobe-white","title":"Mircom FS-400C-WW Ceiling Mount Strobe White","description":"\u003cp\u003e\u003cstrong\u003eMircom FS-400C-WW\u003c\/strong\u003e — white ceiling-mount LED strobe, field-selectable 15\/15-75\/30\/75\/110 cd.\u003c\/p\u003e\u003cp\u003eCeiling mounting is the practical answer in corridors, lobbies and open areas where wall space is taken or sightlines are poor. The FS-400C uses an LED source rather than a xenon tube, so current draw drops and more devices fit on a NAC. The candela setting shows through the front window; the selector sits on the back, out of reach of tampering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStrobe only, no horn; indoor use\u003c\/li\u003e\n\u003cli\u003e24 VDC regulated or 24 VFWR; operating range 16 to 33 V RMS\u003c\/li\u003e\n\u003cli\u003eCurrent at 24 VDC regulated: 37 mA at 15 cd rising to 226 mA at 110 cd\u003c\/li\u003e\n\u003cli\u003eFlash rate 1 Hz; 0°C to 50°C\u003c\/li\u003e\n\u003cli\u003e4 27\/32\" (123 mm) square; takes 12 to 22 AWG\u003c\/li\u003e\n\u003cli\u003eUL 1971, UL 1638 and ULC-S526 listed; universal mounting plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor surface mount, order the \u003cstrong\u003eBB-400W\u003c\/strong\u003e white back box — the BB-400R is the red version and will not match this appliance. Mircom white 400-series models also carry an \u003cem\u003eALERT\u003c\/em\u003e label rather than FIRE, so do not order white where a FIRE-marked appliance is specified.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":47316549697760,"sku":"FS-400C-WW","price":66.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-strobes-default-title-mircom-fs-400c-ww-ceiling-mount-strobe-white-37218434842848.jpg?v=1763286243"},{"product_id":"mircom-td-135-fixed-temperature-135-f-self-restoring-heat-detector","title":"Mircom TD-135 Fixed Temperature 135°F Self Restoring Heat Detector","description":"\u003ch2\u003eMircom TD-135 Fixed Temperature 135°F Heat Detector\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eA neutral white exterior and an unobtrusive, low profile housing make the TD heat detector blend onto any ceiling\u003c\/p\u003e\n\u003cp\u003eThe plastic housing fits onto any standard octagon or square electrical box with a trim plate. The unit will protrude no more than 1\" below the surface of the finishing ceiling. Using a bi-metal disc as a heat sensing element, an alarm is initiated when the air temperature exceeds the unit's rated level. Only when the air temperature decreases below the rated level will the detector automatically reset.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoverage: 225 Square' pacing: 15' centre, 7.5' from Wall\u003c\/li\u003e\n\u003cli\u003eConstructed of fire resistant thermoplastic material\u003c\/li\u003e\n\u003cli\u003eOperation shall consist of the closing of N.O. contact to initiate an alarm detection circuit\u003c\/li\u003e\n\u003cli\u003eSelf Restoring\u003c\/li\u003e\n\u003cli\u003eDiameter: 5.5\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":47486366712032,"sku":"TD-135","price":13.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-heat-detectors-default-title-mircom-td-135-fixed-temperature-135-f-self-restoring-heat-detector-37668489461984.jpg?v=1763286334"},{"product_id":"mircom-udact-300a-digital-alarm-communicator-transmitter-dialer-module","title":"Mircom UDACT-300A Digital Alarm Communicator Transmitter Dialer Module","description":"\u003ch2\u003eThe UDACT-300A Digital Alarm Communicator Transmitter\/Dialer Module allows Mircom’s FA-1000 Series, FX-2000 and FleX-Net Series Fire Alarm Control Panels to transmit Alarm, Supervisory and Trouble information on two telephone lines to a monitoring facility\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":47486366974176,"sku":"UDACT-300A","price":585.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-modules-default-title-mircom-udact-300a-digital-alarm-communicator-transmitter-dialer-module-37656964727008.png?v=1763286338"},{"product_id":"mircom-fhs-400-rr-wall-mount-horn-strobe","title":"Mircom FHS-400-RR Wall Mount Horn Strobe, Red","description":"\u003cp\u003e\u003cstrong\u003eMircom FHS-400-RR\u003c\/strong\u003e — red wall-mount LED horn\/strobe for indoor notification appliance circuits.\u003c\/p\u003e\u003cp\u003eLED strobe optics draw far less than a xenon equivalent, which lets a designer hang more appliances on a NAC before adding a booster supply. Candela and tone are set from the back of the unit so they cannot be altered once it is mounted, yet the selected candela stays readable through the front window at inspection.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eField-selectable candela: 15, 15\/75, 30, 75, 110 and 185 cd\u003c\/li\u003e\n\u003cli\u003eTemporal, continuous, march time and 20 BPM tones, each at high or low volume\u003c\/li\u003e\n\u003cli\u003e24 VDC regulated or 24 VFWR nominal; 16 to 33 V RMS operating range\u003c\/li\u003e\n\u003cli\u003e30 mA at 15 cd and 180 mA at 185 cd (24 VDC, temporal, high volume)\u003c\/li\u003e\n\u003cli\u003e84.9 dBA at 10 ft, temporal high volume, 24 VDC per UL 464\u003c\/li\u003e\n\u003cli\u003e4-27\/32\" × 4-27\/32\" (123 × 123 mm); 12 to 22 AWG; 1 Hz flash rate\u003c\/li\u003e\n\u003cli\u003eUL 464, UL 1638, UL 1971, ULC-S525, ULC-S526\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIndoor use only, 32° to 122°F. Wet or outdoor locations require the FHS-400-WP instead. Surface mounting needs a BB-400R back box, ordered separately.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":47515209826528,"sku":"FHS-400-RR","price":74.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-horn-strobes-default-title-mircom-fhs-400-rr-wall-mount-horn-strobe-37684159906016.jpg?v=1763286383"},{"product_id":"mircom-sd-2wt-led-2-wire-photoelectric-smoke-thermal-detector","title":"Mircom SD-2WT-LED 2-Wire Photoelectric Smoke Thermal Detector","description":"\u003ch2\u003eThe Mircom SD-2WT-LED is a two-wire smoke detector that uses photoelectric technology in conjunction with a fixed temperature heat sensor to further extend its sensing capabilities. 24VDC c\/w LED output\u003cbr\u003e\n\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":47551443501280,"sku":"SD-2WT-LED","price":34.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-smoke-and-heat-detectors-default-title-mircom-sd-2wt-led-2-wire-photoelectric-smoke-thermal-detector-37844498219232.webp?v=1763286419"},{"product_id":"mircom-fx-2017-12nds-networkable-intelligent-fire-alarm-control","title":"Mircom FX-2017-12NDS Networkable Intelligent Fire Alarm Control","description":"\u003ch2\u003eMircom FX-2017-12NDS Networkable Intelligent Fire Alarm Control Chassis with FleXNet Main Board, 1 Analog Loop Controller, 2 Conventional Adder Module Loops, LC\u003c\/h2\u003e\n\u003cp\u003eFleX-Net Large Size Network Panel is a powerful intelligent networkable fire alarm solution. It has many levels of flexibility to meet virtually any application of detection, control, notification and emergency communications. Features such as fire detection \u0026amp; alarm, audio\/voice evacuation, BACnet, Boolean logic, networking and graphical work stations allow this modular solution to accommodate the simplest systems up to the most complex solutions.\u003c\/p\u003e\n\u003cp\u003eWith the addition of the Advanced Protocol (AP), Fire\/CO detection and 520 Hz support on both the addressable loop and through the audio\/voice evacuation, Mircom’s FleX-Net takes you even farther into the future with expanded capabilities.. Designed for peer-to-peer network communications, the FX-2017-12NDS allows for a maximum of 63 nodes, while providing reliability, flexibility and expandability.\u003c\/p\u003e\n\u003cp\u003eThe FleX-Net Large Size Network Panel consists of one intelligent signalling line circuit (SLC) capable of supporting 159 analog Sensors and 159 addressable modules. In addition, the base panel includes Four Style Z\/Y (Class A\/B) Notification Appliance Circuits and an easy to read and use, large 4 x 20 back-lit alphanumeric LCD display.\u003c\/p\u003e\n\u003cp\u003eThe network configuration allows the FleX-Net Large Size Network Panel to be connected to a Mircom network. This connection provides additional input circuits, visual zones, programmable notification appliance circuits, and relays. The network interface module allows the panels to communicate on a peer-to-peer network via a Proprietary Arcnet Network Communications protocol.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":47635569803488,"sku":"FX-2017-12NDS","price":2391.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-control-panels-default-title-mircom-fx-2017-12nds-networkable-intelligent-fire-alarm-control-38254762000608.jpg?v=1763286506"},{"product_id":"mircom-fx-2003-12nds-networkable-intelligent-fire-alarm-control","title":"Mircom FX-2003-12NDS Networkable Intelligent Fire Alarm Control","description":"\u003ch2\u003eMircom FX-2003-12NDS Networkable Intelligent Fire Alarm Control Chassis w FleXNet Main Board, 1 Analog Loop Controller, 2 Conventional Loops, 20x4 LCD, 4 Class\u003c\/h2\u003e\n\u003cp\u003eThe FleX-Net Compact Network Panel is a powerful intelligent networkable fire alarm solution. It has many levels of flexibility to meet virtually any application of detection, control, notification and emergency communications. Features such as fire detection \u0026amp; alarm, audio\/voice evacuation, BACnet, Boolean logic, networking and graphical work stations allow this modular solution to accommodate the simplest systems up to the most complex solutions.\u003c\/p\u003e\n\u003cp\u003eWith the addition of the Advanced Protocol (AP), Fire\/CO detection and 520 Hz support on both the addressable loop. Through the audio\/voice evacuation, Mircom’s FleX-Net takes you even farther into the future with expanded capabilities. It supports peer-to-peer network communications, the FX-2003-12NDS allows for a maximum of 63 nodes while providing reliability, flexibility and expandability.\u003c\/p\u003e\n\u003cp\u003eEach FleX-Net Compact Network Panel consists of one intelligent signalling line circuit (SLC) capable of supporting 159 analog Sensors and 159 addressable modules. In addition, the base panel includes Four Style Z\/Y (Class A\/B) Notification Appliance Circuits and an easy to read and use, large 4 x 20 back-lit alphanumeric LCD display.\u003c\/p\u003e\n\u003cp\u003eThe network configuration allows the FX-2003-12NDS control panel to be connected to a Mircom network to provide additional input circuits, visual zones, programmable notification appliance circuits, and relays. The network interface module allows the panels to communicate on a peer-to-peer network via a Proprietary Arcnet Network Communications protocol.\u003c\/p\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":47635569869024,"sku":"FX-2003-12NDS","price":2362.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-control-panels-default-title-mircom-fx-2003-12nds-networkable-intelligent-fire-alarm-control-38254259044576.jpg?v=1763286498"},{"product_id":"mircom-mix-4030-trimode-heat-detector-wo-isolation","title":"Mircom MIX-4030 TriMode Heat Detector WO Isolation","description":"\u003ch2\u003eMircom MIX-4030 4000 Series TriMode Heat Detector WO Isolation\u003c\/h2\u003e","brand":"Mircom","offers":[{"title":"Default Title","offer_id":47635572228320,"sku":"MIX-4030","price":93.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/mircom-heat-detectors-default-title-mircom-mix-4030-trimode-heat-detector-wo-isolation-38206412259552.jpg?v=1763286469"}],"url":"https:\/\/thefirealarmsupplier.com\/collections\/mircom.oembed?page=18","provider":"The Fire Alarm Supplier","version":"1.0","type":"link"}