{"title":"Fire-Lite","description":"\u003ch2\u003eFirelite Smoke Detectors, Control Panels and Addressable Devices\u003c\/h2\u003e\n\u003cp\u003eFire-Lite Alarms, part of Honeywell, makes non-proprietary fire alarm systems for small to medium buildings. That makes Fire-Lite systems a common fit for schools, hospitals and health care facilities, commercial complexes, retail spaces and government buildings.\u003c\/p\u003e\n\u003cp\u003eThis collection covers the Fire-Lite line from the panel to the field device. Control panels range from conventional units such as the MS-4 to addressable panels such as the ES-50X and ES-200X. Firelite smoke detectors include the SD365 addressable photoelectric detector, the SD365CO smoke and carbon monoxide detector and the H365 heat detector. Addressable monitor, dual monitor and relay modules connect conventional devices and outputs to the loop.\u003c\/p\u003e\n\u003cp\u003eThe ES-50X is a 50-point addressable panel and the ES-200X a 198-point panel, so the size of the building usually decides which one fits. Also included are dual action pull stations, serial annunciators, duct detectors, back boxes and replacement parts such as battery cables. If a Fire-Lite part you need is not listed, send the part number through our \u003ca href=\"\/pages\/request-a-quote\"\u003equote page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePopular Fire-Lite models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/fire-lite-sd365-addressable-smoke-detector\"\u003eFire-Lite SD365 Addressable Photoelectric Smoke Detector\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/fire-lite-sd365co-smoke-and-carbon-monoxide-detector\"\u003eFire-Lite SD365CO Smoke and Carbon Monoxide Detector\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/fire-lite-es-50x-addressable-fire-alarm-control-panel-50-point\"\u003eFire-Lite ES-50X 50-Point Addressable Control Panel\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/fire-lite-ms-4-fire-alarm-control-panel-4-zone\"\u003eFire-Lite MS-4 4-Zone Fire Alarm Control Panel\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/fire-lite-mmf-300-addressable-monitor-module\"\u003eFire-Lite MMF-300 Addressable Monitor Module\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/fire-lite-bg-12lx-dual-action-pull-station\"\u003eFire-Lite BG-12LX Addressable Pull Station\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"fire-lite-bg-12-dual-action-pull-station","title":"Fire-Lite BG-12 Dual Action Pull Station","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite BG-12\u003c\/strong\u003e (also written BG12 or Fire Lite BG 12) — non-coded, dual-action conventional manual fire alarm pull station with an SPST normally-open switch, screw terminal connections and a hex lock.\u003c\/p\u003e\n\u003cp\u003eThe BG-12 Series provides Fire•Lite fire alarm control panels, as well as other manufacturers’ controls, with a manual alarm initiating input signal. Dual action means the handle must be pushed in and then pulled down, a design that is easily operated yet resists false alarms when the station is bumped, shaken or jarred. Once latched in the down position the word ACTIVATED appears at the top in bright yellow and a portion of the handle protrudes at the bottom as a visible flag. The textured finger-hold area carries Braille text, and white arrows show the basic operating direction for non-English-speaking persons. Cover, backplate and operation handle are all molded of durable polycarbonate, with white lettering and trim in a red that matches System Sensor’s SpectrAlert Advance horn\/strobe series. The station can be opened for inspection and maintenance without initiating an alarm, and the words NORMAL and ACTIVATED are molded into the plastic next to the alarm switch inside. The BG-12 Series is designed to replace the Fire•Lite legacy BG-10 Series.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-coded, dual-action conventional manual pull station\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSwitch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSPST normally-open; switch contacts are normally open\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSwitch contact rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGold-plated; 0.25 A @ 30 VAC or VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLock\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHex lock (P\/N 17007, 9\/64\"); U.S. patented hex-lock needs only a quarter-turn to lock or unlock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTerminals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFour-position terminal strip molded into backplate with Phillips combination-head captive 8\/32 screws, backed out at the factory and ready to accept field wiring up to 12 AWG (3.1 mm²); terminal numbers molded into the backplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (pull station)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.5\" (13.97 cm) high × 4.121\" (10.47 cm) wide × 1.39\" (3.53 cm) deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (SB-10 backbox)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.5\" (13.97 cm) high × 4.121\" (10.47 cm) wide × 1.375\" (3.49 cm) deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (SB-I\/O backbox)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.601\" (14.23 cm) high × 4.222\" (10.72 cm) wide × 1.439\" (3.66 cm) deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSurface mount with SB-10 or SB-I\/O; semi-flush mount to a standard single-gang, double-gang or 4\" (10.16 cm) square electrical box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCover, backplate and operation handle molded of durable polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAccessibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeets ADA 5 lb. maximum pull-force; Braille text on the finger-hold area and across the top of the handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeets UL 38, Standard for Manually Actuated Signaling Boxes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency certifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eC(UL)US: S711; FM Approved; CSFM 7150-0075:184; MEA 67-02-E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConventional, not addressable:\u003c\/strong\u003e the BG-12 supplies a single dry contact closure to an initiating device circuit. It has no addressable interface, no address switches and no LED — the panel reports the zone, not the individual station. For point identification use the BG-12LX instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContact rating is small:\u003c\/strong\u003e the gold-plated contacts are rated 0.25 A @ 30 VAC or VDC. This is an initiating contact for an IDC, not a load-switching contact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHex lock on this model:\u003c\/strong\u003e the BG-12 ships with the hex lock (a 9\/64\" hex, P\/N 17007, quarter-turn; a \u003ca href=\"\/products\/fire-lite-17007-spare-hex-wrench\"\u003espare hex wrench\u003c\/a\u003e is sold separately). If your site standard is keyed stations, order the BG-12L instead; keys are P\/N 17003, set of two.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReset procedure:\u003c\/strong\u003e insert the key or hex, twist a quarter-turn, then open the front cover, which returns the spring-loaded handle. The alarm switch is then reset by hand or automatically by closing the front cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-gang mounting:\u003c\/strong\u003e the backplate is large enough to overlap a single-gang backbox cutout by 1\/2\" (1.27 cm). The optional BG12TR trim ring covers larger semi-flush openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor use:\u003c\/strong\u003e the standard BG-12 is not certified for outdoor use. The BG-12LOB carries an outdoor certification and includes an outdoor-certified backbox and sealing gasket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplacement\u003c\/h3\u003e\n\u003cp\u003eThe BG-12 Series is designed to replace the Fire•Lite legacy BG-10 Series.\u003c\/p\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-bg-12l-dual-action-pull-station\"\u003eBG-12L\u003c\/a\u003e\u003c\/strong\u003e — same as the BG-12 but with a key lock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBG-12S\u003c\/strong\u003e — single-action pull station with pigtail connections and hex lock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBG-12LX\u003c\/strong\u003e — addressable version with an interface module mounted inside; see data sheet DF-52013.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-bg-12la-dual-action-pull-station\"\u003eBG-12LA\u003c\/a\u003e\u003c\/strong\u003e — same as BG-12L with auxiliary contacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBG-12LPS\u003c\/strong\u003e — dual-action pull station with pre-signal option.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-bg-12lob-dual-action-pull-station\"\u003eBG-12LOB\u003c\/a\u003e \/ \u003ca href=\"\/products\/fire-lite-bg-12lo-dual-action-pull-station\"\u003eBG-12LO\u003c\/a\u003e\u003c\/strong\u003e — outdoor-use certified; the LOB includes the outdoor certified backbox and sealing gasket, the LO does not include a backbox.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBG-12LSP\u003c\/strong\u003e — English\/Spanish (FIRE\/FUEGO) labeling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSB-10 \/ SB-I\/O\u003c\/strong\u003e — metal and plastic surface-mount backboxes; BG12TR optional trim ring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms data sheet \"BG-12 Series Manual Fire Alarm Pull Stations,\" document DF-52004:A1 (04\/22\/08). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-DF_52004.pdf?v=1794294765\" target=\"_blank\" rel=\"noopener\"\u003eBG-12 Series Manual Fire Alarm Pull Stations — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the BG-12 addressable?\u003c\/strong\u003e\u003cbr\u003eNo. It is a conventional, non-coded station with an SPST normally-open switch for an initiating device circuit. For an addressable station use the BG-12LX.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it use a key or a hex lock?\u003c\/strong\u003e\u003cbr\u003eThe BG-12 has a hex lock (P\/N 17007, 9\/64 in.) that needs only a quarter-turn. The BG-12L is the key-lock version.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used outdoors?\u003c\/strong\u003e\u003cbr\u003eThe standard BG-12 is not for outdoor use. The BG-12LOB includes an outdoor backbox and sealing gasket; the BG-12LO does not include a backbox.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the BG-12 replace?\u003c\/strong\u003e\u003cbr\u003eThe BG-12 Series is designed to replace the Fire-Lite legacy BG-10 Series.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132750528736,"sku":"BG-12","price":44.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-pull-stations-default-title-fire-lite-bg-12-dual-action-pull-station-31896795971808.jpg?v=1793777039"},{"product_id":"fire-lite-rel-47k-bp-end-of-line-resistor","title":"Fire-Lite REL-47K-BP End Of Line Resistor, Pack of 10","description":"\u003ch2\u003eFire-Lite REL-47K-BP End Of Line Resistor, 47K With Leads, Pack of 10 Resistors\u003c\/h2\u003e\u003cdiv class=\"ths-mfr-data\"\u003e\n\u003cp\u003eThe REL-47K-BP is a bulk pack of ten 47 k-ohm end-of-line resistors with leads. End-of-line devices are installed at the last device on a supervised fire alarm circuit so the panel can monitor the wiring.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e47 k-ohm end-of-line resistor with leads\u003c\/li\u003e\n\u003cli\u003eBulk pack of 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatible With\u003c\/h3\u003e\n\u003cul\u003e\u003cli\u003eFire alarm circuits that specify a 47 k-ohm end-of-line resistor\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many resistors are in the pack?\u003c\/strong\u003e\u003cbr\u003eTen 47 kΩ end-of-line resistors, each with leads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere is an end-of-line resistor installed?\u003c\/strong\u003e\u003cbr\u003eAt the last device on a supervised initiating circuit, so the panel can monitor the circuit wiring.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132755050720,"sku":"REL-47K-BP","price":238.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-eol-resistors-default-title-fire-lite-rel-47k-bp-end-of-line-resistor-34210270642400.jpg?v=1793777729"},{"product_id":"fire-lite-sb-10-surface-mount-backbox","title":"Fire-Lite SB-10 Metal Surface Mount Backbox for BG-12 and BG-12LX Pull Stations","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite SB-10\u003c\/strong\u003e — metal surface-mount backbox for Fire-Lite BG-12 Series and BG-12LX manual pull stations.\u003c\/p\u003e\u003cp\u003eA BG-12 or BG-12LX semi-flush mounts into a single-gang, double-gang or 4 in. square electrical box. Where no box is available — masonry, exposed conduit, a retrofit — the station surface mounts onto a backbox instead, and SB-10 is the metal choice. It is an enclosure only, with no electronics or terminals.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMetal surface-mount backbox, listed by Fire-Lite as SB-10\u003c\/li\u003e\n\u003cli\u003e5.5 in. H × 4.121 in. W × 1.375 in. D (13.97 × 10.47 × 3.49 cm)\u003c\/li\u003e\n\u003cli\u003eAccepts the conventional BG-12 Series: BG-12, BG-12L, BG-12S, BG-12SL, BG-12LSP, BG-12LA, BG-12LPS\u003c\/li\u003e\n\u003cli\u003eAccepts the addressable BG-12LX, whose data sheet names SB-10 as its surface backbox\u003c\/li\u003e\n\u003cli\u003eHoneywell lists the same SB-10 in Gamewell-FCI MS-7 Series ordering information\u003c\/li\u003e\n\u003cli\u003eNot needed for semi-flush work, which uses the BG12TR trim ring instead\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDo not confuse it with SB-I\/O, the plastic indoor and outdoor box that ships with the BG-12LOB and measures 5.601 × 4.222 × 1.439 in.; with BG12TR, a trim ring and not a box; or with WP-10, named by Gamewell-FCI for MS-7LOB retrofits.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132755247328,"sku":"SB-10","price":16.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-backboxes-default-title-fire-lite-sb-10-surface-mount-backbox-31896787321056.jpg?v=1793782788"},{"product_id":"fire-lite-bg-12lx-dual-action-pull-station","title":"Fire-Lite BG-12LX Addressable Fire Alarm Pull Station","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite BG-12LX\u003c\/strong\u003e (BG12LX) — dual-action addressable manual pull station with the addressable interface mounted inside, for use on the SLC loop of Fire•Lite addressable fire alarm control panels.\u003c\/p\u003e\n\u003cp\u003eBecause the BG-12LX is addressable, the control panel can display the exact location of the activated manual station, leading fire personnel quickly to the alarm. Dual action means two motions are required to activate: push in, then pull down, which latches the handle in the down position and reveals the word ACTIVATED in bright yellow at the top of the handle. A built-in bicolor LED, visible through the handle, flashes in normal operation and latches steady red in alarm. Maintenance personnel can open the station for inspection and address setting without causing an alarm condition. The shell, door and handle are molded of durable polycarbonate with a textured finish, and Braille text is included on the handle. Ships with the key locking feature; certified for Canadian and non-Canadian applications.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual-action addressable manual pull station, addressable interface mounted inside\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNormal operating voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum SLC loop voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28.0 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum SLC standby current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e375 µA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum SLC alarm current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAddressing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo rotary decimal switches; 1–159 with breakaway tab removed for MS-9600 Series, 1–99 for MS-9200UDLS, 1–50 for MS-9050UD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTerminals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCaptive screw terminals, wire-ready; accepts up to 12 AWG (3.25 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSemi-flush to a standard single-gang, double-gang or 4\" (10.16 cm) square electrical box; surface mount with SB-10 or SB-I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eShell, door and handle molded of durable polycarbonate with textured finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9.6 oz. (272.15 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32°F to 120°F (0°C to 49°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRelative humidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10% to 93% (noncondensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnvironment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFor use indoors in a dry location\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAccessibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeets ADAAG controls and operating mechanisms guidelines (Section 4.1.3[13]); meets ADA requirement for 5 lb. maximum activation force\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeets UL 38, Standard for Manually Actuated Signaling Boxes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency certifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL\/ULC certified S711 (Canadian and non-Canadian applications); MEA 67-02-E; CSFM 7150-0075:0184; FM Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim ring:\u003c\/strong\u003e the optional BG12TR is usually needed for semi-flush mounting with 4\" (10.16 cm) square or double-gang boxes — not with single-gang boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAddress range is panel-dependent:\u003c\/strong\u003e 1–159 requires the breakaway tab to be removed and an MS-9600 Series panel; MS-9200UDLS accepts 1–99 and MS-9050UD accepts 1–50. Set the address to the range the connected panel supports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServicing without an alarm:\u003c\/strong\u003e the station can be opened for inspection and address setting without causing an alarm condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReset requires the key:\u003c\/strong\u003e unlock the station and pull the door open to reset the handle; closing the door automatically resets the switch. Replacement keys are P\/N 17003 (set of two).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e rated for indoor, dry locations only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThe BG-12LX is for Fire•Lite addressable control panels. For NOTIFIER intelligent panels, see the \u003ca href=\"\/products\/notifier-nbg-12lx-dual-action-addressable-pull-station\"\u003eNOTIFIER NBG-12LX\u003c\/a\u003e. Address range depends on the panel: 1-159 on MS-9600 Series, 1-99 on MS-9200UDLS, 1-50 on MS-9050UD.\u003c\/p\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-sb-10-surface-mount-backbox\"\u003eSB-10\u003c\/a\u003e\u003c\/strong\u003e — metal surface backbox for surface mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSB-I\/O\u003c\/strong\u003e — plastic surface backbox for surface mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-bg12tr-lexan-trim-ring\"\u003eBG12TR\u003c\/a\u003e\u003c\/strong\u003e — optional trim ring for semi-flush installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e17003\u003c\/strong\u003e — replacement keys, set of two.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms data sheet \"BG-12LX Addressable Manual Pull Station,\" document DF-52013:D (4\/13\/2012). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-df-52013.pdf?v=1794289766\" target=\"_blank\" rel=\"noopener\"\u003eBG-12LX — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-I56-3655-003.pdf?v=1794289768\" target=\"_blank\" rel=\"noopener\"\u003eBG-12LX Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich panels is the BG-12LX compatible with?\u003c\/strong\u003e\u003cbr\u003eFire-Lite states the BG-12LX is compatible with all Fire•Lite intelligent panels and provides one addressable alarm input on the SLC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it mounted?\u003c\/strong\u003e\u003cbr\u003eSemi-flush on a single-gang, double-gang or 4\" square electrical box, or surface mounted on an SB-10 or SB-I\/O backbox. The BG12TR trim ring is usually needed for semi-flush mounting on 4\" or double-gang boxes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I reset it after activation?\u003c\/strong\u003e\u003cbr\u003eUnlock the station with the key, open the door until the handle returns to normal, then close and lock the door; closing the door resets the switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the address set?\u003c\/strong\u003e\u003cbr\u003eTwo rotary decimal switches set the address: 1–159 on MS-9600 Series panels (breakaway tab removed), 1–99 on the MS-9200UDLS and 1–50 on the MS-9050UD.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132767502560,"sku":"BG-12LX","price":114.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-pull-stations-default-title-fire-lite-bg-12lx-dual-action-pull-station-32853233729760.jpg?v=1769701017"},{"product_id":"fire-lite-cmf-300-addressable-control-module","title":"Fire-Lite CMF-300 Addressable Control Module","description":"\u003ch2\u003eFire-Lite CMF-300 Addressable Control Module\u003c\/h2\u003e\n\u003cp\u003eCMF-300 addressable control modules provide Fire-Lite® alarms \u0026amp; intelligent control panels with a circuit for notification systems, such as horns and strobes.\u003c\/p\u003e\n\u003cp\u003eAddressability allows the CMF-300 addressable control modules \u0026amp; to be activated through panel programming, on a select (zone or area of coverage) basis.\u003c\/p\u003e\n\u003cp\u003eLiteSpeed™ is a communication protocol developed by Fire-Lite engineering that greatly enhances the speed of communication between analog intelligent devices. Intelligent devices communicate in a grouped fashion. \u003c\/p\u003e\n\u003cp\u003eIf one of the devices within the group has new information, the panel CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of other designs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInternal circuitry powered directly by 2-wire SLC loop\u003c\/li\u003e\n\u003cli\u003eIntegral LED blinks green each time it receives a communication and turns red when activated\u003c\/li\u003e\n\u003cli\u003eHigh noise immunity (EMF\/RFI)\u003c\/li\u003e\n\u003cli\u003eWide viewing angle of LED\u003c\/li\u003e\n\u003cli\u003eFace plate is made of heat-resistant plastic\u003c\/li\u003e\n\u003cli\u003eSEMS screws with clamping plates for wiring ease\u003c\/li\u003e\n\u003cli\u003eDirect-dial entry of address: 1– 159 for MS-9600 series panels, 1 to 99 on MS-9200UDLS, and MS-9050UD\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCertifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUL: S2424\u003c\/li\u003e\n\u003cli\u003eULC: CS3965\u003c\/li\u003e\n\u003cli\u003eFM Approved\u003c\/li\u003e\n\u003cli\u003eCSFM: 7300-0075:185\u003c\/li\u003e\n\u003cli\u003eMEA: 72-01-E\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThe CMF-300 uses the LiteSpeed protocol on the two-wire SLC loop.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-cmf-300-6-6-input-class-b-or-3-input-class-a\"\u003eFire-Lite CMF-300-6\u003c\/a\u003e: six-circuit version (Class B) or three-circuit (Class A).\u003c\/li\u003e\n\u003cli\u003eAddress range: 1 to 159 on MS-9600 series panels; 1 to 99 on the MS-9200UDLS and MS-9050UD.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the CMF-300 need a separate power supply for its own circuitry?\u003c\/strong\u003e\u003cbr\u003eNo. Its internal circuitry is powered directly by the two-wire SLC loop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I set the CMF-300 address?\u003c\/strong\u003e\u003cbr\u003eDirect-dial entry of the address: 1 to 159 for MS-9600 series panels, 1 to 99 on MS-9200UDLS and MS-9050UD.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-df-52130.pdf?v=1794318914\" target=\"_blank\" rel=\"noopener\"\u003eCMF-300(A) Addressable Control Module — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-I56-3650.pdf?v=1794318919\" target=\"_blank\" rel=\"noopener\"\u003eCMF-300 Control Module Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132767535328,"sku":"CMF-300","price":97.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-modules-default-title-fire-lite-cmf-300-addressable-control-module-33035974344928.jpg?v=1793777949"},{"product_id":"fire-lite-crf-300-addressable-relay-module","title":"Fire-Lite CRF-300 Addressable Relay Module","description":"\u003cp\u003e\u003cstrong\u003eCRF-300\u003c\/strong\u003e — addressable relay module that gives a Fire•Lite intelligent control panel a dry-contact output for activating auxiliary devices such as fans, door holders, dampers and control equipment.\u003c\/p\u003e\n\u003cp\u003eAddressability allows the dry contact to be activated through panel programming on a select basis. The module provides two Form-C dry contacts that switch together, and both the internal circuitry and the relay are powered directly by the two-wire SLC loop — no separate supply is needed to drive the relay itself. Built-in type identification automatically identifies the device to the control panel, and a built-in type code (not settable) differentiates a relay module from a control module. An integral LED blinks green each time a communication is received from the control panel and turns steady red when the module is activated. Typical applications include operating dry contacts for door holders and air handling unit shutdown, and resetting four-wire smoke detector power. The face plate is off-white heat-resistant plastic, and SEMS screws with clamping plates ease wiring.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eContacts\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo Form-C dry contacts that switch together\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNormal operating voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 to 32 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum SLC current draw\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.5 mA (LED on)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAverage operating current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e230 µA direct poll (CLIP mode); 255 µA group poll (LiteSpeed mode) with LED flashing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower source\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInternal circuitry and relay powered directly by the two-wire SLC loop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAddressing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo rotary switches, direct-dial entry: 01–159 for MS-9600(A) series panels; 01–99 on MS-9200UDLS(A) and MS-9050UD(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEOL resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot used\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eContact rating — resistive, non-coded\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.0 A @ 30 VDC; 0.9 A @ 110 VDC; 0.9 A @ 125 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eContact rating — resistive, coded\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.0 A @ 30 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eContact rating — inductive, coded\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 A @ 30 VDC (L\/R = 5 ms); 1.0 A @ 30 VDC (L\/R = 2 ms)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eContact rating — inductive, non-coded\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 A @ 125 VAC (PF = 0.35)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32°F to 120°F (0°C to 49°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHumidity range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10% to 93% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5\" (11.43 cm) high × 4\" (10.16 cm) wide × 1.25\" (3.175 cm) deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMounts to a 4\" (10.16 cm) square × 2.125\" (5.398 cm) deep box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOff-white heat-resistant plastic face plate; SEMS screws with clamping plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency certifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL: S2424; ULC: S2424; FM approved; CSFM 7300-0075:185; MEA 72-01-E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo supervision on the output:\u003c\/strong\u003e open\/short supervision is suspended with the CRF-300 and EOL resistance is not used. If you need a supervised output circuit, this is the wrong module — use a control module instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDerate for inductive loads:\u003c\/strong\u003e the headline 3.0 A rating is resistive, non-coded, at 30 VDC. Inductive coded loads at 30 VDC drop to 0.5 A (L\/R = 5 ms), and inductive 125 VAC at PF 0.35 drops to 0.5 A. Fans, dampers and door holders are inductive — size against the inductive column, not the resistive one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelay power:\u003c\/strong\u003e the relay is driven from the SLC loop itself, so no external 24 VDC is required to operate the contacts. External loads still need their own supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAddress before or after mounting:\u003c\/strong\u003e the two rotary switches may be set either way, and the address range depends on the connected panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface mounting:\u003c\/strong\u003e use the optional SMB500 surface-mount backbox.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocumentation:\u003c\/strong\u003e for installation instructions see document I56-1190-005 and refer to the SLC Wiring Manual, document 51309.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMF-300\u003c\/strong\u003e — addressable control module rather than a relay: it switches 24 VDC notification appliance power on a single Class B (Style Y) or Class A (Style Z) circuit, uses a 47K ohm EOL resistor, and requires external 24 VDC to power the appliances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCRF-300A\u003c\/strong\u003e — ULC certified version of the relay module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCRF-300-6\u003c\/strong\u003e — six-relay control module with Form-C relays; mounts one or two modules in a BB-2F cabinet, or up to six on a CHS-6 chassis in a BB-6F cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMB500\u003c\/strong\u003e — optional surface-mount backbox.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms data sheet \"CRF-300(A) Relay Module,\" document df-60379:A1 (08\/04\/09). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-df-60379.pdf?v=1794291311\" target=\"_blank\" rel=\"noopener\"\u003eCRF-300(A) Relay Module — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the CRF-300 switch?\u003c\/strong\u003e\u003cbr\u003eIt provides two Form-C dry contacts that switch together, used for door holders, air handling unit shutdown, fans, dampers and resetting four-wire smoke detector power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the contact ratings?\u003c\/strong\u003e\u003cbr\u003eResistive non-coded loads are rated 3.0 A at 30 VDC and 0.9 A at 125 VAC; inductive loads are rated lower (for example 0.5 A at 125 VAC, PF 0.35).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich panels and addresses does it support?\u003c\/strong\u003e\u003cbr\u003eAddresses 01 to 159 on MS-9600(A) series panels and 01 to 99 on the MS-9200UDLS(A) and MS-9050UD(A), set with two rotary switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the relay output supervised?\u003c\/strong\u003e\u003cbr\u003eNo. Open\/short supervision is suspended with the CRF-300, so the contacts are not supervised.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132767568096,"sku":"CRF-300","price":103.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-relay-modules-default-title-fire-lite-crf-300-addressable-relay-module-33035974377696.jpg?v=1793777024"},{"product_id":"fire-lite-d355pl-duct-smoke-detector-replaced-by-d365pl","title":"Fire-Lite D355PL Duct Smoke Detector (Replaced by D365PL)","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite D355PL\u003c\/strong\u003e — InnovairFlex intelligent non-relay photoelectric low-flow duct smoke detector housing, supplied with the SD355R remote-test-capable sensor head.\u003c\/p\u003e\u003cp\u003eThe pivoting housing fits either a square or a rectangular footprint and mounts to round or rectangular duct. It draws communication line power only, and a cover tamper feature reports a removed or badly seated cover as a trouble at the panel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAir velocity 100 to 4,000 ft\/min (0.5 to 20.32 m\/s)\u003c\/li\u003e\n\u003cli\u003eOperating temperature -4°F to 158°F (-20°C to 70°C); humidity 0 to 95 percent non-condensing\u003c\/li\u003e\n\u003cli\u003eRectangular footprint 14.38 × 5 × 2.5 in.; square 7.75 × 9 × 2.5 in.\u003c\/li\u003e\n\u003cli\u003eWeight 1.6 lb (0.73 kg), with a 3\/4 in. conduit knockout\u003c\/li\u003e\n\u003cli\u003eUL and ULC S1059, CSFM 3240-0075:0221, FM approved\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDNRW is the NEMA-4 watertight version of the same housing and ships without a head. D365PL is the later housing, carrying the SD365R(A)-IV head that Fire-Lite lists as replacing the SD355R supplied here. The CRF-300 relay module, DST sampling tubes and the RTS151 remote test station are ordered separately.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-df-60430.pdf?v=1794324010\" target=\"_blank\" rel=\"noopener\"\u003eD355PL(A)\/DNRW InnovairFlex Duct Smoke Detector — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-I56-3255.pdf?v=1794324013\" target=\"_blank\" rel=\"noopener\"\u003eD355PL Installation and Maintenance Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the sensor head included?\u003c\/strong\u003e\u003cbr\u003eYes. The D355PL ships with the SD355R remote-test-capable sensor head factory installed. The sampling tube is not included and must be ordered to suit the duct width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat replaces the D355PL?\u003c\/strong\u003e\u003cbr\u003eThe D365PL duct smoke detector is the replacement for the D355PL.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it need a separate 24 VDC supply?\u003c\/strong\u003e\u003cbr\u003eNo. The D355PL requires communication line power only. Units with date code 0013 or higher also do not need external 24 VDC for remote test when used with a remote-test-capable detector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it control fans or dampers?\u003c\/strong\u003e\u003cbr\u003eYes, with the CRF-300 addressable relay module, sold separately, which mounts inside the housing for applications requiring a Form-C relay.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132767863008,"sku":"D355PL","price":247.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-duct-detectors-default-title-fire-lite-d355pl-duct-smoke-detector-replaced-by-d365pl-31896799183072.jpg?v=1793777915"},{"product_id":"fire-lite-mdf-300-dual-monitor-module","title":"Fire-Lite MDF-300 Addressable Dual Monitor Module, Two Class B Initiating Device Circuits","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite MDF-300\u003c\/strong\u003e — addressable dual monitor module giving two independent Class B initiating device circuits from one module.\u003c\/p\u003e\u003cp\u003eIt supervises two separate circuits of normally open contact fire alarm and supervisory devices, such as pull stations, waterflow switches or four wire smoke detector zones, and reports each to the panel as its own point.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo independent two wire Style B (Class B) circuits at two separate, consecutive addresses\u003c\/li\u003e\n\u003cli\u003eTerminals 6 and 7 use the first address, terminals 8 and 9 the next; the ones digit of the set address must be 0, 2, 4, 6 or 8\u003c\/li\u003e\n\u003cli\u003eStyle D (Class A) circuits are not supported in any application\u003c\/li\u003e\n\u003cli\u003e47 kΩ end-of-line resistors supplied; maximum circuit wiring resistance 1,500 Ω\u003c\/li\u003e\n\u003cli\u003e15 to 32 VDC from the loop; average operating current 750 µA with the LED flashing\u003c\/li\u003e\n\u003cli\u003e4.5 in. high by 4 in. wide by 1.25 in. deep; mounts to a 4 in. square box 2.125 in. deep or the SMB500\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMMF-300 is the single circuit monitor module and does support Class A. MMF-302 monitors two wire smoke detectors on a 3.9 kΩ resistor rather than 47 kΩ.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the MDF-300 support Class A circuits?\u003c\/strong\u003e\u003cbr\u003eNo. It supervises two Class B (Style B) circuits of dry-contact input devices. Use the MMF-300 for a Class A (Style D) circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many addresses does it use?\u003c\/strong\u003e\u003cbr\u003eTwo. Each of its two initiating device circuits reports to the panel as its own point at consecutive addresses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat end-of-line resistor is used?\u003c\/strong\u003e\u003cbr\u003eA 47K ohm end-of-line resistor terminates each Class B circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it monitor two-wire smoke detectors?\u003c\/strong\u003e\u003cbr\u003eNo. It monitors dry-contact devices; the MMF-302 interface module is the Fire-Lite module for compatible two-wire 24 V smoke detectors.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132768026848,"sku":"MDF-300","price":152.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-monitor-modules-default-title-fire-lite-mdf-300-dual-monitor-module-34200207982816.jpg?v=1793777243"},{"product_id":"fire-lite-mmf-300-addressable-monitor-module","title":"Fire-Lite MMF-300 Addressable Monitor Module","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite MMF-300\u003c\/strong\u003e — addressable monitor module for one zone of normally-open dry-contact initiating devices, for use on the SLC of Fire•Lite intelligent addressable fire alarm control panels.\u003c\/p\u003e\n\u003cp\u003eThe MMF-300 is the full-size monitor module in the Fire•Lite addressable range. It mounts in a standard 4.0\" (10.16 cm) box and ships with a plastic cover plate and an end-of-line resistor. Unlike the miniature MMF-301, the MMF-300 includes an LED and can be configured for either a Class B or a Class A initiating device circuit, which is what makes it the module of choice where the IDC wiring must be Class A or where a local polling indication is wanted at the module. It supervises a circuit of normally-open dry-contact devices such as conventional heat detectors, pull stations, waterflow switches and tamper switches, and reports that circuit’s status to the panel under its own address.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAddressable monitor module for one zone of normally-open dry-contact initiating devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIDC configuration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMay be configured for either a Class B or a Class A IDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIndication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIncludes an LED (the miniature MMF-301 excludes it)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAddressing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRotary switches for addressing; device capacity is panel dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMounts in a standard 4.0\" (10.16 cm) box; surface mount using the SMB500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupplied with\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlastic cover plate and end-of-line resistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnd-of-line resistor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e47k ohm assembly (R-47K), included with the module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWiring\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eConnects with screw terminals (the MMF-301 connects with wire pigtails instead)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not substitute the MMF-301:\u003c\/strong\u003e the miniature MMF-301 excludes the LED and the Class A option and connects with wire pigtails. If the drawings call for a Class A IDC or a module LED, only the full-size MMF-300 will do.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface mounting:\u003c\/strong\u003e the SMB500 is used to mount all modules except the MMF-301 and M301, so it is the correct surface backbox for the MMF-300.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd-of-line resistor:\u003c\/strong\u003e the 47k ohm assembly supervises the MMF-300 module circuit and is included with each module — do not fit the 3.9k ohm assembly, which belongs to the MMF-302.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry contacts only:\u003c\/strong\u003e this module monitors normally-open dry-contact devices. To monitor a zone of conventional two-wire smoke detectors, use the MMF-302, which requires resettable 24 VDC power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox depth:\u003c\/strong\u003e plan for a standard 4.0\" square box; confirm depth against the module installation sheet before rough-in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMF-301\u003c\/strong\u003e — miniature version of the MMF-300. Excludes the LED and the Class A option, connects with wire pigtails, and may mount inside a device backbox.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMDF-300\u003c\/strong\u003e — dual monitor module; the same as the MMF-300 except that it provides two Class B-only IDCs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMF-302\u003c\/strong\u003e — similar to the MMF-300 but monitors one zone of conventional two-wire detectors; requires resettable 24 VDC power and is supervised by a 3.9k ohm end-of-line assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMF-300-10\u003c\/strong\u003e — ten-input monitor module; mounts one or two modules in a BB-2F cabinet, or up to six on a CHS-6 chassis in a BB-6F cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMF-300A\u003c\/strong\u003e — Canadian version of the module.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eUse the MMF-300 where a Class A IDC or a local LED is needed. The miniature \u003ca href=\"\/products\/fire-lite-mmf-301-addressable-mini-monitor-module\"\u003eMMF-301\u003c\/a\u003e has no LED or Class A option, and the \u003ca href=\"\/products\/fire-lite-mmf-302-addressable-monitor-module\"\u003eMMF-302\u003c\/a\u003e monitors conventional two-wire smoke detectors. The MMF-300A is the Canadian version.\u003c\/p\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the MMF-300 include an end-of-line resistor?\u003c\/strong\u003e\u003cbr\u003eYes. A 47k ohm assembly (R-47K) is included with the module.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat box does it mount in?\u003c\/strong\u003e\u003cbr\u003eA standard 4.0 inch box; use the SMB500 for surface mounting.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms data sheet \"ES-200X Series Intelligent Addressable Fire Alarm Control Panels,\" document DF-60957:F (5\/28\/2025), which lists the MMF-300(A) module and its accessories. Detailed electrical ratings are published in the MMF-300 Series data sheet DF-52121, which was not retrievable from the manufacturer at the time of writing and has therefore been omitted here rather than reproduced from a secondary source. Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132768354528,"sku":"MMF-300","price":78.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-monitor-modules-default-title-fire-lite-mmf-300-addressable-monitor-module-33036064030944.jpg?v=1793777084"},{"product_id":"fire-lite-sd365-addressable-smoke-detector","title":"Fire-Lite SD365 Addressable Photoelectric Smoke Detector","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite SD365\u003c\/strong\u003e is a white, low-profile intelligent plug-in photoelectric smoke detector for Fire-Lite addressable fire alarm control panels. It operates in LiteSpeed protocol only and is addressed with rotary decimal switches. The SD365 Series is a direct replacement for the SD355 Series.\u003c\/p\u003e\n\u003cp\u003eAn enhanced optical sensing chamber detects smoke from a wide range of combustion sources and is designed to meet UL 268 7th Edition. Point ID addressing gives responders the exact detector location. Two LEDs blink when the panel polls the unit and latch on in alarm. The cover and insect-resistant screen come off for field cleaning, and a built-in functional test switch is operated with an external magnet. Sensitivity can be tested from the panel as required by NFPA 72.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSD365 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLiteSpeed only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL: 0.5% to 4.0% per foot obscuration; ULC: 0.5% to 3.5% per foot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFactory preset\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5% nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 - 32 volts DC peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandby current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 µA @ 24 VDC (one communication every 5 seconds, LED enabled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 mA @ 24 VDC (“ON”)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32°F to 122°F (0°C to 50°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHumidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10% - 93% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertified velocity range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 - 4000 ft\/min, suitable for installation in ducts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.0″ high; B300-6 base 6.1″ diameter, B501 base 4″\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 oz. (95 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL\/ULC S1059; FM Approved; CSFM 7272-0075:0502\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpacing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 feet in low airflow with smooth ceiling, per NFPA 72\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiteSpeed only:\u003c\/strong\u003e the white SD365 is not the correct part if the loop must run CLIP. The ivory version, \u003ca href=\"\/products\/fire-lite-sd365-iv-addressable-smoke-detector-ivory\"\u003eSD365-IV\u003c\/a\u003e, operates in both CLIP and LiteSpeed modes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces SD355:\u003c\/strong\u003e the SD365 is a direct replacement for the SD355 Series, and the separate base allows interchange of photoelectric, ionization and thermal sensors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo end-of-line resistors:\u003c\/strong\u003e the SLC loop is supervised. T-taps are permitted for Style 4 (Class B) wiring only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBases:\u003c\/strong\u003e B300-6 (6″) and B501 (4″); relay, isolator and sounder bases are also available. See installation sheet I56-3626 for device limits between isolator modules and isolator bases.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-sd365t-addressable-smoke-and-thermal-detector\"\u003eSD365T\u003c\/a\u003e - white, adds a 135°F (57°C) fixed-temperature thermal device; 32°F to 100°F operating range\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-sd365r-photoelectric-smoke-detector\"\u003eSD365R\u003c\/a\u003e - white, remote test capable, for DNR\/DNRW duct smoke detector housings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSD365A\u003c\/strong\u003e - same as SD365 but with ULC certification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications from the Fire•Lite Alarms data sheet “SD365 Series Addressable Photoelectric Smoke Detectors,” DF-61010:B (2019). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-I56-6523.pdf?v=1794289784\" target=\"_blank\" rel=\"noopener\"\u003eSD365 \/ SD365-IV Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the SD365 include a base?\u003c\/strong\u003e\u003cbr\u003eNo. The sensor base is supplied separately; the SD365 installs in a B300-6 (6.2 in. diameter installed) or B501 (4.1 in.) base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill the SD365 work on a CLIP loop?\u003c\/strong\u003e\u003cbr\u003eNo. The white SD365 supports LiteSpeed protocol only. The ivory SD365-IV supports either LiteSpeed or CLIP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used in a duct?\u003c\/strong\u003e\u003cbr\u003eYes. The SD365 is UL 268A certified for duct applications with an air velocity rating of 0 to 4000 ft\/min, and intelligent photoelectric sensors are also certified for use inside DNR(W) duct housings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SD365 tested?\u003c\/strong\u003e\u003cbr\u003eA test magnet (M02-04-01 or M02-09-00) simulates smoke for a functional test, sensitivity readings are available through the panel, and approved canned smoke agents can be used for smoke entry testing.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132796960992,"sku":"SD365","price":86.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-smoke-detectors-default-title-fire-lite-sd365-addressable-smoke-detector-34894000980192.jpg?v=1793776919"},{"product_id":"fire-lite-es-200x-addressable-fire-control-panel-198-point","title":"Fire-Lite ES-200X Addressable Fire Alarm Control Panel 198 Point","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite ES-200X\u003c\/strong\u003e (also written Firelite ES200X) — intelligent addressable fire alarm control panel with one signaling line circuit, 198-point capacity and a pre-installed IPOTS-COM dual-technology (IP and POTS) central station communicator.\u003c\/p\u003e\n\u003cp\u003eThe ES-200X is a direct replacement for the MS-9200UDLS and programs just like Fire•Lite’s other addressable products, yet fits into applications previously served only by conventional panels. Its single SLC (DCL) loop carries up to 198 addressable devices — 99 detectors and 99 modules — meets NFPA Class B and Class A requirements, and runs up to 10,000 ft. (3,000 m) in LiteSpeed mode over twisted, unshielded wire. Four independently programmable NAC output circuits can each be configured Class A or Class B, with selectable strobe synchronization per NAC for System Sensor, Wheelock and Gentex appliances. The panel supports automated activation of the ECC-50\/100 Emergency Command Center and the ECC-FFT firefighter telephone option, and is certified for seismic applications when used with the appropriate seismic mounting kit. The ES-200X ships as the main circuit board with display, pre-installed communicator, chassis with transformer, backbox with door, and a plastic bag containing screws, cables and key.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntelligent signaling line circuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1; meets NFPA Class B and Class A requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAddressable device capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e198 (99 addressable detectors and 99 modules)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProgrammable software zones\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAnnunciators\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16 (up to 8 per ANN-BUS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSLC protocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLiteSpeed and CLIP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSLC wire run\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 10,000 ft. (3,000 m) in LiteSpeed mode, twisted unshielded wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotification appliance circuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTerminal block provides connections for four NACs, Class B or Class A; special application power; power-limited, supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum signaling current per NAC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 A special application; 250 mA regulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal 24 VDC system power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.7 A maximum, shared between all NAC circuits and the ANN-BUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNAC end-of-line resistor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7k ohm, ½ watt (P\/N 71252 UL certified) for Class B NAC; system capable of 1.9k–22k ohm ELR range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRelays\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo programmable Form-C relays and one fixed trouble relay; 2.0 A @ 30 VDC (resistive), 0.5 A @ 30 VAC (resistive); non-power-limited, non-supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAC power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 or 240 VAC, 50\/60 Hz, 3.25 A, auto-sensing (no switch required); minimum 14 AWG (2.00 mm²) with 600 V insulation; non-power-limited, supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 12 V 18 AH lead-acid; charger capacity 7–18 AH; cabinet holds a maximum of two 18 AH batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegral 80-character LCD with backlighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHistory file\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 events\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBackbox\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.00\" (48.26 cm) H × 16.65\" (42.29 cm) W × 5.25\" (13.34 cm) D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDoor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.26\" (48.92 cm) H × 16.82\" (42.73 cm) W × 0.72\" (1.82 cm) D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26.9 lbs. (12.20 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating environment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0–49°C \/ 32–120°F, relative humidity 93% ± 2% RH (noncondensing) at 32°C ± 2°C (90°F ± 3°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCertified to UL Standard 864, 10th edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeismic\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIBC 2021, IBC 2018, IBC 2015, IBC 2012, IBC 2009; CBC 2019\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency certifications (ES-200X)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL: S624; FM approved; CSFM 7165-0075:0500; FDNY COA #2023-TMCOAP-001919-RENL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower budget:\u003c\/strong\u003e 2.5 A is the per-circuit maximum. Maximum or total 24 VDC system power shared between all NAC circuits and the ANN-BUS is 2.7 A — four circuits do not give you four times 2.5 A. Add the PWRMOD24 power expander module to increase alarm power output to 6 amps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDress panel:\u003c\/strong\u003e the ES-200X carton does not list a dress panel (the ES-200XC, ES-200XI and ES-200XP do). Order DP-ES-R separately; TR-CE is the trim ring for semi-flush mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBatteries:\u003c\/strong\u003e the cabinet holds a maximum of two 18 AH batteries and the onboard charger covers 7–18 AH. Batteries larger than 18 AH require a CHG-75 or CHG-120F and an external BB-26 or BB-55F enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeismic installations:\u003c\/strong\u003e use SEISKIT-COMMENC, the seismic kit for the ES-200X Series backbox, which includes a battery bracket for two 7, 12 or 18 AH batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegacy devices:\u003c\/strong\u003e 300 Series devices such as CP300\/CP350, SD300(T)\/SD350(T), M300, M301, M302, C304 and BG-10LX are not compatible with LiteSpeed polling; if any are on the SLC, polling must be set to standard CLIP protocol.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgramming:\u003c\/strong\u003e databases upload and download through the panel USB port, or over ethernet using the IPOTS-COM. Offline programming with FS-Tools requires an ethernet connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReplacement\u003c\/h3\u003e\n\u003cp\u003eThe ES-200X is the direct replacement for the Fire-Lite MS-9200UDLS panel. It keeps the one-loop, 198-point layout and adds four NAC circuits that can each be set to Class A or Class B, a 10,000 ft. LiteSpeed wire run and a pre-installed IPOTS-COM communicator. See the \u003ca href=\"\/products\/fire-lite-ms-9200udls\"\u003eMS-9200UDLS\u003c\/a\u003e page if you are matching an existing installation.\u003c\/p\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-es-200xc\"\u003eES-200XC\u003c\/a\u003e\u003c\/strong\u003e — same panel and pre-installed IPOTS-COM, with a dress panel included in the carton.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-es-200xi\"\u003eES-200XI\u003c\/a\u003e\u003c\/strong\u003e — no communicator fitted; dress panel included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-es-200xp-addressable-fire-alarm-control-panel\"\u003eES-200XP\u003c\/a\u003e\u003c\/strong\u003e — integrated CLSS Pathway Pro dual-SIM (AT\u0026amp;T\/Verizon) 5G LTE-M communicator in place of the IPOTS-COM; adds ETL 5017286 and CSFM 7165-0075:0511.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-ms-9200udls\"\u003eMS-9200UDLS\u003c\/a\u003e\u003c\/strong\u003e — the legacy panel the ES-200X Series directly replaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms data sheet \"ES-200X Series Intelligent Addressable Fire Alarm Control Panels,\" document DF-60957:F (5\/28\/2025). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-DF-60957_ES-200X.pdf?v=1794290544\" target=\"_blank\" rel=\"noopener\"\u003eES-200X Series — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-LS10131-000FL-E_ES-200X.pdf?v=1794290547\" target=\"_blank\" rel=\"noopener\"\u003eES-200X \/ ES-200XC Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the ES-200X replace the MS-9200UDLS?\u003c\/strong\u003e\u003cbr\u003eYes. Fire-Lite describes the ES-200X as a direct replacement for the MS-9200UDLS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many devices does the ES-200X support?\u003c\/strong\u003e\u003cbr\u003eOne SLC loop with up to 198 addressable devices: 99 detectors and 99 modules.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a communicator included?\u003c\/strong\u003e\u003cbr\u003eYes. The panel ships with a pre-installed IPOTS-COM, a dual-technology (IP and POTS) central station communicator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat batteries does it take?\u003c\/strong\u003e\u003cbr\u003eTwo 12 V lead-acid batteries. The charger handles 7 to 18 AH, and the cabinet holds a maximum of two 18 AH batteries.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132798042336,"sku":"ES-200X","price":1310.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-control-panels-default-title-fire-lite-es-200x-addressable-fire-control-panel-198-point-31896797839584.jpg?v=1793777358"},{"product_id":"fire-lite-mmf-301-addressable-mini-monitor-module","title":"Fire-Lite MMF-301 Addressable Mini-Monitor Module","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite MMF-301\u003c\/strong\u003e — an addressable miniature monitor module that provides one two-wire Style B (Class B) initiating device circuit for normally open dry-contact devices. At 1.3″ H × 2.75″ W × 0.65″ D it is small enough to be installed in a single-gang junction box directly behind the unit it monitors.\u003c\/p\u003e\n\u003cp\u003eThe MMF-301 is intended for use in intelligent, two-wire systems where the individual address of each module is selected using rotary switches. It provides a two-wire initiating circuit for normally open contact fire alarm and security devices — typically a single device or a zone of dry contacts such as manual pull stations, waterflow switches, or the contacts of four-wire detectors. Its small size and light weight allow it to be installed without rigid mounting. The module connects by wire pigtails rather than terminal screws: red (+) and black (−) to the positive and negative loop power leads of the Signaling Line Circuit, and violet (+) and yellow (−) to the two-wire normally open initiating loop. The required 47K end-of-line resistor (ELR-47k) is included, and the module can be used to replace an M301 module in existing systems.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMMF-301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAddressable miniature monitor module, one two-wire Class B (Style B) IDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNominal operating voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15–32 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAverage operating current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e375 µA (group poll); 350 µA (direct poll)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 µA (communicating, IDC shorted)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEOL resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e47K ohms (ELR-47k included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum IDC resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,500 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum IDC voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11 volts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum IDC current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e450 µA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAddressing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRotary switches (tens and ones)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWire pigtails; 6″ minimum wire length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32°F to 120°F (0°C to 49°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHumidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10% to 93% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.3″ H × 2.75″ W × 0.65″ D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo LED and no Class A option:\u003c\/strong\u003e the MMF-301 is the miniature version of the MMF-300 and excludes the LED and the Class A option. Do not specify it where a local visible indicator or a Class A initiating circuit is required — use the full-size MMF-300 instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePigtails, not terminal screws:\u003c\/strong\u003e the module is wired by coloured wire leads and is intended to be wired and mounted without rigid connections inside a standard electrical box. Allow at least 6″ of wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd-of-line resistor:\u003c\/strong\u003e install the specified 47K EOL resistor to terminate the initiating loop; the ELR-47k ships with the module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit limit:\u003c\/strong\u003e maximum initiating device circuit resistance is 1,500 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo surface box:\u003c\/strong\u003e the SMB500 surface mount box is used for all Fire-Lite modules \u003cem\u003eexcept\u003c\/em\u003e the MMF-301 and M301.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e to ensure proper operation, connect this module only to listed compatible system control panels. Available address range is panel dependent — refer to the panel manual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBefore installing:\u003c\/strong\u003e if the module is added to an existing operational system, inform the operator and the local authority that the system will be temporarily out of service, and disconnect power to the control panel before installing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMF-300\u003c\/strong\u003e — full-size addressable monitor module for one zone of normally open dry-contact initiating devices; mounts in a standard 4.0″ box and may be configured for either a Class B or Class A IDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMDF-300\u003c\/strong\u003e — dual monitor module; same as the MMF-300 except it provides two Class B-only IDCs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMF-302\u003c\/strong\u003e — addressable monitor module for one zone of conventional two-wire detectors; requires resettable 24 VDC power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMMF-300-10\u003c\/strong\u003e — ten-input monitor module for cabinet mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM301\u003c\/strong\u003e — the legacy module the MMF-301 replaces in existing systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms installation and maintenance instructions “MMF-301 Monitor Module,” document I56-3654-002, with model positioning from the Fire•Lite data sheet “ES-50X Series Intelligent Addressable Fire Alarm Control Panels,” document DF-60953:D (3\/27\/2023). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-I56-3654-002.pdf?v=1794292586\" target=\"_blank\" rel=\"noopener\"\u003eMMF-301 Monitor Module Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan the MMF-301 replace an M301 module?\u003c\/strong\u003e\u003cbr\u003eYes. Fire-Lite states the MMF-301 can be used to replace an M301 module in existing systems.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the end-of-line resistor included?\u003c\/strong\u003e\u003cbr\u003eYes. The 47K ohm ELR-47k resistor is included to terminate the initiating loop.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is it wired?\u003c\/strong\u003e\u003cbr\u003eRed (+) and black (−) leads connect to the SLC loop, and violet (+) and yellow (−) leads connect to a two-wire, normally open initiating loop. Allow at least 6 in of wire.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere can it be mounted?\u003c\/strong\u003e\u003cbr\u003eIn a single-gang junction box directly behind the monitored unit. Its small size and light weight allow installation without rigid mounting.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132803088608,"sku":"MMF-301","price":66.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/MMF-301__REP1.jpg?v=1794753782"},{"product_id":"fire-lite-4xlmf-remote-annunciator-driver","title":"Fire-Lite 4XLMF Remote Annunciator Driver","description":"\u003ch2\u003eFire-Lite 4XLMF Remote Annunciator Driver, 24 Volt, Supports Gwsan-404, Flex 404 Only\u003c\/h2\u003e\u003cdiv class=\"ths-mfr-data\"\u003e\n\u003cp\u003e4XLMF: LED Interface Module for RZA-4XF Remote Annunciator Module\u003c\/p\u003e\n\u003cp\u003eThe 4XLM LED Interface Module supports the RZA-4X remote annunciator module.\u003c\/p\u003e\n\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/cs-2404.pdf\" target=\"_blank\" rel=\"noopener\"\u003eFlex 404 Fire Alarm Control Panel Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/df-51078.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMRP-4424 Agent Release Control Panel Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/df-51195.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMS-4412B \u0026amp; 4424B Fire Alarm Control Panels Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/df-51069.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMicroScan-4424 Fire Alarm Control Panel Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/manuals-and-guides\/user-manuals\/52193.pdf\" target=\"_blank\" rel=\"noopener\"\u003eFlex 402-Flex 404 Fire Alarm Control Panel Operating Instructions\u003c\/a\u003e (User Manual)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/manuals-and-guides\/user-manuals\/15153.pdf\" target=\"_blank\" rel=\"noopener\"\u003eFire Alarm Control Panel MS-4424 Instruction Manual\u003c\/a\u003e (User Manual)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/manuals-and-guides\/user-manuals\/15180.pdf\" target=\"_blank\" rel=\"noopener\"\u003eAgent Release Control Panel MRP-4424-Instruction Manual\u003c\/a\u003e (User Manual)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132847128800,"sku":"4XLMF","price":113.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-annunciators-default-title-fire-lite-4xlmf-remote-annunciator-driver-31896788664544.jpg?v=1793777392"},{"product_id":"fire-lite-bb-26-battery-backbox","title":"Fire-Lite BB-26 Battery Backbox","description":"\u003ch2\u003eFire-Lite BB-26 Battery Backbox - Mounts Up to 2, BAT-12260 Batteries\u003c\/h2\u003e\u003cdiv class=\"ths-mfr-data\"\u003e\n\u003cp\u003eBB-26: Battery backbox, holds up to two 25 AH batteries and CHG75.\u003c\/p\u003e\n\u003cp\u003eBackboxes are for use with fire alarm control panels (FACPs) and are used to mount up to two batteries and power supplies.\u003c\/p\u003e\n\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/9020-0547.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMMI-6S Interface Module Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/df-52418.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMS-9050UD(E) - Fire Alarm Control Panel with DACT Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/df-60415.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMS-9200UDLS(E) Rev 2 Intelligent Addressable FACP with Built-In Communicator Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/df-60601.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMS-9200UDLS(E) Rev 3 Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/df-52422.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMS-9200UDLS(E) Intelligent Addressable FACP with Built-In Communicator Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/df-52293.pdf\" target=\"_blank\" rel=\"noopener\"\u003eMS-9200UD Intelligent Addressable FACP with Built-In Modem Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/hon-ba-fire-dn-60602.pdf\" target=\"_blank\" rel=\"noopener\"\u003eFireWarden-100-2(E) Rev 3 Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/manuals-and-guides\/installation-guides\/hon-ba-fire-51858.pdf\" target=\"_blank\" rel=\"noopener\"\u003eBB-26 Battery Box Installation Manual\u003c\/a\u003e (Installation Manual)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132849389792,"sku":"BB-26","price":189.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/1018877787_lg.jpg?v=1793784271"},{"product_id":"fire-lite-bb-55f-battery-box","title":"Fire-Lite BB-55F Battery Box, Houses Two 55 AH Batteries, Mounts CHG-75 Charger","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite BB-55F\u003c\/strong\u003e — remote battery box housing two 12 V batteries of up to 55 AH, and the mounting for a CHG-75 battery charger.\u003c\/p\u003e\u003cp\u003eA Fire-Lite panel carries an internal charger sized for its own cabinet, so a standby calculation calling for larger batteries moves them outside. The BB-55F is the enclosure for that job, and the backbox in which the CHG-75 charger board and chassis mount when the batteries are rated 25 AH or more.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHouses up to two BAT-12550 batteries, 12 V and 55 AH each\u003c\/li\u003e\n\u003cli\u003eAlso specified for two BAT-12260 batteries, 12 V and 26 AH each\u003c\/li\u003e\n\u003cli\u003eBox 24.0\" wide × 14.0\" high × 7.75\" deep\u003c\/li\u003e\n\u003cli\u003eDoor 24.125\" wide × 14.25\" high, adding about 0.063\" to the depth\u003c\/li\u003e\n\u003cli\u003eCHG-75 mounts to the right of the holes at the top of the cabinet\u003c\/li\u003e\n\u003cli\u003eThe CHG-120F remote charging system needs an additional BB-55F for mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBB-26 is the smaller sibling at 15.6\" × 15.5\" × 5.125\", holding two BAT-12260 batteries and a CHG-75. Check the finish before ordering: Fire-Lite catalogues BB-55FR and describes it as the same box painted red, and Notifier uses that convention too, NFS-LBB with NFS-LBBR as the red version.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-50295.pdf?v=1794320492\" target=\"_blank\" rel=\"noopener\"\u003eBB-55 Battery Box Installation Manual 50295 (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat batteries fit in the BB-55F?\u003c\/strong\u003e\u003cbr\u003eUp to two 12 V batteries of up to 55 AH, such as two BAT-12550, or two BAT-12260 (26 AH).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan a charger be mounted inside?\u003c\/strong\u003e\u003cbr\u003eYes. The CHG-75 charger mounts to the right of the holes at the top of the cabinet. The CHG-120F needs an additional BB-55F for mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhere should it be mounted?\u003c\/strong\u003e\u003cbr\u003eThe installation manual calls for mounting it at least 6 in. below the fire alarm control panel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the dimensions?\u003c\/strong\u003e\u003cbr\u003e24.0 in. wide × 14.0 in. high × 7.75 in. deep.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132849455328,"sku":"BB-55F","price":338.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-battery-cabinets-default-title-fire-lite-bb-55f-battery-box-31896793743584.jpg?v=1793777970"},{"product_id":"fire-lite-bg12tr-lexan-trim-ring","title":"Fire-Lite BG12TR Trim Ring for Semi-Flush Mounting BG-12 Series Pull Stations","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite BG12TR\u003c\/strong\u003e — optional trim ring for semi-flush mounting of BG-12 Series manual pull stations.\u003c\/p\u003e\u003cp\u003eBG-12 pull stations either surface-mount on a backbox or mount semi-flush on an electrical box. The BG12TR is the trim ring Fire-Lite lists for the semi-flush option, for both the conventional BG-12 Series and the addressable BG-12LX. For the BG-12LX, Fire-Lite says the ring is usually needed on 4 in. square or double-gang boxes and not on single-gang boxes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOptional accessory in data sheet DF-52004 (BG-12 Series) and DF-52013 (BG-12LX)\u003c\/li\u003e\n\u003cli\u003eFor semi-flush mounting only; surface mounting uses the SB-10 metal or SB-I\/O plastic backbox instead\u003c\/li\u003e\n\u003cli\u003eSemi-flush boxes: standard single-gang, double-gang or 4 in. square\u003c\/li\u003e\n\u003cli\u003eThe BG-12 Series backplate overlaps a single-gang box cutout by 1\/2 in.\u003c\/li\u003e\n\u003cli\u003eCalled BG-TR in the BG-12S and BG-12SL installation sheets\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe pull station and electrical box are separate catalogue items. Do not confuse the ring with the SB-10 and SB-I\/O surface backboxes, or with the 17003 key set and 17007 hex lock, the other accessories listed for the BG-12 Series.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132849651936,"sku":"BG12TR","price":15.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-trim-rings-default-title-fire-lite-bg12tr-lexan-trim-ring-31896794726624.jpg?v=1793783606"},{"product_id":"fire-lite-dp-ms2-4-dress-panel-for-flex-402-and-flex-404","title":"Fire-Lite DP-MS2\/4 Dress Panel for Flex 402 and Flex 404","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite DP-MS2\/4\u003c\/strong\u003e is an optional dress panel for the Flex 402 and Flex 404 fire alarm control panels. It is a flange-style panel that is fitted over the control panel's internals.\u003c\/p\u003e\u003cp\u003eThe dress panel restricts access to the system wiring while leaving the membrane switch panel accessible for operation.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRestricts access to the system wiring\u003c\/li\u003e\n\u003cli\u003eLeaves the membrane switch panel accessible\u003c\/li\u003e\n\u003cli\u003eOptional accessory for Flex 402 and Flex 404 panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDress panel (flange panel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible panels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFlex 402 and Flex 404\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132854534368,"sku":"DP-MS2\/4","price":122.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/dp-ms2-4-1-w.jpg?v=1794774562"},{"product_id":"fire-lite-ipdact-2-ip-fire-alarm-communicator","title":"Fire-Lite IPDACT-2 IP Fire Alarm Communicator","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite IPDACT-2\u003c\/strong\u003e — FireWatch IP alarm communicator that moves a panel's Contact ID reporting onto Ethernet instead of phone lines.\u003c\/p\u003e\u003cp\u003eIt wires to the primary and secondary telco ports of a DACT-equipped Fire-Lite panel and holds supervised line voltage on both, so the panel dials as it always did and needs no reprogramming. It catches the off-hook, packetizes the Contact ID into encrypted UDP and sends it to a Teldat VisorALARM PLUS receiver, supervised every 30 to 90 seconds instead of daily.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePanels: MS-5UD, MS-10UD, MS-5024UD, MS-5210UD, MS-9050UD, MS-9200UD, MS-9200UDLS, MS-9600 with DACT-UD, MS-9600LS \/ MS-9600UDLS with DACT-UD2\u003c\/li\u003e\n\u003cli\u003eTwo supervised inputs, two outputs; 10\/100 Ethernet, DHCP or static IP\u003c\/li\u003e\n\u003cli\u003e24 VDC nonresettable, filtered, regulated: 93 mA standby, 136 mA alarm\u003c\/li\u003e\n\u003cli\u003eUL 864 Ninth Edition certified (UL S2424, CSFM 7300-0075:223)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt reports only to a Teldat VisorALARM PLUS IP receiver, and the central station issues the account ID, receiver addresses and UDP port. The plain IPDACT-2 has no upload\/download modem — that is the IPDACT-2UD.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132856893664,"sku":"IPDACT-2","price":583.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-communicators-default-title-fire-lite-ipdact-2-ip-fire-alarm-communicator-36060638642400.png?v=1793785149"},{"product_id":"fire-lite-rel-47k","title":"Fire-Lite REL-47K End of Line Resistor, 47K with Leads","description":"\u003ch2\u003eFirelite REL-47K End Of Line Resistor, 47K with Leads\u003c\/h2\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132862136544,"sku":"REL-47K","price":27.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-fire-alarms-default-title-fire-lite-rel-47k-31896815730912.jpg?v=1793785490"},{"product_id":"fire-lite-w-sync-wireless-av-sync-module","title":"Fire-Lite W-SYNC Wireless Av Sync Module","description":"\u003ch2\u003eFire-Lite W-SYNC Wireless Av Sync Module - Required To Sync Wireless Av With Hardwire Av\u003c\/h2\u003e\u003cdiv class=\"ths-mfr-data\"\u003e\n\u003cp\u003eW-SYNC: Wireless Sync Module, 902-928 MHz, 4.25x4.25x1.5in, 2year\u003c\/p\u003e\n\u003cp\u003eSynchronization within a single mesh network is inherent in the wireless system so a wireless synchronization module is not needed. These modules also provide wireless control and monitoring of a notification appliance circuit (NAC) expander or power supply. They operate from 24V power with supplemental battery support and communicate through the mesh network with the gateway and fire alarm control panel (FACP).\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClass A mesh network\u003c\/li\u003e\n\u003cli\u003eAddressable code wheels\u003c\/li\u003e\n\u003cli\u003eCommercial applications\u003c\/li\u003e\n\u003cli\u003eUL 864 certified\u003c\/li\u003e\n\u003cli\u003eFrequency hopping\u003c\/li\u003e\n\u003cli\u003eBi-directional communications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/gamewell-101625\/hon-ba-fire-9021-61066.pdf\" target=\"_blank\" rel=\"noopener\"\u003eW-SYNC SWIFT Sync Module\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/hbt-fire-74-5207-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSWIFT W-SYNC Sync Module\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/hbt-fire-SPDS906-01.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSWIFT W-SYNC Sync Module Datasheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/notifier-us\/hon-ba-fire-dn-61063.pdf\" target=\"_blank\" rel=\"noopener\"\u003eW-SYNC SWIFT Sync Module Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/hon-ba-fire-dn-61063.pdf\" target=\"_blank\" rel=\"noopener\"\u003eW-SYNC SWIFT Sync Module Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/SPDS906.pdf\" target=\"_blank\" rel=\"noopener\"\u003eW-SYNC Wireless Synchronization Module Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/hbt-fire-DN-61063FRC-B.pdf\" target=\"_blank\" rel=\"noopener\"\u003eW-SYNC Module de synchronisation sans fil SWIFT\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/hbt-fire-74-5207FRC-1.pdf\" target=\"_blank\" rel=\"noopener\"\u003eW-SYNC Module de synchronisation sans fil SWIFT\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132869148896,"sku":"W-SYNC","price":321.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-modules-default-title-fire-lite-w-sync-wireless-av-sync-module-31896819597536.jpg?v=1763277677"},{"product_id":"fire-lite-ms-4-fire-alarm-control-panel-4-zone","title":"Fire-Lite MS-4 Fire Alarm Control Panel 4-Zone","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite MS-4\u003c\/strong\u003e (also written MS4) is a four-zone conventional fire alarm control panel for small to medium sized commercial, industrial and institutional buildings.\u003c\/p\u003e\n\u003cp\u003eThe MS-4 is compatible with System Sensor i3 detectors, microprocessor-based conventional smoke detectors that transmit a maintenance trouble signal indicating the need for cleaning and a supervisory freeze signal when ambient temperature falls below the detector rating. It also accepts conventional input devices such as two-wire smoke detectors, four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices. Four Style B initiating device circuits are provided, one of which is programmable for combination supervisory and waterflow, and each zone carries its own Fire Alarm, Supervisory, Trouble and Maintenance LED plus a front-panel Zone Enable\/Disable button. Outputs include two Style Y notification appliance circuits, Form-C alarm, trouble and supervisory relays, and both resettable and nonresettable 24 VDC special application power. The panel supervises wiring, AC voltage and battery level, and offers a walktest mode from the front keypad.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInitiating device circuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFour IDCs, all Style B (Class B); one zone programmable for combination supervisory and waterflow; power-limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIDC operating voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNominal 20 VDC, maximum 27 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIDC alarm current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 mA minimum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIDC short circuit current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 mA maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIDC maximum loop resistance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIDC standby current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotification appliance circuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo NACs, Style Y (Class B), power-limited; nominal 24 VDC, maximum 27 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum signaling current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 amps total with the standard transformer; 5.0 amps total with the optional second transformer (2.5 amp special application, 250 mA regulated maximum per NAC), MS-4 only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNAC maximum line impedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.5 volt drop end-of-line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnd-of-line resistor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7K, 1\/2 watt (Part #71252) for both IDCs and NACs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal system current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.0 amps standard; 6.0 amps available with the optional second transformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm-C relays\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAlarm relay, fail-safe trouble relay, and supervisory relay (supervisory is MS-4 only); contacts rated 2.0 amps @ 30 VDC (resistive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eResettable special application power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNominal 24 VDC, 500 mA maximum, power-limited — appropriate for powering 4-wire smoke detectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNonresettable special application power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNominal 24 VDC, 500 mA maximum, power-limited (MS-4 only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAC power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 VAC, 2.3 A (the MS-4E allows connection to 220\/240 VAC, 1.15 A); supervised, nonpower-limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransformer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne 100 VA transformer standard; an optional second 100 VA transformer is available for the MS-4 to provide maximum accessory power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 volt battery charger for batteries up to 18 Amp Hour; cabinet provides space for two 7 Amp Hour batteries; batteries ordered separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBackbox\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14.5\" (36.8 cm) × 15.218\" (38.65 cm) × 2.875\" (7.3 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePiezo sounder\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDistinct patterns for alarm (steady), trouble (1 s on \/ 1 s off), maintenance and supervisory (½ s on \/ ½ s off)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl buttons\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAcknowledge, Alarm Silence, Reset, Walktest, plus Zone Enable\/Disable per zone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass A needs the CAC-4:\u003c\/strong\u003e the IDCs ship as Style B (Class B) and the NACs as Style Y (Class B). The CAC-4 Class A Converter Module — MS-4 only — converts the IDCs to Style D (Class A) and the NACs to Style Z (Class A). It connects to J1 on the MS-4 main circuit board. Class A is not available out of the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.0 A NAC output requires the second transformer:\u003c\/strong\u003e with the standard transformer the two NACs share 2.5 amps total. The optional second 100 VA transformer is what raises the panel to 5.0 amps of signaling current and 6.0 amps total system current.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatch the combined budget:\u003c\/strong\u003e total current for nonresettable power, resettable power and the two notification appliance circuits must not exceed 6.0 amps for the MS-4, and that figure itself requires the optional second transformer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery sizing:\u003c\/strong\u003e the charger handles up to 18 Amp Hour, but the cabinet only has room for two 7 Amp Hour batteries. Anything larger requires a UL certified battery box such as the BB-17F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround fault detection:\u003c\/strong\u003e jumper JP3 disables ground fault detection and should only be cut with the approval of the Authority Having Jurisdiction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOption module slots:\u003c\/strong\u003e the MS-4 has two sets of option module connectors (J3 \u0026amp; J5 and J4 \u0026amp; J6); the 4XTMF occupies one set. Cut JP1 to supervise a module on J3 \u0026amp; J5, JP2 for J4 \u0026amp; J6.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMS-2\u003c\/strong\u003e — two-zone version with two IDCs and a single NAC; no supervisory relay and no nonresettable power output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-ms-4e\"\u003eMS-4E\u003c\/a\u003e\u003c\/strong\u003e — same features as the MS-4 but allows connection to 220\/240 VAC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAC-4\u003c\/strong\u003e — Class A converter module, MS-4 only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4XTMF\u003c\/strong\u003e — transmitter module providing a supervised output for a local energy municipal box transmitter plus alarm and trouble reverse polarity, with disable switch and disable trouble LED.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDP-MS2\/4\u003c\/strong\u003e — dress panel; \u003cstrong\u003eTR-1-R\u003c\/strong\u003e optional trim ring for semi-flush mounting the cabinet; \u003cstrong\u003eBB-17F\u003c\/strong\u003e battery box for batteries above 7 Amp Hour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes the MS-4 support Class A wiring?\u003c\/strong\u003e\u003cbr\u003eNot out of the box. The IDCs ship Style B and the NACs Style Y (Class B). The CAC-4 Class A Converter Module, MS-4 only, converts them to Style D and Style Z (Class A).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much NAC current does the MS-4 provide?\u003c\/strong\u003e\u003cbr\u003e2.5 A total with the standard transformer; 5.0 A total with the optional second 100 VA transformer.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms manual \"Fire Alarm Control Panels MS-2 \u0026amp; MS-4, MS-2E \u0026amp; MS-4E Instruction Manual,\" document 51512 Rev. G3 (8\/6\/2014). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132870066400,"sku":"MS-4","price":916.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-control-panels-default-title-fire-lite-ms-4-fire-alarm-control-panel-4-zone-33036074909920.jpg?v=1794753299"},{"product_id":"fire-lite-es-50x-addressable-fire-alarm-control-panel-50-point","title":"Fire-Lite ES-50X 50-Point Addressable Fire Alarm Control Panel","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite ES-50X\u003c\/strong\u003e — intelligent addressable fire alarm control panel with one signaling line circuit, 50-point device capacity and a pre-installed IPOTS-COM dual-technology (IP and POTS) central station communicator.\u003c\/p\u003e\n\u003cp\u003eThe ES-50X is a direct replacement for the MS-9050UD and programs just like Fire•Lite’s other addressable panels, yet fits into applications previously served only by conventional panels. Its single SLC (DCL) loop supports any combination of addressable detectors and modules up to 50 devices, meets NFPA Class A or Class B requirements, and runs up to 10,000 ft. (3,000 m) in LiteSpeed mode over twisted, unshielded wire. Two independently programmable notification appliance circuits may each be configured Class A or Class B, with selectable strobe synchronization per NAC for System Sensor, Wheelock and Gentex appliances. The pre-installed IPOTS-COM communicator reports to a central station over the public switched telephone network and over the Internet, saving the monthly cost of two dedicated business telephone lines; optional cellular reporting is available using HW-TG7F Series communicators or the CLSS Pathway. The ES-50X ships as the main circuit board with display, pre-installed IPOTS-COM communicator, chassis with transformer, backbox with door, and a plastic bag containing screws, cables and key.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSignaling line circuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne intelligent SLC (DCL); meets NFPA Class B and Class A requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAddressable device capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 (any combination of addressable detectors and modules)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProgrammable software zones\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAnnunciators\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16 (up to 8 per ANN-BUS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSLC protocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLiteSpeed and CLIP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSLC wire run\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 10,000 ft. (3,000 m) in LiteSpeed mode, twisted unshielded wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotification appliance circuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTerminal block provides connections for two NACs, Class B or Class A; special application power; power-limited, supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum signaling current per NAC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.5 A special application; 250 mA regulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal 24 VDC system power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.7 A maximum, shared between all NAC circuits and the ANN-BUS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNAC end-of-line resistor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7k ohm, ½ watt (P\/N 71252 UL certified) for Class B NAC; system capable of 1.9k–22k ohm ELR range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRelays\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo programmable Form-C relays and one fixed trouble relay; 2.0 A @ 30 VDC (resistive), 0.5 A @ 30 VAC (resistive); non-power-limited, non-supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAC power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 or 240 VAC, 50\/60 Hz, 3.25 A, auto-sensing (no switch required); minimum 14 AWG (2.00 mm²) with 600 V insulation; non-power-limited, supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo 12 V 18 AH lead-acid; charger capacity 7–18 AH; cabinet holds a maximum of two 18 AH batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegral 80-character LCD with backlighting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHistory file\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1,000 events\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBackbox\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.00\" (48.26 cm) H × 16.65\" (42.29 cm) W × 5.25\" (13.34 cm) D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDoor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.26\" (48.92 cm) H × 16.82\" (42.73 cm) W × 0.72\" (1.82 cm) D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26.9 lbs. (12.20 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating environment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0–49°C \/ 32–120°F, relative humidity 93% ± 2% RH noncondensing at 32°C ± 2°C (90°F ± 3°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCertified to UL Standard 864, 10th edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency certifications (ES-50X)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL: S624; FM approved; CSFM 7165-0075:0500, 7165-0075:0511; FDNY COA #2021-TMCOAP-009618-AMD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower budget:\u003c\/strong\u003e the 2.5 A figure is per NAC. Maximum or total 24 VDC system power shared between all NAC circuits and the ANN-BUS is 2.7 A — size annunciators and notification load against that total, not against a single circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNAC count:\u003c\/strong\u003e the terminal block provides connections for two NACs. Each may be wired Class A or Class B; Class A does not add circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDress panel:\u003c\/strong\u003e the ES-50X carton does not include a dress panel (the ES-50XC, ES-50XI and ES-50XP do). Order DP-ES-R separately; TR-CE is the trim ring for semi-flush mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBatteries:\u003c\/strong\u003e the cabinet holds a maximum of two 18 AH batteries and the onboard charger covers 7–18 AH. Anything larger than 18 AH requires a CHG-75 or CHG-120F charger and an external enclosure such as BB-26 or BB-55F.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegacy devices:\u003c\/strong\u003e 300 Series devices such as CP300\/CP350, SD300(T)\/SD350(T), M300, M301, M302, C304 and BG-10LX are not compatible with LiteSpeed polling. If any are on the SLC, polling must be set to standard CLIP protocol.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgramming:\u003c\/strong\u003e databases upload and download through the panel USB port, or over ethernet using the IPOTS-COM. Offline programming with FS-Tools requires an ethernet connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eSearching for the Firelite ES50X? This is the base ES-50X: pre-installed IPOTS-COM communicator and no dress panel in the carton. It is the direct replacement for the MS-9050UD and programs like Fire•Lite's other addressable panels.\u003c\/p\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eES-50XC\u003c\/strong\u003e — same panel and pre-installed IPOTS-COM communicator, but the carton includes a dress panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eES-50XI\u003c\/strong\u003e — no communicator fitted; includes dress panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-es-50xp-addressable-fire-alarm-control-panel\"\u003eES-50XP\u003c\/a\u003e\u003c\/strong\u003e — integrated CLSS Pathway Pro dual-SIM (AT\u0026amp;T\/Verizon) 5G LTE-M communicator in place of the IPOTS-COM; certified under ETL 5017286 and CSFM 7165-0075:0511.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMS-9050UD\u003c\/strong\u003e — the legacy panel the ES-50X Series directly replaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms data sheet \"ES-50X Series Intelligent Addressable Fire Alarm Control Panels,\" document DF-60953:D (3\/27\/2023). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-DF-60953_ES-50X.pdf?v=1794290257\" target=\"_blank\" rel=\"noopener\"\u003eES-50X Intelligent Addressable FACP — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat panel does the ES-50X replace?\u003c\/strong\u003e\u003cbr\u003eFire-Lite describes the ES-50X as a direct replacement for the MS-9050UD\/LS. It supports up to 50 addressable devices in any combination of detectors and modules.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a communicator included?\u003c\/strong\u003e\u003cbr\u003eYes. The IPOTS-COM dual-technology communicator comes pre-installed and reports to a central station over the telephone network and over the Internet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the dress panel included?\u003c\/strong\u003e\u003cbr\u003eNo. The DP-ES-R dress panel is an optional accessory, and the TR-CE trim ring is available for semi-flush mounting.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the panel programmed?\u003c\/strong\u003e\u003cbr\u003eWith the FS-Tools upload\/download utility, through the panel USB port or over an ethernet connection using the IPOTS-COM. The USB port also accepts a flash drive for the program, history file and walk-test data.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132870099168,"sku":"ES-50X","price":946.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-control-panels-default-title-fire-lite-es-50x-addressable-fire-alarm-control-panel-50-point-34899778830560.jpg?v=1793777411"},{"product_id":"fire-lite-sd365-iv-addressable-smoke-detector-ivory","title":"Fire-Lite SD365-IV Addressable Smoke Detector Ivory","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite SD365-IV\u003c\/strong\u003e — ivory, low-profile intelligent plug-in photoelectric smoke detector for Fire•Lite addressable fire alarm control panels, operating in both CLIP and LiteSpeed protocol.\u003c\/p\u003e\n\u003cp\u003eThe SD365 Series is the direct replacement for the SD355 Series, with a sleek low-profile design and an enhanced optical sensing chamber engineered to sense smoke produced by a wide range of combustion sources in accordance with more stringent code standards. Point ID capability lets each detector’s address be set with rotary decimal address switches, so the panel reports the exact detector location during the early stages of a fire. Two LEDs on each sensor blink when the detector is polled and latch on in alarm. The head plugs into a detachable base, which simplifies installation and service and allows photoelectric, ionization and thermal sensors to be interchanged on the same base. A built-in functional test switch is activated by an external magnet, and the removable cover with insect-resistant screen allows simple field cleaning. Each detector’s sensitivity can be tested from the panel as required by NFPA 72 Chapter 14, and the results printed for record keeping.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCLIP and LiteSpeed (the \"-IV\" suffix indicates a CLIP and LiteSpeed device)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIvory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSLC connection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-wire SLC loop; unit uses base for wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAddressing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRotary, decimal address switches (device capacity is panel dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensitivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL applications 0.5% to 4.0% per foot obscuration; ULC applications 0.5% to 3.5% per foot obscuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFactory setting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePreset at 1.5% nominal sensitivity for panel alarm threshold level\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15–32 volts DC peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandby current (max. avg.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 µA @ 24 VDC (one communication every 5 seconds with LED enabled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 mA @ 24 VDC (latched ON)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.0\" (51 mm) high; base determines diameter — B300-6 is 6.1\" (15.6 cm), B501 is 4\" (10.2 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 oz. (95 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32°F to 122°F (0°C to 50°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRelative humidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10%–93% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVelocity range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL\/ULC certified 0–4000 ft\/min. (1219.2 m\/min.), suitable for installation in ducts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFire-resistant plastic; sealed against back pressure; SEMS screws for wiring of the separate base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDesigned to meet UL 268 7th Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency certifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL\/ULC certification S1059; FM Approved; CSFM 7272-0075:0502\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMexico\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol matters:\u003c\/strong\u003e the ivory \"-IV\" version runs CLIP as well as LiteSpeed. The plain white SD365 is LiteSpeed only — the difference is decisive on an SLC that contains legacy devices forcing the panel into CLIP polling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo end-of-line resistors:\u003c\/strong\u003e because of the inherent supervision provided by the SLC loop, EOL resistors are not required. Wiring T-taps or branches are permitted for Class B wiring only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox depth:\u003c\/strong\u003e mount the detector base (all base types) on an electrical backbox at least 1.5\" (3.81 cm) deep. See DF-60059 for the chart of compatible junction boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBases are separate items:\u003c\/strong\u003e the detector plugs into a detachable base, and bases are listed as their own ordering items — \u003ca href=\"\/products\/system-sensor-b300-6-iv-6-detector-base-ivory\"\u003eB300-6-IV\u003c\/a\u003e (6\" flanged), \u003ca href=\"\/products\/system-sensor-b501-iv-4-inch-base-ivory\"\u003eB501-IV\u003c\/a\u003e (4\" flangeless), plus relay (B224RB-IV), isolator (B224BI-IV) and sounder (B200S-IV) bases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolator limits:\u003c\/strong\u003e when using relay or sounder bases, consult the I300(A) installation sheet I56-3626 for device limitations between isolator modules and isolator bases.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWalk test display:\u003c\/strong\u003e the address blink readout during walk test (address 121 blinks 12-[pause]-1) works on LiteSpeed systems only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpacing:\u003c\/strong\u003e space detectors in compliance with NFPA 72; in low airflow applications with a smooth ceiling, space detectors 30 feet (9.1 m).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-sd365-addressable-smoke-detector\"\u003eSD365\u003c\/a\u003e\u003c\/strong\u003e — white version; LiteSpeed protocol only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSD365A-IV\u003c\/strong\u003e — same as SD365-IV but with ULC certification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSD365T-IV\u003c\/strong\u003e — adds a built-in 135°F (57°C) fixed-temperature thermal device; operating temperature range narrows to 32°F to 100°F (0°C to 38°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSD365R-IV\u003c\/strong\u003e — remote test capable, for use with DNR\/DNRW duct smoke detector housings; rated -4°F to 158°F (-20°C to 70°C) when installed in a DNR\/DNRW.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSD355 Series\u003c\/strong\u003e — the legacy detectors the SD365 Series directly replaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms data sheet \"SD365 Series Addressable Photoelectric Smoke Detectors,\" document DF-61010:C (5\/28\/2020). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-I56-6523.pdf?v=1794289784\" target=\"_blank\" rel=\"noopener\"\u003eSD365, SD365-IV Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs a base included?\u003c\/strong\u003e\u003cbr\u003eNo. The sensor base is supplied separately; Fire-Lite gives dimensions for the B300-6 (6.2\" diameter installed) and B501 (4.1\" diameter installed) bases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the SD365-IV addressed?\u003c\/strong\u003e\u003cbr\u003eWith rotary dial switches on the sensor, set before the head is installed in its base.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be used in ducts?\u003c\/strong\u003e\u003cbr\u003eFire-Lite gives an air velocity range of 0 to 4000 ft\/min and states UL 268A for duct applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I add a remote LED?\u003c\/strong\u003e\u003cbr\u003eYes. The sensor has an output for the optional RA100Z remote LED annunciator.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132870131936,"sku":"SD365-IV","price":197.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-smoke-detectors-default-title-fire-lite-sd365-iv-addressable-smoke-detector-ivory-31896816910560.jpg?v=1793776948"},{"product_id":"fire-lite-ann-80-lcd-serial-annunciator-red","title":"Fire-Lite ANN-80 LCD Serial Annunciator Red","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite ANN-80\u003c\/strong\u003e (also written ANN80) is a compact, backlit 80-character LCD serial annunciator in red that mimics the fire alarm control panel display over the ANN-Bus.\u003c\/p\u003e\n\u003cp\u003eThe ANN-80 displays English-language text of system point information including device type, zone, and independent point alarm, trouble or supervisory status, along with any custom alpha labels programmed into the control panel. It provides system status LEDs for AC Power, Alarm, Trouble, Supervisory and Alarm Silenced, plus control switches for System Acknowledge, Signal Silence, Drill and Reset. A keyswitch prevents unauthorized operation of the control switches and mechanically locks the annunciator enclosure; both the keyswitch and the individual control switches can be enabled or disabled at the FACP, and the enclosure is supervised for tamper. The ANN-80 and the FACP communicate over a two-wire serial interface using the ANN-Bus format, with two additional wires carrying power from either the host FACP or a remote UL-certified filtered power supply. No programming is required, which saves time during system commissioning. This is the red model; order ANN-80-W for white.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBacklit 80-character LCD (20 characters × 4 lines)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommunication\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-wire serial interface using the ANN-Bus communication format, plus two wires for power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDevices per ANN-Bus\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to eight ANN-80s per FACP ANN-Bus; each ANN-Bus device requires a unique address (ID number)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating voltage range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18 VDC to 28 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCurrent consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 mA maximum @ 24 VDC nominal (filtered and non-resettable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum distance from panel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to 6,000 feet (1,800 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower circuit wire\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 to 18 AWG (0.75–2.08 mm²) for the 24 VDC power circuit; distance limited by 1.2 volt maximum line drop from source to end of circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCircuit supervision\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAll connections are power-limited and supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.375\" (13.65 cm) high × 6.875\" (17.46 cm) wide × 1.375\" (3.49 cm) deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAmbient temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32°F to 120°F (0°C to 49°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRelative humidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e93% ± 2% RH (non-condensing) at 32°C ± 2°C (90°F ± 3°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnvironment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFor use indoors in a dry location\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSurface mount directly to wall or to single, double or 4\" square electrical box; semi-flush mount to single, double or 4\" square electrical box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCertified to UL Standard 864, 9th Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency certifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL: S2424; FM approved; CSFM 7120-0075:0211; MEA 442-06-E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight per bus, not per system:\u003c\/strong\u003e a maximum of eight devices can be connected to one FACP ANN-Bus communication circuit. Panels offering two ANN-Bus circuits reach a higher total, but any single bus still stops at eight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower budget:\u003c\/strong\u003e the ANN-Bus can be powered by an auxiliary power supply when the number of ANN-Bus devices exceeds the ANN-Bus power capability. Remember the annunciator load shares the panel’s 24 VDC budget with the notification circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire sizing is drop-limited:\u003c\/strong\u003e 14 to 18 AWG is acceptable for the 24 VDC power circuit, but the real limit is a 1.2 volt maximum line drop from source to end of circuit — calculate the total worst case current draw for all modules on the 4-conductor bus before fixing the wire gauge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled viewing:\u003c\/strong\u003e use the ANN-SB80KIT surface mount backbox with angled wedge where the annunciator sits above or below eye level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBacklight behavior:\u003c\/strong\u003e the backlight turns off during AC loss to conserve battery power, and turns back on if an alarm condition occurs. This is normal, not a fault.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e rated for indoor, dry locations only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-ann-80-w-lcd-fire-annunciator-white\"\u003eANN-80-W\u003c\/a\u003e\u003c\/strong\u003e — identical annunciator in white.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANN-SB80KIT-R\u003c\/strong\u003e — red surface mount backbox with angled wedge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eANN-SB80KIT-W\u003c\/strong\u003e — white surface mount backbox with angled wedge.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many ANN-80 annunciators can one panel run?\u003c\/strong\u003e\u003cbr\u003eUp to eight per FACP ANN-Bus, each with a unique address.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow far can the ANN-80 be from the panel?\u003c\/strong\u003e\u003cbr\u003eUp to 6,000 ft (1,800 m), limited by a 1.2 volt maximum line drop on the 24 VDC power circuit.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms data sheet \"ANN-80 80-Character Serial LCD Annunciator,\" document DF-52417:D (3\/15\/2018). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-52749-D4-ANN-80.pdf?v=1794292561\" target=\"_blank\" rel=\"noopener\"\u003eANN-80 Series Product Installation Document (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132870459616,"sku":"ANN-80","price":427.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-annunciators-default-title-fire-lite-ann-80-lcd-serial-annunciator-red-31896789450976.jpg?v=1793777452"},{"product_id":"fire-lite-mmf-302-addressable-monitor-module","title":"Fire-Lite MMF-302 Addressable Monitor Module for Two-Wire Smoke Detectors, One Zone","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite MMF-302\u003c\/strong\u003e — addressable interface module that monitors and powers one zone of conventional two-wire smoke detectors on an intelligent SLC.\u003c\/p\u003e\u003cp\u003eMost Fire-Lite monitor modules supervise dry contact devices, which need no operating power. The MMF-302 is the member of the family built for two-wire smoke detectors, which do, and it reports a whole conventional zone to the panel as one addressable point.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMonitors one zone of UL compatible two-wire 24 volt smoke detectors, Class B or Class A\u003c\/li\u003e\n\u003cli\u003eEnd of line resistance 3.9 kΩ, supplied\u003c\/li\u003e\n\u003cli\u003e15 to 32 VDC nominal; 5.1 mA maximum with the LED on, 270 µA average\u003c\/li\u003e\n\u003cli\u003eMaximum IDC wiring resistance 25 Ω\u003c\/li\u003e\n\u003cli\u003eExternal supply 24 volts power limited, 90 mA per module maximum\u003c\/li\u003e\n\u003cli\u003e4.5 by 4 by 1.25 in., mounting to a 4 in. square by 2.125 in. deep box\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe rest of the family monitors dry contacts on a 47 kΩ end of line resistor, so the resistor value alone separates them: MMF-300 takes a Class B or Class A dry contact circuit, MMF-301 is the miniature version fitting behind the device it monitors, and MDF-300 gives two Class B circuits. MMF-302-6 is the six-zone version.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132870525152,"sku":"MMF-302","price":140.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-monitor-modules-default-title-fire-lite-mmf-302-addressable-monitor-module-33745520918752.jpg?v=1793783258"},{"product_id":"fire-lite-h365-addressable-heat-detector-135-f-fixed-thermal-sensor","title":"Fire-Lite H365 Addressable Heat Detector 135°F Fixed Thermal Sensor","description":"\u003ch2\u003eFire-Lite H365 addressable heat detector: 135°F fixed temperature, LiteSpeed only\u003c\/h2\u003e\n\u003cp\u003eThe Fire-Lite H365 is a low-profile intelligent plug-in thermal (heat) detector with a 135°F (57°C) fixed-temperature set point, in white, for LiteSpeed protocol only. The H365 Series is designed for both performance and aesthetics, with modern styling and thermistor technology for fast response.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSleek, low-profile, stylish design\u003c\/li\u003e\n\u003cli\u003eState-of-the-art thermistor technology for fast response\u003c\/li\u003e\n\u003cli\u003eIntegral communications and built-in device-type identification\u003c\/li\u003e\n\u003cli\u003eBuilt-in tamper-resistant feature\u003c\/li\u003e\n\u003cli\u003eBuilt-in functional test switch activated by an external magnet\u003c\/li\u003e\n\u003cli\u003eTwo-wire SLC loop connection; the detector uses a base for wiring\u003c\/li\u003e\n\u003cli\u003eRotary decimal address switches (device capacity depends on the panel)\u003c\/li\u003e\n\u003cli\u003eColor options include white, ivory and black (color kit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eH365 (white)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLiteSpeed only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThermal rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFixed temperature, 135°F (57°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 to 32 VDC peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandby current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 µA at 24 VDC (one communication every 5 seconds, LED enabled)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 mA at 24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-4°F to 100°F (-20°C to 38°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHumidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10% to 93% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpacing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL: 50 ft. center to center; FM: 25 x 25 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.0 in. high; diameter set by base (B300-6: 6.1 in., B501: 4 in.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBase\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eB300-6(A) flanged base included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL\/ULC S2517, FM Approved, CSFM 7272-0075:0501\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThe white H365 runs LiteSpeed only. For a loop that needs CLIP and LiteSpeed, use the ivory \u003ca href=\"\/products\/fire-lite-h365-iv-addressable-heat-detector-ivory\"\u003eH365-IV\u003c\/a\u003e. The H365 pairs with addressable manual stations such as the \u003ca href=\"\/products\/fire-lite-bg-12lx-dual-action-pull-station\"\u003eFire-Lite BG-12LX\u003c\/a\u003e to give manual activation on the same SLC loop.\u003c\/p\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-h365r-addressable-heat-detector\"\u003eH365R\u003c\/a\u003e - rate-of-rise plus 135°F fixed, white\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-h365ht-addressable-heat-detector\"\u003eH365HT\u003c\/a\u003e - 190°F high-temperature detector, white\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-h365-iv-addressable-heat-detector-ivory\"\u003eH365-IV\u003c\/a\u003e - ivory, CLIP and LiteSpeed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms data sheet \"H365(A) Series Addressable Thermal Detectors,\" document DF-61011. Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-H365_DF-61011.pdf?v=1794294795\" target=\"_blank\" rel=\"noopener\"\u003eH365 Series Addressable Heat Detectors — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-I56-6525.pdf?v=1794294798\" target=\"_blank\" rel=\"noopener\"\u003eH365(A) Series Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs a base included with the H365?\u003c\/strong\u003e\u003cbr\u003eYes. The B300-6(A) flanged mounting base is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the H365 work on a CLIP loop?\u003c\/strong\u003e\u003cbr\u003eNo. The white H365 is LiteSpeed only. The ivory H365-IV supports both CLIP and LiteSpeed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat spacing is it approved for?\u003c\/strong\u003e\u003cbr\u003eUL approved for 50 ft (15.24 m) center-to-center and FM approved for 25 x 25 ft (7.62 x 7.62 m).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs there a rate-of-rise or high temperature version?\u003c\/strong\u003e\u003cbr\u003eYes. The H365R adds rate-of-rise to the 135°F fixed set point, and the H365HT is the 190°F high temperature detector.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132870557920,"sku":"H365","price":81.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-heat-detectors-default-title-fire-lite-h365-addressable-heat-detector-135-f-fixed-thermal-sensor-31896801411296.jpg?v=1793777038"},{"product_id":"fire-lite-bg-12s-single-action-pull-station","title":"Fire-Lite BG-12S Single-Action Pull Station, Hex Lock, Pigtail Leads","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite BG-12S\u003c\/strong\u003e — single-action, non-coded manual pull station with pigtail leads and hex-lock reset.\u003c\/p\u003e\u003cp\u003eIt gives a Fire-Lite or other panel one normally open alarm input. It is the single-action BG-12: pulling the handle down trips it with no push-in step, and it wires with pigtails where the dual-action models use a screw terminal strip.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne SPST normally open switch, gold-plated, rated 0.25 A at 30 VAC or VDC\u003c\/li\u003e\n\u003cli\u003eRed (+) and black (-) in and out pigtail leads to the initiating device circuit\u003c\/li\u003e\n\u003cli\u003eHandle latches down and shows ACTIVATED; reset with the supplied 9\/64 in. hex wrench, a quarter turn\u003c\/li\u003e\n\u003cli\u003eADA 5 lb maximum pull force; Braille on the handle\u003c\/li\u003e\n\u003cli\u003eSurface mount on SB-10 or SB-I\/O back box, or semi-flush on a single-gang, double-gang or 4 in. square box\u003c\/li\u003e\n\u003cli\u003e5.5 × 4.121 × 1.39 in.; BG-12 Series certifications UL S711, FM, CSFM 7150-0075:184, MEA 67-02-E\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBG-12SL is the same station with a key lock (its data sheet row says Same as BG-12, but its installation sheet says single action). BG-12 and BG-12L are dual action with screw terminals, BG-12LO is outdoor listed and BG-12LX is addressable.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132870656224,"sku":"BG-12S","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-pull-stations-default-title-fire-lite-bg-12s-single-action-pull-station-34111416533216.jpg?v=1763277724"},{"product_id":"fire-lite-mrp-2002","title":"Fire-Lite MRP-2002 Agent Release Control Panel 120 VAC","description":"\u003ch2\u003eFire-Lite MRP-2002 Single and Dual Hazard Agent Release Control Panel, 6-Zone and 24V\u003c\/h2\u003e\n\u003cp\u003eThe MRP-2002 is a six-zone FACP for single and dual hazard agent releasing applications. The MRP-2002 provides reliable fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based releasing.\u003c\/p\u003e\n\u003cp\u003eThe MRP-2002 is compatible with System Sensor's i3 detectors which are conventional smoke detectors that can transmit a maintenance trouble signal to the FACP indicating the need for cleaning and a supervisory 'freeze' signal when the ambient temperature falls below the detector rating of approximately 45°F (7.22°C).\u003c\/p\u003e\n\u003cp\u003eIn addition, the control panel is compatible with conventional input devices such as two-wire smoke detectors, four-wire smoke detectors, pull stations, waterflow devices, tamper switches and other normally-open contact devices. Refer to the FireLite Device Compatibility Document for a complete listing of compatible devices. Four outputs are programmable as NACs (Notification Appliance Circuits) or releasing circuits.\u003c\/p\u003e\n\u003cp\u003eThree programmable Form-C relays (factory programmed for Alarm, Trouble and Supervisory) and 24 VDC special application resettable and non-resettable power outputs are also included on the main circuit board. The MRP-2002 supervises all wiring, AC voltage, battery charger and battery level.\u003c\/p\u003e\n\u003cp\u003eActivation of a compatible smoke detector or any normallyopen fire alarm initiating device will activate audible and visual signaling devices, illuminate an indicator, display alarm information on the panel's LCD, sound the piezo sounder at the FACP, activate the FACP alarm relay and operate an optional module used to notify a remote station or initiate an auxiliary control function.\u003c\/p\u003e\n\u003cp\u003eThe MRP-2002E offers the same features as the MRP-2002 but allows connection to 220\/240 VAC. Unless otherwise specified, the information in this data sheet applies to both the 110\/ 120 VAC and 220\/240 VAC versions of the panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMRP-2002 Fire Alarm Control Panel\u003cbr\u003eBackbox\u003cbr\u003ePower Supply\u003cbr\u003eTechnical Manual\u003cbr\u003eInstruction Sheet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeets International Building Code IBC seismic requirements\u003c\/li\u003e\n\u003cli\u003eAdjustable pre-discharge, discharge and waterflow delay timers.\u003c\/li\u003e\n\u003cli\u003eDual hazard operation\u003c\/li\u003e\n\u003cli\u003eMeets International Building Code (IBC) seismic requirements.\u003c\/li\u003e\n\u003cli\u003eDisable\/Enable control per input zone and output zone.\u003c\/li\u003e\n\u003cli\u003eExtensive transient protection.\u003c\/li\u003e\n\u003cli\u003eDual hazard operation.\u003c\/li\u003e\n\u003cli\u003eCross-zone (double-interlock) capability.\u003c\/li\u003e\n\u003cli\u003eSix programmable Style B (Class B) IDCs (Initiating Device Circuit).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-df-60238.pdf?v=1794320027\" target=\"_blank\" rel=\"noopener\"\u003eMRP-2002(E) Agent Release Control Panel — Data Sheet DF-60238 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-53049.pdf?v=1794320031\" target=\"_blank\" rel=\"noopener\"\u003eMRP-2002\/MRP-2002E\/MRP-2002C Instruction Manual 53049 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich agent releasing standards is it designed for?\u003c\/strong\u003e\u003cbr\u003eThe MRP-2002 is designed for agent releasing standards NFPA 12, 12A, 12B and 2001, for single and dual hazard applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the MRP-2002 and MRP-2002E?\u003c\/strong\u003e\u003cbr\u003eThe MRP-2002E has the same features but connects to 220\/240 VAC instead of 120 VAC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich annunciators and modules can I add?\u003c\/strong\u003e\u003cbr\u003eUp to eight ANN-BUS devices in total, such as the ANN-80 remote LCD annunciator, ANN-I\/O LED driver, ANN-S\/PG printer module, ANN-RLY relay module and ANN-LED annunciator module. An ANN-SEC card adds a secondary ANN-BUS.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the inputs and outputs be converted to Class A?\u003c\/strong\u003e\u003cbr\u003eYes, with the optional CAC-5X Class A converter module for the outputs and IDCs.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132870721760,"sku":"MRP-2002","price":1403.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/FL-MRP2002_lg.jpg?v=1793782740"},{"product_id":"fire-lite-bg-12l-dual-action-pull-station","title":"Fire-Lite BG-12L Dual-Action Pull Station","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite BG-12L\u003c\/strong\u003e (also written BG12L) is a dual-action manual pull station with an SPST N\/O switch, screw terminal connections and a key lock. It belongs to the BG-12 Series of manual fire alarm boxes.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"\/products\/fire-lite-bg-12lx-dual-action-pull-station\"\u003e\u003cstrong\u003eFire Lite pull station\u003c\/strong\u003e\u003c\/a\u003e BG-12 Series is a cost-effective, feature-packed line of manual fire alarm boxes designed for reliability. It was designed to meet multiple applications with the installer and end-user in mind. The BG-12 Series features a variety of models, including single- and dual-action versions.\u003c\/p\u003e\u003cp\u003eThe BG-12 Series provides Fire·Lite Alarm Control Panels (FACPs) and other manufacturers' controls with a manual alarm initiating input signal. Its innovative design, durable construction, and multiple mounting options make the BG-12 Series simple to install, maintain, and operate.\u003c\/p\u003e\n\u003cp\u003eFeatures\u003c\/p\u003e\n\u003cp\u003eAesthetically pleasing, highly visible design and color\u003cbr\u003eBraille text is included on the finger-hold area of the operation handle and across the top of the handle\u003cbr\u003eMultiple hex- and key-lock models are available\u003cbr\u003eMeets UL 38, Standard for Manually Actuated Signaling Boxes\u003cbr\u003eStation can be opened for inspection and maintenance without initiating an alarm\u003cbr\u003eProduct ID label is viewable by simply opening the cover; the label is made of a durable, long-life material\u003cbr\u003eThe terminal strip includes Phillips combination-head captive 8\/32 screws for easy connection to Initiating Device Circuit (IDC)\u003cbr\u003eTerminal screws backed out at factory and shipped ready to accept field wiring (up to 12 AWG\/3.1 mm²)\u003cbr\u003eTerminal numbers are molded into the backplate, eliminating the need for labels\u003cbr\u003eDesigned to replace the Fire·Lite legacy BG-10 Series\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThe BG-12 Series is designed to replace the Fire-Lite legacy BG-10 Series. Related parts on this site:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-bg-12-dual-action-pull-station\"\u003eBG-12\u003c\/a\u003e: dual action pull station in the same series.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-bg-12s-single-action-pull-station\"\u003eBG-12S\u003c\/a\u003e: single-action version with hex lock.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-bg-12lx-dual-action-pull-station\"\u003eBG-12LX\u003c\/a\u003e: addressable version.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-sb-10-surface-mount-backbox\"\u003eSB-10\u003c\/a\u003e: metal surface mount backbox for BG-12 series stations.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-bg12tr-lexan-trim-ring\"\u003eBG12TR\u003c\/a\u003e: trim ring for semi-flush mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan the BG-12L be opened for inspection without sending an alarm?\u003c\/strong\u003e\u003cbr\u003eYes. The station can be opened for inspection and maintenance without initiating an alarm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat wire size do the terminals take?\u003c\/strong\u003e\u003cbr\u003eUp to 12 AWG (3.1 mm²), on captive 8\/32 screws that are backed out at the factory and ship ready for field wiring.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-DF_52004.pdf?v=1794294765\" target=\"_blank\" rel=\"noopener\"\u003eBG-12 Series Manual Fire Alarm Pull Stations — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132870754528,"sku":"BG-12L","price":44.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-pull-stations-default-title-fire-lite-bg-12l-dual-action-pull-station-31896795021536.jpg?v=1793777185"},{"product_id":"fire-lite-slc-2ls-fire-alarm-expander-module","title":"Fire-Lite SLC-2LS Fire Alarm Expander Module","description":"\u003ch2\u003eFire-Lite SLC-2LS Fire Alarm Expander Module for FACP Control Panel, Adds Second SLC Loop\u003c\/h2\u003e\n\u003cp\u003eThe optional SLC-2LS Expander Module provides a second SLC loop for the FACP control panel.\u003c\/p\u003e\n\u003cp\u003eThis allows the connection of an additional 318 addressable devices, bringing the total to 636 addressable devices that can be connected to the FACP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy mount chassis\u003c\/li\u003e\n\u003cli\u003eLarge enclosure allows 18 amp-hour batteries\u003c\/li\u003e\n\u003cli\u003e7 amp switching power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the SLC-2LS add?\u003c\/strong\u003e\u003cbr\u003eA second SLC loop, which connects up to 318 more addressable devices, for 636 in total.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich panels accept it?\u003c\/strong\u003e\u003cbr\u003eIt is an option card for Fire-Lite addressable panels. Check the panel installation manual to confirm the SLC-2LS is supported.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132870820064,"sku":"SLC-2LS","price":757.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-expander-module-default-title-fire-lite-slc-2ls-fire-alarm-expander-module-31896820023520.jpg?v=1763277745"},{"product_id":"fire-lite-ms-10ud-7-10-zone-conventional-fire-control-panel","title":"Fire-Lite MS-10UD-7 10 Zone Conventional Fire Control Panel","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite MS-10UD-7\u003c\/strong\u003e is a ten-zone conventional fire alarm control panel with a built-in digital alarm communicator\/transmitter (DACT). It is supplied with the FLPS-7 power supply, which provides 7.0 amps total 24 VDC output current.\u003c\/p\u003e\u003cp\u003eThe MS-10UD combination control and communicator panel protects small to medium sized commercial, industrial and institutional buildings. It works with System Sensor i3 conventional smoke detectors, which send a maintenance trouble signal when cleaning is needed and a supervisory freeze signal below approximately 45°F, and with conventional input devices such as two-wire and four-wire smoke detectors, pull stations, waterflow devices and tamper switches.\u003c\/p\u003e\u003cp\u003eOutputs include four NACs, three programmable Form-C relays (factory set for alarm, trouble and supervisory) and 24 VDC special application resettable and nonresettable power. The panel supervises all wiring, AC voltage, battery level and telephone line integrity. The integral DACT reports to a central station over the public switched telephone network, supports remote programming with the PS-Tools upload\/download utility, and can be programmed locally through the USB port.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInitiating device circuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTen programmable IDCs, Style B (Class B); supervised and power-limited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotification appliance circuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFour NACs, Style Y (Class B), special application power, nominal 24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum signaling current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.0 amps total; 3.0 amps special application, 300 mA regulated maximum per NAC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm-C relays\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThree programmable: alarm, fail-safe trouble, supervisory; 2 A at 30 VDC (resistive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnd-of-line resistor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.7k ohm, 1\/2 watt (Part #71252) for IDCs and NACs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAC power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 VAC, 60 Hz, 3.90 amps (FLPS-7)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSealed lead acid; minimum 7 Amp Hour, charger capacity up to 26 Amp Hour; cabinet houses two 18 Amp Hour batteries\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80-character (4 x 20) backlit LCD; 256-event history log\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL 864, 9th Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass A is not standard:\u003c\/strong\u003e IDCs are Style B and NACs are Style Y. Class A operation needs the optional CAC-5X Class A Converter Module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize the whole panel:\u003c\/strong\u003e each NAC is rated 3.0 amps special application, but the FLPS-7 supplies 7.0 amps total alarm current per panel, so four circuits cannot all carry 3.0 A at once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery sizing:\u003c\/strong\u003e batteries larger than two 18 Amp Hour units need a separate battery box such as the BB-26 or BB-55F with a CHG-75 or CHG-120F charger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnnunciation:\u003c\/strong\u003e the ANN-BUS connects the ANN-80, ANN-I\/O, ANN-S\/PG, ANN-RLY and ANN-LED modules.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated models\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMS-10UD-7E: same as the MS-10UD-7 but 240 VAC, 50 Hz, 2.20 amps\u003c\/li\u003e\n\u003cli\u003eMS-10UD-3: ten zones with the FLPS-3 supply, 3.0 amps total 24 VDC\u003c\/li\u003e\n\u003cli\u003eFive-zone version: \u003ca href=\"\/products\/fire-lite-ms-5ud-3\"\u003eFire-Lite MS-5UD-3\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSpecifications are taken from Fire-Lite manual 52626 (MS-5UD and MS-10UD Series). Manufacturer specifications are subject to change without notice.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-52626.pdf?v=1794290884\" target=\"_blank\" rel=\"noopener\"\u003eMS-5UD \u0026amp; MS-10UD Series Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan the MS-10UD-7 be wired Class A?\u003c\/strong\u003e\u003cbr\u003eYes, with the optional CAC-5X Class A Converter Module; IDCs are Style B and NACs Style Y as standard.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre batteries included?\u003c\/strong\u003e\u003cbr\u003eNo. Batteries must be ordered separately. The cabinet holds two 18 Amp Hour batteries, and the charger supports up to 26 Amp Hour.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat if I need larger batteries?\u003c\/strong\u003e\u003cbr\u003eBatteries larger than 18 Amp Hour need a separate battery box such as the BB-26 or BB-55F, with a CHG-75 or CHG-120F charger for higher capacities.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much current can each NAC carry?\u003c\/strong\u003e\u003cbr\u003eUp to 3 amps per NAC, within the 7.0 amps total supplied by the FLPS-7 power supply.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132870852832,"sku":"MS-10UD-7","price":1393.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-control-panels-default-title-fire-lite-ms-10ud-7-10-zone-conventional-fire-control-panel-34052884988128.jpg?v=1763277728"},{"product_id":"fire-lite-ecc-50-100-emergency-command-center","title":"Fire-Lite ECC-50\/100 Emergency Command Center","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite ECC-50\/100\u003c\/strong\u003e (also written ECC-50) is a multipurpose emergency voice evacuation panel (Primary Operating Console) for fire applications, mass notification applications, or both, with a built-in 25 Vrms 50 watt amplifier and a single speaker circuit as standard.\u003c\/p\u003e\n\u003cp\u003eThe ECC-50\/100 comes with fourteen field programmable messages of up to 60 seconds each, built-in field configurable pre- and post-announce tone generators, an integral supervised microphone, and a fully supervised notification appliance circuit with 2.0 amps of synchronized NAC power. A secondary 50 watt amplifier (ECC-50W-25V or ECC-50W-70V) can be added for single-circuit backup or to raise the system to two speaker circuits and 100 watts; an optional ECC-CE6 module expands the panel to a maximum of eight speaker circuit outputs. All speaker output circuits can be wired Style Y (Class B) or Style Z (Class A). For fire protection applications the ECC-50\/100 is an adjunct (slave) to any UL certified FACP via reverse polarity or contact closure, and can be used as a stand-alone unit for non-fire applications. Seamless integration is available by direct serial activation from an ES-200X, MS-9600(UD)LS or MS-9200UDLS over the ANN\/ACS (EIA-485) link; other panels drive the eight onboard command input circuits. The system expands with up to eight external remote consoles and up to eight distributed audio amplifiers on the external data and audio riser buses. All programming is done through a built-in programming utility accessed from a laptop.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuilt-in audio power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 watts, 25 Vrms; expandable to 100 watts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker circuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 built in (second requires the optional amplifier); expandable to 8 with ECC-CE6; each Style Y (Class B) or Style Z (Class A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker circuit rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e25 Vrms @ 2 amps max, maximum load impedance 12.5 ohms; 70.7 Vrms @ 700 mA max with maximum load impedance 100 ohms using the ECC-XRM-70V conversion transformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker output power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 watts (10 watts when background music is employed)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400 Hz – 4,000 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker circuit capacitance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMaximum total 250 µF per speaker circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker circuit EOL\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15k ohm, 1 watt (P\/N ELR-15K) required for Style Y (Class B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMessages\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14 recorded, field selectable, up to 60 seconds each; custom recording via local microphone, USB port or external audio input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNotification appliance circuit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne Style Y (Class B) or Style Z (Class A); nominal 24 VDC; 2.0 A special application, 200 mA regulated; maximum wiring impedance 1 ohm; power-limited (Class 2), supervised; EOL 4.7k ohm ½ watt (P\/N 71252) for Style Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCommand input circuits\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEight; CMD1 and CMD2 field selectable for 12 or 24 VDC NAC reverse polarity or contact closure, CMD3–CMD8 contact closure only; operating range 10.5–29 VDC; reverse polarity current 1.6 mA max; contact closure current 6.6 mA max (requires 4.7k ohm ½ watt EOL, P\/N 27072); maximum wiring impedance 200 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eForm-C relays\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eThree — AC power loss, system trouble, and MNS active; each rated 2.0 amps @ 30 VDC (resistive), 0.5 amps @ 30 VAC (resistive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpecial application (auxiliary) power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 mA @ 24 VDC, power-limited; for addressable modules and end-of-line power supervision relays\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExternal operator interface power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNominal 24 VDC, 0.80 amps maximum; non-resettable, power-limited, non-supervised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpeaker volume control override\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStyle Y or Style Z; nominal 24 VDC; 0.25 amps maximum; EOL 4.7k ohm ½ watt (P\/N 71252)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNAC follower \/ remote sync\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTrigger input 9 to 32 VDC, 24 VDC rated; 10 mA input draw in alarm at rated voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNight ring input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eContact closure, isolated and non-supervised; 3.8 mA maximum; maximum wiring impedance 30k ohms; minimum isolation withstand 1500 Vrms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExternal audio input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInput impedance 8.5k ohms nominal @ 1 kHz; 700 mV rms maximum; 0.1 mA maximum @ 700 mV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAC power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 VAC, 60 Hz, 3.5 amps; minimum #14 AWG (2.00 mm²) with 600 V insulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLead-acid only; float charge voltage 27.3 V; maximum charge current 1.0 amp; maximum battery charge capability 26 AH; minimum battery size 12 Amp Hour; ECC cabinet holds a maximum 18 AH battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHistory log\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 events\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFully loaded system capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1100 watts total distributed audio power; 24 speaker circuits; 8 remote consoles; 8 distributed audio amplifiers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBackbox\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.0\" (48.26 cm) high × 16.65\" (42.29 cm) wide × 5.20\" (13.23 cm) deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDoor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.26\" (48.92 cm) high × 16.82\" (42.73 cm) wide × 0.12\" (0.30 cm) deep\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase unit 27.85 lbs. (12.63 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating environment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0–49°C \/ 32–120°F, relative humidity 93% ± 2% RH (noncondensing) at 32°C ± 2°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL 864; UL 2572; UFC 4-021-01; IBC 2012, 2009, 2006, 2003, 2000 (seismic); CBC 2007 (seismic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency certifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL\/ULC certified S2424; CSFM 6911-0075:0226; NYC Fire Dept. Certificate of Approval #6152; FM Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackground music costs output:\u003c\/strong\u003e speaker circuit output power is 50 watts, but drops to 10 watts when background music is employed. Design the speaker load against 10 watts if music is part of the application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery minimum is 12 AH, not 7:\u003c\/strong\u003e the charger supports up to 26 AH, but the ECC cabinet holds a maximum 18 AH battery, and the minimum battery size is 12 Amp Hour. Larger batteries need an external CHG-75 or CHG-120F charger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo different EOL resistors:\u003c\/strong\u003e speaker circuits use a 15k ohm 1 watt ELR-15K, while the NAC and speaker volume control override use 4.7k ohm ½ watt (P\/N 71252). Command input contact-closure circuits call for a 4.7k ohm ½ watt resistor under a different part number, P\/N 27072. Do not standardize on one resistor across the panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot a fire alarm control panel:\u003c\/strong\u003e for fire protection applications the ECC-50\/100 is an adjunct (slave) to a UL certified FACP. Stand-alone operation is for non-fire applications only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMass notification changes the inputs:\u003c\/strong\u003e when the system is programmed for Mass Notification, CMD1 and CMD2 are programmed for reverse polarity only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 volt operation:\u003c\/strong\u003e the primary amplifier reaches 70.7 Vrms only with the ECC-XRM-70V transformer plugged into J12 of the main control board, or by choosing the ECC-50W-70V for the secondary amplifier. Speaker wiring remains supervised in standby, alarm and during background music with the optional transformer installed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeismic:\u003c\/strong\u003e certified for seismic applications with the appropriate mounting kit — SEISKIT-COMMENC, which includes a battery bracket for two 12 AH or 18 AH batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eECC-50\/100E\u003c\/strong\u003e — export version, 240 VAC, 50 Hz, 2.0 amps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECC-CE6\u003c\/strong\u003e — speaker circuit\/zone expander module providing up to six additional Style Y or Style Z speaker circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/fire-lite-ecc-50w-25v\"\u003eECC-50W-25V \/ ECC-50W-70V\u003c\/a\u003e\u003c\/strong\u003e — 50 watt secondary amplifier modules at 25 V or 70 V; add a second speaker circuit or serve as a backup amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECC-XRM-70V\u003c\/strong\u003e — 70 V transformer conversion module for the primary amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECC-LOC \/ ECC-RPU \/ ECC-RM\u003c\/strong\u003e — local operator console, remote page unit and remote microphone; up to eight remote consoles in any combination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECC-50DA \/ ECC-125DA \/ ECC-50BDA\u003c\/strong\u003e — distributed audio amplifiers of 50, 125 and 100 watts; up to eight in any combination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eECC-FFT\u003c\/strong\u003e — firefighter telephone system option.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs the ECC-50\/100 a fire alarm control panel?\u003c\/strong\u003e\u003cbr\u003eNo. For fire protection applications it is an adjunct (slave) to a UL certified FACP; stand-alone operation is for non-fire applications only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat battery size does it need?\u003c\/strong\u003e\u003cbr\u003eLead-acid only, with a minimum of 12 Amp Hour. The cabinet holds a maximum 18 AH battery.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms data sheet \"ECC-50\/100(E) Emergency Command Center,\" document DF-60734:B1 (8\/15\/2018). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-df-60734.pdf?v=1794291248\" target=\"_blank\" rel=\"noopener\"\u003eECC-50\/100 Emergency Command Center — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132871049440,"sku":"ECC-50\/100","price":2843.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-control-panels-default-title-fire-lite-ecc-50-100-emergency-command-center-31896796791008.jpg?v=1794753762"},{"product_id":"fire-lite-bg-12lob-dual-action-pull-station","title":"Fire-Lite BG-12LOB Dual Action Pull Station, Key Lock, Outdoor Listed with Backbox and Gasket","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite BG-12LOB\u003c\/strong\u003e — dual-action manual pull station certified for outdoor use, supplied with an outdoor-rated backbox and sealing gasket.\u003c\/p\u003e\u003cp\u003eFire-Lite decodes its own suffixes: BG-12 is the dual-action station with a hex lock; BG-12L is the same with a key lock; BG-12LOB is a BG-12L with the outdoor certification, the backbox and the gasket included. The box supplied is the plastic SB-I\/O, so this is a complete assembly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePush in then pull down; the handle latches and ACTIVATED appears in yellow\u003c\/li\u003e\n\u003cli\u003eNormally open, gold-plated switch contacts rated 0.25 A at 30 VAC or VDC\u003c\/li\u003e\n\u003cli\u003eFour-position terminal strip with captive 8\/32 screws, accepts up to 12 AWG\u003c\/li\u003e\n\u003cli\u003eStation 5.5 \" × 4.121 \" × 1.39 \"; SB-I\/O backbox 5.601 × 4.222 × 1.439 \"\u003c\/li\u003e\n\u003cli\u003eMeets the ADA 5 lb maximum pull force and UL 38; Braille on the handle\u003c\/li\u003e\n\u003cli\u003eC(UL)US S711, FM approved, CSFM 7150-0075:184, MEA 67-02-E\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWatch for BG-12LO, which carries the same outdoor certification but ships without the backbox. BG-12L is the indoor key-lock station, BG-12LA adds auxiliary contacts, and the addressable equivalent is the BG-12LX.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-DF_52004.pdf?v=1794294765\" target=\"_blank\" rel=\"noopener\"\u003eBG-12 Series Manual Fire Alarm Pull Stations — Data Sheet DF-52004 (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat are the switch contacts rated for?\u003c\/strong\u003e\u003cbr\u003eThe BG-12 Series switch contacts are normally open, gold plated and rated 0.25 A at 30 VAC or VDC.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the station reset?\u003c\/strong\u003e\u003cbr\u003eBG-12 Series stations are reset with a key or hex; after operation they cannot be restored to normal except by using the key or hex.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan a BG-12 Series station be semi-flush mounted?\u003c\/strong\u003e\u003cbr\u003eYes. BG-12 Series stations can be surface mounted on an SB-10 or SB-I\/O box, or semi-flush mounted to a single-gang, double-gang or 4 in. square box, with an optional BG12TR trim ring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich panels is it for?\u003c\/strong\u003e\u003cbr\u003eBG-12 Series stations are non-coded and provide a normally open alarm initiating input to conventional fire alarm control panels.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132871082208,"sku":"BG-12LOB","price":139.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-pull-stations-default-title-fire-lite-bg-12lob-dual-action-pull-station-31896794497248.jpg?v=1793783241"},{"product_id":"fire-lite-i300-isolator-module","title":"Fire-Lite I300 SLC Fault Isolator Module","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite I300\u003c\/strong\u003e — fault isolator module that automatically disconnects a wire-to-wire short on an addressable SLC loop and reconnects the section once the short clears.\u003c\/p\u003e\u003cp\u003eIsolators sit between groups of devices so a short takes out only the segment between two of them instead of the whole loop, and they are what makes true Style 7 operation possible. The I300 needs no address and no external supply: it draws power from the SLC, opens below about four volts, and restores itself with no reset.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating voltage 15 to 32 VDC peak, powered from the SLC\u003c\/li\u003e\n\u003cli\u003eStandby 450 µA maximum when not isolating; 17 mA maximum while isolating\u003c\/li\u003e\n\u003cli\u003eMaximum 25 addressable devices between isolators, a B224RB relay base counting as 2.5\u003c\/li\u003e\n\u003cli\u003eYellow LED pulses when normal, steady while a short is isolated\u003c\/li\u003e\n\u003cli\u003e32°F to 120°F, 5 oz; mounts to a 4\" square box at least 2 1\/8\" deep\u003c\/li\u003e\n\u003cli\u003eUL S2424, FM approved, CSFM 7300-0075:0159, MEA 3-94-E\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eI300A is the same module carrying ULC certification rather than UL, so check which the job needs. B224BIA is the isolator base, doing the same work inside a detector base; SMB500 is the optional surface backbox.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132871114976,"sku":"I300","price":85.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-modules-default-title-fire-lite-i300-isolator-module-34052818731232.jpg?v=1793783825"},{"product_id":"fire-lite-osi-ri-fl-intelligent-beam-smoke-detector","title":"Fire-Lite OSI-RI-FL Intelligent Beam Smoke Detector","description":"\u003ch2\u003eFire-Lite OSI-RI-FL Intelligent Single-Ended Reflective Imaging Beam Smoke Detector, UL Certified\u003c\/h2\u003e\u003cdiv class=\"ths-mfr-data\"\u003e\n\u003cp\u003eOSI-RI-FL: Intelligent Imaging Beam Smoke Detector Including Reflector, Fire Lite\u003c\/p\u003e\n\u003cp\u003eThe OSI-RI-FL intelligent addressable reflector-type linear optical beam smoke detector is uniquely suited for protecting large open areas with high ceilings, where spot-type smoke detectors are difficult to install and maintain. Ideal applications are warehouses, atriums, aircraft hangers, sporting arenas and concert halls. The beam operates primarily on the principle of light obscuration using infrared. The OSI-RI-FL detector is a combined transmitter\/receiver that can be directly connected to an intelligent detector circuit in LiteSpeed® or CLIP mode.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoop-based unit\u003c\/li\u003e\n\u003cli\u003eCombined transmitter\/receiver unit\u003c\/li\u003e\n\u003cli\u003eWide 12° field of view\u003c\/li\u003e\n\u003cli\u003eFast, easy, and intuitive beam alignment indicated by LED directional arrows\u003c\/li\u003e\n\u003cli\u003e50° horizontal and 20° vertical beam adjustment\u003c\/li\u003e\n\u003cli\u003eLong range coverage of 16-328 ft (5-100m) is standard- no separate long-range kit required\u003c\/li\u003e\n\u003cli\u003eAutomatic sensitivity threshold level setting\u003c\/li\u003e\n\u003cli\u003eResistant to building movement- tolerates +\/- 1° movement\u003c\/li\u003e\n\u003cli\u003eResistant to strong light sources- does not alarm when saturated by sunlight\u003c\/li\u003e\n\u003cli\u003eResistant to solid object intrusion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/DF_61043.pdf\" target=\"_blank\" rel=\"noopener\"\u003eOSI-RI-FL Intelligent Beam Detector Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/manuals-and-guides\/installation-guides\/E56-6584.pdf\" target=\"_blank\" rel=\"noopener\"\u003eOSI-RI-FL Intelligent Beam Detector Installation Guide\u003c\/a\u003e (Installation Manual)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/manuals-and-guides\/installation-guides\/I56-6584.pdf\" target=\"_blank\" rel=\"noopener\"\u003eOSI-RI-FL Intelligent Beam Detector Quick Start Guide\u003c\/a\u003e (Installation Manual)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs a reflector included?\u003c\/strong\u003e\u003cbr\u003eYes. The OSI-RI-FL is a combined transmitter\/receiver supplied with its reflector, so only the head unit needs to be wired.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat range does it cover?\u003c\/strong\u003e\u003cbr\u003e16 to 328 ft (5 to 100 m) as standard, with no separate long-range kit required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many can go on one SLC loop?\u003c\/strong\u003e\u003cbr\u003eCurrent draw limits it to up to 4 detectors per loop on a dedicated circuit on Fire-Lite panels; it connects in LiteSpeed or CLIP mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the operating voltage?\u003c\/strong\u003e\u003cbr\u003eNominal 24 VDC (15 to 32 VDC). Maximum standby current is 14 mA at 24 VDC. The built-in imager heater requires an external power supply.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132871213280,"sku":"OSI-RI-FL","price":1396.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-beam-detectors-default-title-fire-lite-osi-ri-fl-intelligent-beam-smoke-detector-31896817500384.jpg?v=1793783342"},{"product_id":"fire-lite-ann-lc-lite-connect-fiber-module","title":"Fire-Lite ANN-LC Lite-Connect Fiber Module","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite ANN-LC\u003c\/strong\u003e is the Lite-Connect fiber module. It allows an MS-9050UD to act as a shared central station communicator for several MS-9050UD and MS-9200UDLS fire alarm control panels, so one panel can report for the whole system.\u003c\/p\u003e\u003cp\u003eThe panels are linked with fiber-optic connections, which also avoids ground-fault and lightning problems between buildings. The module connects to the panel's ANN-BUS and needs only minimal programming.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEach panel in the network, main and remote, needs its own ANN-LC module\u003c\/li\u003e\n\u003cli\u003eSupports up to 16 remote panels (MS-9050UD and MS-9200UDLS)\u003c\/li\u003e\n\u003cli\u003eFiber panel-to-panel links limit ground-fault and lightning exposure\u003c\/li\u003e\n\u003cli\u003eMain panel reports up to 50 points \/ 20 zones for the MS-9050UD and 198 points \/ 99 zones for the MS-9200UDLS\u003c\/li\u003e\n\u003cli\u003eClass B or Class A operation for survivability\u003c\/li\u003e\n\u003cli\u003eEach panel needs a unique node address set in programming\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCommunication module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMS-9050UD Series fire alarm control panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApprovals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL S2424; CSFM 7300-0075:0231; FM Approved; FDNY COA #6177\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132871278816,"sku":"ANN-LC","price":341.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-modules-default-title-fire-lite-ann-lc-lite-connect-fiber-module-31896797249760.jpg?v=1793785055"},{"product_id":"fire-lite-lcd-80f-lcd-remote-fire-annunciator","title":"Fire-Lite LCD-80F 80-Character LCD Remote Fire Annunciator","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite LCD-80F\u003c\/strong\u003e — 80-character backlit LCD remote fire annunciator for MS-9200UD Series and MS-9600 Series control panels.\u003c\/p\u003e\u003cp\u003eThe LCD-80F mirrors everything the host panel display shows at a remote point, and adds the control switches a responding officer needs there, not at the panel. It connects to the panel EIA-485 terminal port and needs no programming, taking its text, device type identifiers and custom alpha labels from the panel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e80-character backlit display mimicking all host panel display information\u003c\/li\u003e\n\u003cli\u003eSwitches for System Acknowledge, Signal Silence, Drill and Reset, with enable key\u003c\/li\u003e\n\u003cli\u003eStatus LEDs for Power, Alarm, Trouble, Supervisory and Alarm Silenced, plus piezo\u003c\/li\u003e\n\u003cli\u003eUp to 32 units on one panel EIA-485 terminal port\u003c\/li\u003e\n\u003cli\u003eSix wires: four for EIA-485 in and return, two for 24 VDC power\u003c\/li\u003e\n\u003cli\u003eSemi-flush to a three-gang box at least 2.188 in. deep, or surface to an SBB-3\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCan sit up to 6,000 ft. (1,828.8 m) from the panel; the 10103 box and SBB-3 backbox are ordered separately. LCD-80FC is the ULC sibling and not a drop-in equivalent: it is documented for MS-9600 Series panels and its switches are piezo silence and lamp test only.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-df-52185.pdf?v=1794313897\" target=\"_blank\" rel=\"noopener\"\u003eLCD-80F Remote Fire Annunciator — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich panels is the LCD-80F compatible with?\u003c\/strong\u003e\u003cbr\u003eFire-Lite documents it for the MS-9200UD Series and MS-9600 Series fire alarm control panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the LCD-80F need programming?\u003c\/strong\u003e\u003cbr\u003eNo. It connects to the panel's EIA-485 terminal port (TB7) and mimics the host panel display, so no programming is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many annunciators can be connected, and how far away?\u003c\/strong\u003e\u003cbr\u003eUp to 32 LCD-80F units per panel. Each can be up to 6,000 ft (1,828.8 m) from the panel on the EIA-485 circuit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat backbox does it need?\u003c\/strong\u003e\u003cbr\u003eSemi-flush mount it to a three-gang box at least 2.188 in. deep (Fire-Lite 10103), or surface mount it on the SBB-3 surface backbox.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132871573728,"sku":"LCD-80F","price":778.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-annunciators-default-title-fire-lite-lcd-80f-lcd-remote-fire-annunciator-35152618520800.jpg?v=1793777800"},{"product_id":"fire-lite-bg-12lo-dual-action-pull-station","title":"Fire-Lite BG-12LO Dual Action Manual Pull Station, Outdoor Listed, Key Lock, Backbox Not Included","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite BG-12LO\u003c\/strong\u003e is a dual-action, non-coded manual fire alarm pull station with a key-lock reset and approval for outdoor use. It gives a fire alarm control panel a normally open manual alarm initiating input and is supplied without a backbox. Installers use it at building exits and other exterior locations; the BG-12LOB is the same station supplied with the outdoor backbox and sealing gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual action (push in, pull down); handle latches down and shows ACTIVATED in yellow\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSwitch\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNormally open, gold-plated contacts, 0.25 A at 30 VAC or VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReset\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eKey lock, quarter turn; closing the cover resets the switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTerminals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFour-position strip, field wiring up to 12 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHousing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRed polycarbonate, 5.5 in. H x 4.121 in. W x 1.39 in. D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL 38; C(UL)US S711, FM approved, CSFM 7150-0075:184, MEA 67-02-E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePull force\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeets ADA 5 lb maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBraille text and directional arrows on the operating handle\u003c\/li\u003e\n\u003cli\u003eCan be opened for inspection without initiating an alarm\u003c\/li\u003e\n\u003cli\u003eSurface mount with SB-10 or SB-I\/O backbox, or semi-flush on a single-gang, double-gang or 4 in. square box\u003c\/li\u003e\n\u003cli\u003eOptional BG12TR trim ring for semi-flush mounting\u003c\/li\u003e\n\u003cli\u003eKey set of two (17003) included with key-lock models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-DF_52004.pdf?v=1794294765\" target=\"_blank\" rel=\"noopener\"\u003eBG-12 Series Manual Fire Alarm Pull Stations (DF-52004) — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs a backbox included with the BG-12LO?\u003c\/strong\u003e\u003cbr\u003eNo. For outdoor use Fire-Lite requires an outdoor-approved backbox such as the WBB; the BG-12LO with a WBB is the BG-12LOB.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow is the station reset?\u003c\/strong\u003e\u003cbr\u003eInsert the key, turn it a quarter turn and open the front cover; the handle springs back, and closing the cover resets the alarm switch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it be opened without causing an alarm?\u003c\/strong\u003e\u003cbr\u003eYes. The station can be opened for inspection and maintenance without initiating an alarm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it connect to?\u003c\/strong\u003e\u003cbr\u003eIt gives a fire alarm control panel one normally open alarm input. The four-position terminal strip accepts field wiring up to 12 AWG.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132871672032,"sku":"BG-12LO","price":123.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-pull-stations-default-title-fire-lite-bg-12lo-dual-action-pull-station-31896795873504.jpg?v=1769663199"},{"product_id":"fire-lite-h365-iv-addressable-heat-detector-ivory","title":"Fire-Lite H365-IV Addressable Fixed Temperature Heat Detector, 135F, Ivory, LiteSpeed and CLIP","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite H365-IV\u003c\/strong\u003e — addressable plug-in thermal detector, fixed temperature, factory preset to 135°F (57°C), in ivory.\u003c\/p\u003e\u003cp\u003eHeat detectors protect property rather than life, and suit places where smoke detection would nuisance-alarm: boiler rooms, kitchens, loading docks, parking decks. The ivory suffix is not only a colour. Per the data sheet, -IV models run both LiteSpeed and CLIP while the white H365 is LiteSpeed only, which decides whether it works on an older panel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFixed-temperature set point 135°F (57°C), thermistor sensing, no rate-of-rise element\u003c\/li\u003e\n\u003cli\u003eUL approved 50 ft (15.24 m) centre-to-centre; FM approved 25 × 25 ft\u003c\/li\u003e\n\u003cli\u003e15 to 32 VDC peak; 200 µA standby average, 4.5 mA maximum at 24 VDC\u003c\/li\u003e\n\u003cli\u003eOperating range minus 4°F to 100°F, 10 to 93% RH non-condensing\u003c\/li\u003e\n\u003cli\u003eUL\/ULC S2517, FM, CSFM 7272-0075:0501; direct replacement for the H355 Series\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePick the right member: H365R-IV is rate-of-rise at 15°F per minute, H365HT-IV the 190°F high-temperature model, H365 the white LiteSpeed-only version, H365A-IV the ULC variant. Bases and the RA100Z remote annunciator carry their own numbers.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-H365_DF-61011.pdf?v=1794294795\" target=\"_blank\" rel=\"noopener\"\u003eH365 Series Addressable Heat Detectors — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-I56-6525.pdf?v=1794294798\" target=\"_blank\" rel=\"noopener\"\u003eH365(A) Series Addressable Thermal Detectors Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill it work on my Fire-Lite panel?\u003c\/strong\u003e\u003cbr\u003eThe -IV models support both LiteSpeed and CLIP protocols, while the white H365 is LiteSpeed only. It is for use with Fire-Lite addressable fire alarm control panels.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich bases can it use?\u003c\/strong\u003e\u003cbr\u003eFire-Lite lists the B300-6-IV flanged base, B501-IV flangeless base, B224RB-IV relay base, B224BI-IV isolator base and the B200S series sounder bases.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat happens if the panel does not support programmable heat settings?\u003c\/strong\u003e\u003cbr\u003eThe H365 and H365-IV default to a 135°F fixed heat detector.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it replace the H355?\u003c\/strong\u003e\u003cbr\u003eYes. The H365 Series is a direct replacement for the H355 Series.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132871737568,"sku":"H365-IV","price":190.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-heat-detectors-default-title-fire-lite-h365-iv-addressable-heat-detector-ivory-31896802230496.jpg?v=1793777431"},{"product_id":"fire-lite-h365r-addressable-heat-detector","title":"Fire-Lite H365R Addressable Rate-of-Rise Heat Detector, 135F Fixed, White, LiteSpeed Only","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite H365R\u003c\/strong\u003e — white addressable plug-in thermal detector whose default setting is rate of rise together with a 135 °F fixed temperature element.\u003c\/p\u003e \u003cp\u003eAll six H365 models share one thermistor sensing circuit and are field programmable from the control panel as 135 °F fixed, as rate of rise plus 135 °F fixed, or as 190 °F high temperature. The catalogue number sets the behaviour it falls back to on a panel without that feature, and for the H365R that is rate of rise plus 135 °F fixed.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003eRate of rise responds to more than 15 °F per minute, with a 135 °F set point\u003c\/li\u003e\n\u003cli\u003eLiteSpeed protocol only; the ivory H365R-IV is the version that also runs CLIP\u003c\/li\u003e\n\u003cli\u003e15 to 32 volts DC peak; 200 µA standby at 24 VDC, 4.5 mA maximum\u003c\/li\u003e\n\u003cli\u003eUL 521 certified, UL approved for 50 ft. spacing, FM for 25 by 25 ft.\u003c\/li\u003e\n\u003cli\u003eInstallation temperature minus 4 to 100 °F, 10 to 93 percent RH\u003c\/li\u003e\n\u003cli\u003eRotary decimal addressing; 2.0 in. high in a B300-6 base\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eH365 is the 135 °F fixed model and H365HT the 190 °F one. It plugs into a separate base such as the B300-6, and Fire-Lite documents disagree over whether one ships with it, so confirm before ordering.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-H365_DF-61011.pdf?v=1794294795\" target=\"_blank\" rel=\"noopener\"\u003eH365 Series Addressable Heat Detectors — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-I56-6525.pdf?v=1794294798\" target=\"_blank\" rel=\"noopener\"\u003eH365 Series Addressable Thermal Detectors Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich panels and protocol does the H365R use?\u003c\/strong\u003e\u003cbr\u003eIt is exclusively for Fire-Lite addressable panels and runs LiteSpeed only. The ivory H365R-IV runs both LiteSpeed and CLIP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat base does it plug into?\u003c\/strong\u003e\u003cbr\u003eThe H365R plugs into a separate base, such as the B300-6 6 in. flanged base or the B501-WHITE 4 in. flangeless base. Fire-Lite lists the bases as separate catalog items.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the rate-of-rise setting work?\u003c\/strong\u003e\u003cbr\u003eThe H365R responds to a temperature rise of more than 15°F (8.3°C) per minute and also has a 135°F (57°C) fixed setting. On panels without programmable heat detection, it defaults to 135°F fixed plus rate of rise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it replace the H355R?\u003c\/strong\u003e\u003cbr\u003eYes. Fire-Lite describes the H365 Series as a direct replacement for the H355 Series.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132871770336,"sku":"H365R","price":83.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-heat-detectors-default-title-fire-lite-h365r-addressable-heat-detector-31896801607904.jpg?v=1793777290"},{"product_id":"fire-lite-sbb-3-436141-surface-mount-backbox","title":"Fire-Lite SBB-3 (436141) Surface Mount Backbox","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite SBB-3\u003c\/strong\u003e is a three-gang surface-mount backbox designed to hold the LCD-80F fire annunciator on the wall surface. It conceals the wired connections and needs little labor to install.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThree-gang metal box for surface mounting\u003c\/li\u003e\n\u003cli\u003eDesigned for the LCD-80F annunciator\u003c\/li\u003e\n\u003cli\u003eConceals field wiring connections\u003c\/li\u003e\n\u003cli\u003eSurface installation with minimal labor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSurface-mount backbox\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Gangs\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSilver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132871966944,"sku":"SBB-3","price":71.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-backboxes-default-title-fire-lite-sbb-3-436141-surface-mount-backbox-32585379512544.jpg?v=1793786816"},{"product_id":"fire-lite-sd365r-photoelectric-smoke-detector","title":"Fire-Lite SD365R Intelligent Photoelectric Smoke Detector with Remote Test, for DNR\/DNRW Duct Housings, White","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite SD365R\u003c\/strong\u003e is a white addressable photoelectric smoke sensor with remote test capability, for DNR and DNRW duct smoke detector housings.\u003c\/p\u003e\u003cp\u003eThe R suffix is the whole difference within the family: this sensor can be commanded to test itself from the control panel, which is what a detector sealed inside a duct housing needs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e15 to 32 VDC peak from the SLC; 200 µA maximum average standby at 24 VDC; 4.5 mA maximum when on\u003c\/li\u003e\n\u003cli\u003eLiteSpeed protocol only on this model; the ivory SD365R-IV is the CLIP and LiteSpeed device\u003c\/li\u003e\n\u003cli\u003eSensitivity 0.5% to 4.0% per foot obscuration, factory preset at 1.5% nominal; meets UL 268 7th edition\u003c\/li\u003e\n\u003cli\u003e–4°F to 158°F when installed in a DNR or DNRW housing; 10% to 93% RH noncondensing\u003c\/li\u003e\n\u003cli\u003eRated velocity range 0 to 4000 ft\/min, suitable for installation in ducts\u003c\/li\u003e\n\u003cli\u003eUL and ULC certification S1059, FM approved, CSFM 7272-0075:0502\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEasily confused inside its own family: SD365 is the same sensor without remote test, SD365T adds a 135°F thermal element, and SD365RA is the ULC version for the DNRA housing. A base such as B300-6 or B501 is ordered separately.\u003c\/p\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eThe SD365R plugs into a DNR or DNRW housing. Within its own family:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-sd365r-iv-replacement-duct-smoke-detector-ivory\"\u003eSD365R-IV\u003c\/a\u003e: the ivory version, which operates on CLIP and LiteSpeed.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-sd365-addressable-smoke-detector\"\u003eSD365\u003c\/a\u003e: the same sensor without remote test.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/fire-lite-sd365t-addressable-smoke-and-thermal-detector\"\u003eSD365T\u003c\/a\u003e: adds a 135°F thermal element.\u003c\/li\u003e\n\u003cli\u003eSD365RA is the ULC version for the DNRA housing.\u003c\/li\u003e\n\u003cli\u003eA base such as B300-6 or B501 is ordered separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/system-sensor-dnr-duct-detector\"\u003eDNR\u003c\/a\u003e and \u003ca href=\"\/products\/system-sensor-dnrw-duct-smoke-detector-detector-head-sold-separately\"\u003eDNRW\u003c\/a\u003e duct housings are separate orders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat does the R in SD365R mean?\u003c\/strong\u003e\u003cbr\u003eRemote test: the sensor can be commanded to test itself from the control panel, which a detector sealed inside a duct housing needs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat protocol does the white SD365R use?\u003c\/strong\u003e\u003cbr\u003eLiteSpeed only. The ivory SD365R-IV is the CLIP and LiteSpeed device.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-I56-6524.pdf?v=1794320559\" target=\"_blank\" rel=\"noopener\"\u003eSD365R \/ SD365R-IV Installation and Maintenance Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132871999712,"sku":"SD365R","price":97.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-smoke-detectors-default-title-fire-lite-sd365r-photoelectric-smoke-detector-31896819794144.jpg?v=1769662275"},{"product_id":"fire-lite-h365r-iv-addressable-heat-detector-ivory","title":"Fire-Lite H365R-IV Addressable Rate-of-Rise Heat Detector, Ivory, LiteSpeed and CLIP","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite H365R-IV\u003c\/strong\u003e — ivory addressable plug-in thermal detector, rate-of-rise with a 135 °F fixed element, supporting both LiteSpeed and CLIP.\u003c\/p\u003e\u003cp\u003eA rate-of-rise detector alarms on how fast the air is heating rather than waiting for an absolute threshold, catching a fast-developing fire earlier, with the fixed element as the backstop for a slow build. The H365 Series replaces the H355 Series.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRate-of-rise at 15 °F (8.3 °C) per minute; defaults to 135 °F fixed plus rate-of-rise on panels without programmable heat\u003c\/li\u003e\n\u003cli\u003eThe -IV suffix carries dual protocol as well as colour: LiteSpeed or CLIP, where the white H365R is LiteSpeed only\u003c\/li\u003e\n\u003cli\u003e15 to 32 VDC peak; standby 200 µA at 24 VDC; maximum 4.5 mA at 24 VDC\u003c\/li\u003e\n\u003cli\u003eUL approved for 50 ft. center-to-center spacing, FM approved for 25 × 25 ft.\u003c\/li\u003e\n\u003cli\u003eRotary decimal addressing to 159 addresses\u003c\/li\u003e\n\u003cli\u003eDesigned to meet UL 268 7th Edition; UL\/ULC file S2517\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThree heads share this body and only the thermal behaviour differs: H365-IV is fixed at 135 °F with no rate-of-rise, H365HT-IV fixed at 190 °F. H365R is the white version, LiteSpeed only. An A, as in H365RA-IV, is the ULC version.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-H365_DF-61011.pdf?v=1794294795\" target=\"_blank\" rel=\"noopener\"\u003eH365 Series Addressable Heat Detectors — Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-I56-6525.pdf?v=1794294798\" target=\"_blank\" rel=\"noopener\"\u003eH365(A) Series Thermal Detectors Installation Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs a base included?\u003c\/strong\u003e\u003cbr\u003eYes. The data sheet lists the B300-6(A) flanged base as included. Other intelligent bases such as relay, isolator and sounder bases can be used instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich protocols does the H365R-IV support?\u003c\/strong\u003e\u003cbr\u003eThe -IV model supports both LiteSpeed and CLIP. The white H365R is LiteSpeed only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow does the rate-of-rise element work?\u003c\/strong\u003e\u003cbr\u003eIt alarms at a rise of 15 °F (8.3 °C) per minute, with a 135 °F fixed element as backup. On panels without programmable heat, it defaults to 135 °F fixed plus rate-of-rise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the operating temperature range?\u003c\/strong\u003e\u003cbr\u003eThe H365 and H365R Series are rated for -4 °F to 100 °F (-20 °C to 38 °C).\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132872032480,"sku":"H365R-IV","price":182.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-heat-detectors-default-title-fire-lite-h365r-iv-addressable-heat-detector-ivory-31896801214688.jpg?v=1793777392"},{"product_id":"fire-lite-sd365t-addressable-smoke-and-thermal-detector","title":"Fire-Lite SD365T Addressable Photoelectric Smoke Detector with 135F Fixed Thermal, LiteSpeed, White","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite SD365T\u003c\/strong\u003e — white low-profile addressable photoelectric smoke detector with a built-in 135 °F (57 °C) fixed-temperature thermal device, LiteSpeed protocol only.\u003c\/p\u003e\u003cp\u003eThe head plugs into a separate base on the two-wire signalling line circuit and carries its own address, set on rotary decimal switches, so the panel reports an exact location rather than a zone. It runs a test on command from the panel or from a magnet held to the housing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThermal element is fixed temperature at 135 °F; the Product Line entry for this model names no other thermal function\u003c\/li\u003e\n\u003cli\u003eSensitivity 0.5 to 4.0 %\/ft, factory preset at 1.5% nominal\u003c\/li\u003e\n\u003cli\u003e15 to 32 VDC peak; standby 200 µA at 24 VDC, 4.5 mA maximum\u003c\/li\u003e\n\u003cli\u003eOperating temperature 32 to 100 °F, narrower than the plain SD365 at 32 to 122 °F\u003c\/li\u003e\n\u003cli\u003e2.0\" high, the base setting the diameter: 6.1\" on a B300-6, 4\" on a B501\u003c\/li\u003e\n\u003cli\u003eDesigned to meet UL 268 7th Edition; UL\/ULC S1059, FM, CSFM 7272-0075:0502\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSD365 is the same detector without the thermal element, and Fire-Lite lists the series as a direct replacement for the SD355. SD365T-IV is not a colour change: that suffix means CLIP and LiteSpeed, where this part is LiteSpeed only. SD365TA is the ULC version.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between the SD365T and the SD365T-IV?\u003c\/strong\u003e\u003cbr\u003eThe white SD365T runs the LiteSpeed protocol only. The ivory SD365T-IV supports both CLIP and LiteSpeed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does the thermal element do?\u003c\/strong\u003e\u003cbr\u003eThe SD365T adds a built-in 135°F (57°C) fixed-temperature thermal device to the photoelectric smoke chamber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs a base included?\u003c\/strong\u003e\u003cbr\u003eThe detector plugs into a separate base such as the B300-6 (6.1 in. diameter installed) or B501 (4 in.).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the operating temperature range?\u003c\/strong\u003e\u003cbr\u003e32°F to 100°F, narrower than the SD365 photo-only detector at 32°F to 122°F.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132872130784,"sku":"SD365T","price":104.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-smoke-detectors-default-title-fire-lite-sd365t-addressable-smoke-and-thermal-detector-32309096644832.jpg?v=1793778122"},{"product_id":"fire-lite-mrp-2001-pre-action-deluge-control-panel","title":"Fire-Lite MRP-2001 Deluge Preaction Releasing Control Panel, Six Zone, 24V, 120 VAC","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite MRP-2001\u003c\/strong\u003e — six zone deluge and preaction releasing control panel for single and dual hazard water based systems.\u003c\/p\u003e\u003cp\u003eIt detects, signals and releases in one enclosure: conventional initiating devices report to six zones, and four programmable outputs drive either releasing solenoids or notification appliances.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSix programmable Style B (Class B) initiating device circuits; 4.7 kΩ half watt end-of-line resistor, maximum loop resistance 100 Ω\u003c\/li\u003e\n\u003cli\u003eFour programmable Style Y (Class B) outputs, each assignable as a releasing or notification appliance circuit\u003c\/li\u003e\n\u003cli\u003e7.0 A total 24 VDC output current, of which 3.0 A is special application power\u003c\/li\u003e\n\u003cli\u003eAdjustable waterflow discharge timer, two soak timers, cross zone double interlock\u003c\/li\u003e\n\u003cli\u003eThree programmable Form C relays rated 2 A at 30 VDC resistive\u003c\/li\u003e\n\u003cli\u003e120 VAC 60 Hz at 3.66 A; UL 864 9th edition certified and FM approved for NFPA 13, 15 and 16 systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMRP-2001E is the same panel wired for 240 VAC and MRP-2001C the ULC certified Canadian model. MRP-2002 is the agent release panel for clean agent rather than water. Class A wiring needs the CAC-5X module.\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-53040.pdf?v=1794295277\" target=\"_blank\" rel=\"noopener\"\u003eMRP-2001 Series Pre-Action\/Deluge Control Panel Instruction Manual (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAre batteries included?\u003c\/strong\u003e\u003cbr\u003eNo, batteries are ordered separately. The cabinet holds two 18 Ah batteries; the panel supports up to 26 Ah, and larger batteries need a battery box such as the BB-26 or BB-55F with a CHG-75 or CHG-120F charger.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan the circuits be wired Class A?\u003c\/strong\u003e\u003cbr\u003eYes, with the optional CAC-5X Class A converter module, which converts the Style B initiating circuits to Style D and the Style Y outputs to Style Z.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich strobe sync protocols do the outputs support?\u003c\/strong\u003e\u003cbr\u003eNACs can be programmed for System Sensor, Wheelock, Gentex, Faraday or Amseco strobe synchronization.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it support a remote annunciator?\u003c\/strong\u003e\u003cbr\u003eYes. ANN-BUS devices such as the ANN-80 remote LCD annunciator connect to the panel; the MRP-2001C Canadian model ships with an ANN-LED annunciator module.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132872163552,"sku":"MRP-2001","price":1062.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/fire-lite-control-panels-default-title-fire-lite-mrp-2001-pre-action-deluge-control-panel-35022886502624.jpg?v=1793783425"},{"product_id":"fire-lite-cdrm-300-addressable-dual-relay-monitor-module","title":"Fire-Lite CDRM-300 Addressable Dual Relay\/Monitor Module","description":"\u003ch2\u003eFire-Lite CDRM-300 Addressable Dual Relay\/Monitor Module - Two Individual Relay Control And Two Class B Monitor Circuits\u003c\/h2\u003e\u003cdiv class=\"ths-mfr-data\"\u003e\n\u003cp\u003eCDRM-300: Dual RelayMonitor Module, 15 to 32VDC, 24mA, 32 to 120˚F, 4.675x4.275x1.4in\u003c\/p\u003e\n\u003cp\u003eCDRM-300(A) dual relay\/monitor modules are designed for use with Fire-Lite® fire alarm control panels (FACPs). These addressable modules are intended for use in intelligent, 2-wire loops. They includes two individual relay control modules and two Class B monitor modules. Each relay output is intended for Form C switching applications, which do not require wiring supervision for the load circuit. Each monitor input provides an interface between a FACP and one or more normally (NO) contact device.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowered by SLC loop directly, with no external power required\u003c\/li\u003e\n\u003cli\u003eIntegral LEDs blink red during normal operation and turn a steady \u0026amp; red to \u0026amp; indicate alarm\u003c\/li\u003e\n\u003cli\u003eCompatible with LiteSpeed™ and CLIP Systems\u003c\/li\u003e\n\u003cli\u003eAddressable-analog communication\u003c\/li\u003e\n\u003cli\u003eSleek, low-profile design\u003c\/li\u003e\n\u003cli\u003e2-wire SLC connections\u003c\/li\u003e\n\u003cli\u003eAddresses can be viewed and changed without the need for electronic \u0026amp; programmers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/df-60713.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCDRM-300(A) Dual Relay-Monitor Module Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/manuals-and-guides\/installation-guides\/I56-3726-000.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCDRM-300 Multiple Module with Two Relay Outputs and Two Monitor Inputs-Installation Manual\u003c\/a\u003e (Installation Manual)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/brochures\/Isolator_Load_Rating_Table.pdf\" target=\"_blank\" rel=\"noopener\"\u003eIsolator Load Rating Table Brochure\u003c\/a\u003e (Brochure)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132872294624,"sku":"CDRM-300","price":286.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-modules-default-title-fire-lite-cdrm-300-addressable-dual-relay-monitor-module-31896795152608.jpg?v=1793784832"},{"product_id":"fire-lite-sd365co-smoke-and-carbon-monoxide-detector","title":"Fire-Lite SD365CO Smoke and Carbon Monoxide Detector","description":"\u003cp\u003e\u003cstrong\u003eSD365CO\u003c\/strong\u003e — plug-in addressable multi-criteria detector, white, combining four separate sensing elements to provide both fire and carbon monoxide detection while using only one address on the SLC.\u003c\/p\u003e\n\u003cp\u003eThe SD365CO senses multiple components of a fire at once: photoelectric sensors detect airborne particles associated with smoke, thermal sensors detect heat and rate-of-rise against a 135°F fixed temperature threshold, carbon monoxide sensors detect that by-product of fire, and infrared sensors discern light patterns in the environment as an additional data point for alarm determination. For CO, the electrochemical sensing cell creates a separate signal for life safety carbon monoxide detection. Sophisticated algorithms combine the sensor types to deliver heightened immunity to nuisance particulate alongside enhanced sensitivity to real fire, which supports use in applications with moderate to heavy nuisance conditions — theater smoke, for example — that might cause single-sensing detectors to false alarm. Automatic drift compensation is applied to both the smoke and CO sensors, and RealTest CO testing capability is built in. The detector meets UL 268 and UL 521 requirements for fire detection as well as UL 2075 for system-connected life safety carbon monoxide detection.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensing elements\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePhotoelectric, thermal (135°F fixed temperature threshold and rate-of-rise), electrochemical carbon monoxide, and infrared\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSLC addresses used\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLiteSpeed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating voltage range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15 to 32 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating current @ 24 VDC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200 µA (one communication every 5 seconds with green LED blink on communication)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum alarm current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 mA @ 24 VDC (one communication every 5 seconds with red LED solid on)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum current\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.5 mA @ 24 VDC (one communication every 5 seconds with amber LED solid on)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIsolator load rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.0063\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCO alarm threshold — 70 ± 5 ppm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDetector response time 60–240 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCO alarm threshold — 150 ± 5 ppm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDetector response time 10–50 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCO alarm threshold — 400 ± 10 ppm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDetector response time 4–15 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCO cell life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10-year CO cell with end-of-life warning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.7\" (69 mm) installed in a B200S series sounder base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.875\" (175 mm) installed in a B200S series sounder base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.4 oz. (95 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32°F to 100°F (0°C to 38°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating humidity range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15% to 90% relative humidity, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir velocity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 to 4000 ft.\/min. (0 to 1219.2 m\/min.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL 268, UL 521 and UL 2075 certified; per UL 2075 the SD365CO has been tested to the sensitivity limits defined in UL Standard 2034\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAgency certifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUL: S1059; CSFM 7272-0075:0507\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMexico\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNarrower temperature range than a plain photo detector:\u003c\/strong\u003e the SD365CO is rated 32°F to 100°F (0°C to 38°C), not the 32°F to 122°F of the standard SD365. Check the ambient before substituting one for the other.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCO cell is a wear item:\u003c\/strong\u003e the CO cell is rated for 10 years and gives an end-of-life warning. Budget for replacement rather than treating the detector as install-and-forget.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSounder bases give separate fire and CO tones:\u003c\/strong\u003e B200S series intelligent sounder bases are recommended, and can generate a Temporal 3 pattern for fire or a Temporal 4 pattern for CO alarm indication. They recognize the System Sensor synchronization protocol when connected to a power supply or FACP output capable of generating those sync pulses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne address, four sensors:\u003c\/strong\u003e despite combining four sensing technologies, the detector consumes only one address on the SLC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtocol:\u003c\/strong\u003e this white model is a LiteSpeed device. The ivory SD365CO-IV operates in LiteSpeed and CLIP mode, which matters on an SLC forced into CLIP polling by legacy devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBases are separate items:\u003c\/strong\u003e order the mounting base to suit — B501-WHITE (4\"), B300-6 (6\" flanged), B200S-WH or B200S-LF-WH sounder, B224BI-WH isolator or B224RB-WH relay base.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRelated models\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSD365CO-IV\u003c\/strong\u003e — ivory version; operates in LiteSpeed and CLIP mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/system-sensor-b200s-lf-wh-addressable-sounder-base\"\u003eB200S-LF-WH\u003c\/a\u003e\u003c\/strong\u003e — low-frequency intelligent sounder base for sleeping-space applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eB224BI-WH \/ B224RB-WH\u003c\/strong\u003e — isolator base and relay base options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMB600\u003c\/strong\u003e — flanged surface mounting kit; TR300 trim ring, RA100Z remote LED annunciator, M02-04-00 test magnet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many SLC addresses does the SD365CO use?\u003c\/strong\u003e\u003cbr\u003eOne, despite combining four sensing elements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow long does the CO cell last?\u003c\/strong\u003e\u003cbr\u003eThe CO cell is rated for 10 years and gives an end-of-life warning.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eSpecifications taken from the Fire•Lite Alarms data sheet \"SD365CO Multi-Criteria Fire\/CO Detector,\" document DF-62000:A (4\/24\/2019). Manufacturer specifications are subject to change without notice.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eDocuments\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-SD365CO_Datasheet_DF_62000.pdf?v=1794292074\" target=\"_blank\" rel=\"noopener\"\u003eSD365CO Multi-Criteria Fire\/CO Detector â€” Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/files\/tfas-SD365CO_Manual_I56-6601.pdf?v=1794292077\" target=\"_blank\" rel=\"noopener\"\u003eSD365CO Installation and Maintenance Instructions (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132872786144,"sku":"SD365CO","price":220.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-multi-criteria-detectors-default-title-fire-lite-sd365co-smoke-and-carbon-monoxide-detector-31896821367008.jpg?v=1793777800"},{"product_id":"fire-lite-ann-80-w-lcd-fire-annunciator-white","title":"Fire-Lite ANN-80-W 80-Character Serial LCD Annunciator, White","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite ANN-80-W\u003c\/strong\u003e — white remote 80-character backlit LCD annunciator that mirrors the fire alarm control panel display over the ANN-Bus.\u003c\/p\u003e\u003cp\u003eIt is a remote display and command point, not a panel component. The LCD repeats device type, zone, point-level alarm, trouble and supervisory status and any custom alpha labels, while four keyswitch-protected buttons hand back the critical functions. A two-wire serial ANN-Bus carries data and two more conductors carry 24 VDC.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBacklit 80-character LCD, 20 characters by 4 lines\u003c\/li\u003e\n\u003cli\u003e18 to 28 VDC; 40 mA maximum at 24 VDC, filtered and non-resettable\u003c\/li\u003e\n\u003cli\u003eUp to eight units per panel ANN-Bus, each needing a unique ID number\u003c\/li\u003e\n\u003cli\u003eMay be located up to 6,000 ft (1,800 m) from the panel\u003c\/li\u003e\n\u003cli\u003eAcknowledge, Signal Silence, Drill and Reset switches, each enabled at the panel\u003c\/li\u003e\n\u003cli\u003e5.375\" × 6.875\" × 1.375\", indoor dry location\u003c\/li\u003e\n\u003cli\u003eUL 864 9th Edition; UL S2424, FM approved, CSFM 7120-0075:0211\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eANN-80 without a suffix is the identical unit in red, so colour is the only difference. The backbox ships separately and is colour matched: ANN-SB80KIT-W in white, ANN-SB80KIT-R in red.\u003c\/p\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132872818912,"sku":"ANN-80-W","price":442.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-annunciators-default-title-fire-lite-ann-80-w-lcd-fire-annunciator-white-31896789745888.jpg?v=1793783824"},{"product_id":"fire-lite-crf-300-6-6-form-c-relay-module","title":"Fire-Lite CRF-300-6 6-Form-C Relay Module","description":"\u003cp\u003e\u003cstrong\u003eFire-Lite CRF-300-6\u003c\/strong\u003e is a six-relay addressable control module with six Form-C relays. The control panel switches each set of dry contacts on command, and each contact can be wired normally open or normally closed.\u003c\/p\u003e\u003cp\u003eThe first module is addressed from 01 to 154, and the other five relays take the next five higher addresses automatically. Up to three unused addresses can be disabled. No supervision is provided for the controlled circuit.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix addressable Form-C relay contacts, one isolated dry contact set per address\u003c\/li\u003e\n\u003cli\u003eRemovable plug-in terminal blocks\u003c\/li\u003e\n\u003cli\u003ePanel-controlled green LED per point that can blink, latch on or latch off\u003c\/li\u003e\n\u003cli\u003eRotary address switches; unused addresses may be disabled\u003c\/li\u003e\n\u003cli\u003eMounts one or two modules in an optional BB-X2F cabinet\u003c\/li\u003e\n\u003cli\u003eMounts up to six modules on an optional CHS-6 chassis in a BB-2F cabinet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRelay module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRelays\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 x Form-C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132872851680,"sku":"CRF-300-6","price":514.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-modules-default-title-fire-lite-crf-300-6-6-form-c-relay-module-31896797085920.jpg?v=1763277793"},{"product_id":"fire-lite-cmf-300-6-6-input-class-b-or-3-input-class-a","title":"Fire-Lite CMF-300-6 6-Input (Class B) or 3-Input (Class A)","description":"\u003ch2\u003eFire-Lite CMF-300-6 6-Input (Class B) or 3-Input (Class A) NAC\/Control Module\u003c\/h2\u003e\u003cdiv class=\"ths-mfr-data\"\u003e\n\u003cp\u003eCMF-300-6: Control Module, 6 Circuit, 15 to 32VDC, 35mA, 32 to 120˚F, 6.8x5.8x1.25in\u003c\/p\u003e\n\u003cp\u003eThe first module is addressed from 01 to 154 (MS-9600 Series only) while the remaining modules are automatically assigned to the next five higher addresses. On an MS-9050UD, MS9200, or MS-9200UDLS, the addressing would be 01 to 94. The modules have terminals for connection to an external supply circuit for powering devices on their notification appliance circuit (NAC). One or multiple power supplies may be used. Provisions are included for disabling a maximum of three unused addresses.\u003c\/p\u003e\n\u003cp\u003eEach control module features a short circuit-protection monitor to protect the external power supply against short circuit conditions on the NAC. When an alarm condition occurs, the relay which connects the external supply to the NAC will not be allowed to close if a short circuit condition currently exists on the NAC. Additionally, an algorithm is incorporated to find shorts when the module is active. Control modules will close all circuits that are not shorted to find the NAC with the problem.\u003c\/p\u003e\n\u003cp\u003eEach module has panel-controlled green LED indicators. The panel can cause the LEDs to blink, latch on, or latch off. The SYNC-1 accessory card provides the \u0026amp; control module with additional functionality. The control module is compatible with System Sensor®, SpectrAlert®, and SpectrAlert Advance audio\/visual devices.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSix addressable Style B (Class B) or three addressable Style D (Class A) outputs that function as notification appliance\/telephone circuits\u003c\/li\u003e\n\u003cli\u003eRemovable 18 AWG (0.821 mm²) to 12 AWG (3.31 mm²) \u0026amp; plug-in terminal blocks\u003c\/li\u003e\n\u003cli\u003eStatus indicators for each point\u003c\/li\u003e\n\u003cli\u003eUnused addresses may be disabled\u003c\/li\u003e\n\u003cli\u003eRotary address switches\u003c\/li\u003e\n\u003cli\u003eLiteSpeed® or CLIP operation\u003c\/li\u003e\n\u003cli\u003eOptional SYNC-1 accessory card for SpectrAlert and SpectrAlert Advance devices\u003c\/li\u003e\n\u003cli\u003eMount one or two modules in a BB-2F cabinet (optional)\u003c\/li\u003e\n\u003cli\u003eMount up to six modules on a CHS-6 chassis in a BB-6F or BB-25 cabinet (optional)\u003c\/li\u003e\n\u003cli\u003eMounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDocuments \u0026amp; Downloads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/df-52365.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF-300-6(A) Six Circuit Supervised Control Module and SYNC-1 Accessory Card Data Sheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/manuals-and-guides\/installation-guides\/I56-1874.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF-300-6 Six Supervised Control Module Installation Document\u003c\/a\u003e (Installation Manual)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/brochures\/Isolator_Load_Rating_Table.pdf\" target=\"_blank\" rel=\"noopener\"\u003eIsolator Load Rating Table Brochure\u003c\/a\u003e (Brochure)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/literature-and-specs\/datasheets\/hon-ba-fire-cmf-300-6-six-circuit-supervised-control-module-ul-datasheet-df-52365-c.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF-300-6\/6A Six Circuit Supervised Control Module (UL) Datasheet\u003c\/a\u003e (Data Sheet)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/prod-edam.honeywell.com\/content\/dam\/honeywell-edam\/hbt\/en-us\/documents\/manuals-and-guides\/user-manuals\/hon-ba-fire-cmf-300-6-six-circuit-supervised-control-module-ul-manual-i56-1874-017.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCMF-300-6 Six Circuit Supervised Control Module (UL) Manual\u003c\/a\u003e (User Manual)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fire-Lite","offers":[{"title":"Default Title","offer_id":43132873408736,"sku":"CMF-300-6","price":551.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/7186\/5312\/products\/fire-lite-modules-default-title-fire-lite-cmf-300-6-6-input-class-b-or-3-input-class-a-31896796463328.jpg?v=1793784164"}],"url":"https:\/\/thefirealarmsupplier.com\/collections\/fire-lite.oembed?page=11","provider":"The Fire Alarm Supplier","version":"1.0","type":"link"}